2009 AFR Fork Owner's Manual - Specialized Bicycles

More documents

Recommendations

Info

WARNING! Never modify your frame or bicycle in any way. Do not sand, drill, fill, orremove parts. Do not install incompatible forks or suspension parts. An improperlymodified frame, fork, or component, can cause you to lose control and fall.CAUTION: Any modification of your frame, fork, or components means that yourbike no longer meets our specifications and therefore voids your warranty.FORK SETUP INFORMATIONWARNING! The Epic frame is compatible ONLY with single crown forks that have travelof 3.94” (100mm) or less. Use of different styled forks or forks with longer travel mayresult in catastrophic failure of the frame which may result in serious personal injuryor death.Certain Specialized frames are equipped with tapered head tubes with a 1 1/8” upperbearing and a 1.5” lower bearing. There are three different setup options with these headtubes.1. Specialized proprietary fork: Installs with no adapters.2. After-Market brand fork with 1 1/8” to 1.5” tapered steerer tube:• 1.5 slip-fit adapter to lower the bearing in the head tube (part # S09250004).• 1.5 Crown race (part # S092500005)• 1.5 lower bearing (part # S092500001).3. After- market fork with 1 1/8” steerer tube: Requires adapter part # 2009-9060This adapter presses into the head tube.SPECIALIZED 1 1/8” - 1.5” TAPERED MOUNTAIN BIKE HEAD TUBES1 1/8” to 1.5” drop-in integrated bearing head tube(All carbon frames, all Enduro FSR, Stumpjumper FSR 29er, Epic 29er)1.5” Bearing (52x40x7)Part #: S0925000011.5” Adapter fornon-Specialized 1.5” forksPart #: S0925000041.5” Bearing (52x40x7)Part #: S0925000011.5” Crown RacePart #: S0925000051.5” to 1 1/8” AdapterPart #: 2009-90601 1/8” Campy Bearing1 1/8” Crown Race1 1/8” to 1.5” Specializedcarbon steerer tube withbuilt-in crown race1 1/8” to 1.5”Steerer Tube1 1/8” Steerer Tube1 2 3NOTE: SX /SX Trail and Big Hit frames use external press-in cups4
SEAT POST SETUP INFORMATIONSEATPOST MINIMUM INSERTION: To prevent damage to the frame, it’s importantto have a minimum amount of seatpost in the seat tube.Carbon frames:Small / Medium - 70mm insertionLarge / X-Large - 100mm insertionAluminum frames:If you cannot see the seatpost tube through theseat tube hole, your seatpost is too far extended.If a greater saddle height is required, replace theseatpost with a longer one.SM/MD:70mmLG/XL:100mmFRAME FEATURES2791110148512631. Main Frame 5. Main Pivot 9. Lower Shock Eyelet2. Seatstay 6. Dropout (Horst) Pivot 10. Upper Shock Eyelet3. Chainstay 7. -Link @ Seatstay Pivot 11. Shock4. -Link 8. -Link @ Frame Pivot 12. Replaceable Derailleur Hanger5
Page 1: FSR OWNER’S MANUAL2010 S-WORKS /
Page 4 and 5: INTRODUCTIONCongratulations on your
Page 8 and 9: FRAME GEOMETRY1. Top Tube Length* 5
Page 10 and 11: FRAME GEOMETRY11089462375
Page 12 and 13: DERAILLEUR GUARD INSTALLATIONThe Sp
Page 14 and 15: CARBON FRAME INSTRUCTIONSThe Specia
Page 16 and 17: FRAME SCHEMATICSchematic #232.pSHOC
Page 18: SETUP DATADATERIDER WEIGHTFORK PSIF

2009 AFR Fork Owner's Manual - Specialized Bicycles

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?