Parallel Style Air Gripper: Wide Type

Series MHLSpecific Product PrecautionsBe sure to read before handling.Possible to mount from 2 directions.Axial MountingBody tappedMounting Air Grippers/Series MHL2Lateral mountingHow to Mount the Attachment to the FingerModelMHL2-10DMHL2-16DMHL2-20DMHL2-25DMHL2-32DMHL2-40DApplicable boltsM4 x 0.7M5 x 0.8M6 x 1M8 x 1.25M8 x 1.25M10 x 1.5Body ø10 to ø25Max. tighteningtorque (N·m)2.14.37.317.71836Max. screw-indepth (lmm)81012161620ModelMHL2-10DMHL2-16DMHL2-20DMHL2-25DMHL2-32DMHL2-40DApplicable boltsM4 x 0.7M5 x 0.8M6 x 1M8 x 1.25M8 x 1.25M10 x 1.5Max. tighteningtorque (N·m)1.42.84.812.012.024.0Max. screw-indepth (lmm)57771112(1) Make sure that the piston rod is retracted so asnot to apply undue strain on the piston rod whilean attachment is being mounted to the finger.(2) Do not scratch or dent the sliding portion of thepiston rod. Damage to the bearings or sealsmay cause air leaks or faulty operation.(3) Refer to the table below for the proper tighteningtorque on the bolt used for securing theattachment to the finger.Model Applicable boltsMHL2-10D M4 x 0.7MHL2-16D M5 x 0.8MHL2-20D M6 x 1MHL2-25D M8 x 1.25MHL2-32D M10 x 1.5MHL2-40D M12 x 1.75Max. tighteningtorque (N·m)1.42.84.812.024.042.2FingerAttachmentModelMHL2-10DMHL2-16DMHL2-20DMHL2-25DApplicable boltsM4 x 0.7M5 x 0.8M6 x 1M8 x 1.25Max. tighteningtorque (N·m)2.14.37.317.7488