Bae Hawk Operational Manual

Please read before operating this system!Wewould like thank you for purchasing our new product –Bae Hawkdesigned for the hobby enthusiast. Base on its full - scale counterpart,this Great British Jet can finish loops, inverted flight and rolls andother aerobatics easily. It is also made as a highly maneuverablemodel for the intermediate to expert pilot. With the Bae Hawk modelwhich includes EDF set*, speed controller, electric servos, retractablelanding gear with front steering and full scale functional lightingsystem. You will have joyful time in model flying.Remarks:* We have several different metal EDF sets for your selection.1) Cyclone power 64mm metal EDF is a higher grade EDF set whichis an aluminum alloy material EDF more powerful output, efficientand durability.2) Please be noticed that all servo have been pre-set the center pointbefore out of factory. It maybe appeared some difference due todifference brand mark radio control. Kindly make sure to do theadjustment (special to pre-set the travel throw of gear servo upto 110-115 %. ) with your own radio equipment before installationthis jet model.4) From main wing edge to center around 72mm±2mm is the CGpoint.5) Please make sure to use a little piece of attached magic sticker foryour LiPo battery for fixing on the battery bay before on flight.Specifications:Wing Span : 750mmLength:860mmFlying weight: 1.1kgServo: 9g×7pcsPower system: Brushless electrical metal ducted fan(3900kv/4300kv)Thrust: Up to 1.2kgFunction: 1) Retractable landing gear2)Lighting systemESC: 50A or aboveRadio: 5CH or aboveBattery: Li-po 14.8V/4S-2200mAH or above- 2 -