Operating Manual Electronic Column Scale M20610 - Dencor

Installation and use of scaleYour ADE scale is a quality product. In order to achieve best possible results please follow strictly theinstructions of this Operating Manual:Check carton contents- Weighing platform incl. column connection- Column- Display incl. connecting cable- Assembling material consisting of: Head plate with adhesive tape- Column cover plate- Screws- Mains adapter- Operating ManualAssembling:Remove all packing material and store same for use in case of warrantee claim.- First pull the connecting cable being connected to the display through the head plate (Velcroside up).- Lead the cable down the column (head plate still loose)- Place the column into the column connection- Use the plug connection and fix the cable using the cable holder- Mount column cover plate from underneath by using 3 of the screws and pull them tight.- Now fasten the head plate with 3 screws on the upper part of the column.- The display is finally connected to the head plate by using the Velcro.Before weighingPower supply of the scale: By mains adapter (12V 300 mA) and rechargeable batteries- The display is already equipped with rechargeable batteries.- To charge the power-pack for the first time please use the mains adapter.- Complete first charging needs 24 hrs.- Place the scale in its working area.- Make sure to place the scale on an even ground.- The scale is now ready for use.Caution:Please operate the scale only with the original ADE mains adapter that has been delivered.- Always fit the adapter to the scale BEFORE connecting to an electrical outlet- Disconnect from the electrical outlet BEFORE disconnecting the adapter from the scale.3 050100-Rev001-M20610