Cement 1 - Testing Equipment for Construction Materials

TESTING
��������� Subject to technical modification without notice.
1.0328.02 1.0328
1.0328 ( ��� /control unit)
1.0328.01(5x + ����� )
��� .
Order no.
1.0328
1.0328.01
1.0328.02
1.0328.03
1.0328.04
1.0328.05
1.0328.06
1.0328.07
1.0328.08
1.0328.09
Cement 1
��
�����������1 � 6 ������� ����
�EN EN 196-3 196-3
���������������� 5 ���
����
���������������������
�����������������
���������������������
�����
Automatic Vicat needle apparatus with 1 - 6
measuring points, EN 196-3
Consisting of a basic system with control unit
and up to 5 additional measuring points.
�������Each Vicat mould stands ��������
in a water bath with a
thermostat for regulation of the water temperature.
Each measuring point has a cleaning device
for the Vicat needle.
The control unit is equiped with a microprocessor
which enables fully automatic testing sequences.
�����������������230 V / 50
Hz�������� ����
EN 196-3
Basic device, complete, with electronic
control unit, 230 V / 50 Hz, 1 ph, EN 196-3
�����1 � 5 ��
����������
Additional measuring point (1 - 5 ea.)
For connection to the basic device
����������������+5°C �
+35°C������230 V / 50 Hz���
Thermostat for temperature control of the water
bath, +5°C to +35°C, including heating coil,
230 V / 50 Hz, 1 ph
����������
Additional heating coil per unit
��
Spare parts
���12 �������� 1.13 ��
1 set = 12 ea. Vicat needles, 1.13 mm diam.
���4 ������
1 set = 4 ea. felt-tip recorders
����100 �
100 sheets of plotting paper
���������� 70��� ����� ��
Vicat mould made of bronze, 70/80 mm dia. x 40
mm
����������
Water container for the Vicat mould
�������
TESTING Bluhm & Feuerherdt GmbH . Tel.: +49 30 / 755 90 94 . Fax: +49 30 / 755 90 98 . Internet: www.testing.de
1.15