J Series brochure. - Christie Digital Systems

J Series3D mappingAmusementArenas/StadiumsBroadcastCorporateEnergyEvents/Large venuesGovernmentHigher educationHome theaterHouses of worshipManufacturingMedical trainingScientific researchAnd more…Designed with your image in mind.

6850-22,000 center lumensSXGA+ (1400 x 1050)HD (1920 x 1080)WUXGA (1920 x 1200)View the Christie J Series video1

Reliability isin its genes.Performanceis its genius.Superior performance, high brightness and crisp,clear images – these are what you expect in a Christie ®3-chip DLP ® projector. We’ve taken these features,added even more, and wrapped them up in the mostcompact chassis in its class. Welcome to the ChristieJ Series. This series of Christie projectors couples thebenefits of Xenon illumination – for the most naturalcolor accuracy and stability – with the next level oftechnology, performance and flexibility.Creating visually compelling displays is paramountto your success. That’s our business too, so we’vemade higher brightness, Christie Twist, 3Dupgradability and flexibility standard in this series.You’ll see we’ve upgraded our existing 3-chip DLPplatform with the features and functionality thatyou rely on to share, collaborate and create.We’ve kept your bottom line in mind, as well. We’vemade sure that this new series can use existing lenses 1 ,lamps, input cards 2 , stacking hardware and otherChristie accessories.The Christie J Series includes 2D and Mirage(3D-capable) models that are available in a broadrange of brightness levels and resolutions. Whetheryour application is in broadcast, energy, entertainment,government, higher education, houses of worship, liveevents, manufacturing or medical, choose the modelthat fits your needs and budget, and know that all thisis backed by Christie’s three-year warranty and ourindustry-leading service and support.1, 2 See note on page 12.2

Xenon IlluminationUp to 22,000lumens of XenonbrightnessYou’ve told us how much you loveXenon technology and we thinkwe know why. The continuous lightquality, stable color temperature,excellent color reproduction andrelatively little color shift give youeye-catching live displays, easilycombat other light sources in theroom and still wow your audiencestime and again. That’s reliability youcan trust.Available in brightness levels rangingfrom 8500 ANSI (9350 center) lumensthrough 20,000 ANSI (22,000 center)lumens and three resolutions, SXGA+(1400 x 1050), HD (1920 x 1080) andWUXGA (1920 x 1200), each modeloffers more brightness per poundthan the competition and ensuresthat your content can be shown inits native resolution, without scaling.Advantages of Xenon lampsProvides the highest level of on-screenperformance, both for brightness andcolor accuracyThe spectrum of a Xenon lamp resultsin relatively little color shift over timeA Xenon lamp emits a continuouswavelength spectrum of light throughoutthe visible range (roughly 400 nm to 700nm), which approximates the neutralwhite color of natural daylightReaches full brightness in far less timethan other lamp technologiesGreat for illuminating very large screensor high ambient environmentsXenon lamps have the best colorrendering index (CRI) of any lamptechnology out thereChristie J Series models 1ModelCenter ResolutionlumensChristie DS+10K-J 9350 SXGA+Roadster S+22K-J 22,000 SXGA+Roadster HD14K-J 13,200 HDRoadster HD16K-J 15,400 HDRoadster HD20K-J 20,000 HDRoadster WU20K-J 20,000 WUXGAOnly Xenon in its classChristie ® is the only manufacturer to offerXenon models that provide less than10,000 lumens. The 1.0kW and 1.2kWCermax ® lamps make it possible forus to provide models in the less than10,000-lumen category.Normalize1.00.80.50.3Xenon vs high pressure Mercury lampsYellow notch filter0.0350.00 400.00 450.00 500.00 550.00 600.00 650.00 700.00 750.00 800.00Available as an optional feature for allChristie J Series models, the yellow notchfilter is an optical color managementdevice that emulates film-like color. Itcreates greater separation betweenthe primary colors, RGB, resulting in alarger available color gamut for betterreproduction of skin tones and richercolor depth and saturation. This isespecially apparent in green and redtones, resulting in a more life-like displayon the screen. This color filter must befactory installed at time of purchase.Wavelength (nm)MercuryXenonOptional yellow notch filter is ideal forvideo applicationsTypicalcolor gamutExpandedYNF gamutThe Christie J Series offers the bestcolor performance of any product inthis market space.Standard color gamut Expanded color gamut1 Lumens values are for projectors that do not have yellow notch filter installed.3

Crisp, clean images time and againThere are many factors that determine the quality of an image – 3-chip DLP ® technology, high-qualityoptics and world-class 10-bit image processing ensure you display the best image. You need all of theseelements working together if you’re going to present clear, detailed, true-to-life images and information.The Christie J Series encompasses all of this and more. We’ve also added a dust-sealed engine andoptics to help protect your investment and keep maintenance costs low. Liquid cooling and athermal-feedback system keep your projector at a temperature that ensures optimal performance.TBD exceptional image quality3-chip DLP technologyImage qualityDust-sealed engineLiquid coolingBased on 3-chip DLP technology, high-qualityoptics and world-class 10-bit image processing,the Christie J Series delivers:High brightnessExcellent colorExcellent uniformityHigh reliability (>100,000 hours MTBF for DMDs)High contrastExcellent fill ratioChristie J Series projectors are designed withdust-sealed engines and optics. Since dust anddirt cannot affect the system, image quality ismaintained and maintenance costs are lower.Optional fog juice filters are available forprojectors exposed to harsh environments.Christie Roadster and Christie Mirage models (equippedwith a 2.0kW, 2.4kW or 3.0kW lamp) include a thermalfeedbacksystem and a liquid-cooling module forthe DMDs to continually maintain the projector’stemperatures in the correct operating range. Thisimproves the overall DMD performance and reliabilitywhen used in harsh environments. It also enables theprojector to operate in temperatures up to 104°F (40°C)allowing for use in less than ideal conditions.Liquid coolingSolomon Victory Theater National WorldWar II Museum, New Orleans, LA4

powerful featuresTaking performance to a new levelWe’ve embedded powerful features such as Christie ® Twist and an Intelligent Lens System (ILS), edge blendingand color matching capabilities to ensure that setup and maintenance of your displays are repeatable, quick andeasy. Monitoring and controlling your displays from a distance are made simple with our ChristieNET web interface.And, when you’re close to your projector our intuitive LCD keypad gives straightforward, easy access to manage yourdisplay. Additional hardware or software is no longer required; making your life easier.The Christie J Series platform supports existing stacking hardware, lenses 1 , input cards 2 and other Christie accessories(e.g. portrait lens adapter); as well, the new lamp modules for the Christie J Series can be used with legacy Xenonprojector models. This keeps money in your pocket and your displays amazing audiences.1, 2 See note on page 12.Grammy award winner Alicia Keys’ “As I Am” world tourEmbedded Christie TwistStandard in all Christie J Series models, Christie Twistenables seamless edge blending of multiple curvedimages faster and more easily than through traditional,manual methods. Controlled by an easy-to-use GUI, youcan expertly control and edge blend or stack multiplecurved images. As well, images can be warped to fitvirtually any dimension or shape display. EmbeddedChristie Twist ensures that all J Series projectors work withvalue-added accessories, such as Christie AutoStack.Easy-to-use GUI Easy-to-use GUI“For a recent show, I needed to project onto amulti-dimensional stage with two double-stackedChristie Roadster projectors. I used one PC-basedvideo server per projector to be able to fit thepredesigned image and content onto the stagesurface, as well as geometrical adjustments to eachimage independently in order to converge them all.If Christie Twist had been installed in the projectors,I could have used two computers instead of four,had less image lag, and it would have beencheaper and faster to get the job done. I now seethat it makes complete sense to have Christie Twiston every projector used in projection mappingdisplays because it makes set up easier, reduces thenumber of the video servers needed for the job anddecreases the failure points of the whole system.”Bart Kresa, BARTKRESA designIntelligent Lens System (ILS)The ILS automatically recognizes and calibrates a lenswhen it is installed. Stepper motor-based encodingensures that motor drift does not occur, as typicallyfound with DC encoded motors, providing accurateand repeatable recall of all lens offset, zoom and focuspositions. This lens system ensures that the imagesadjust to optimize screen coverage and maintainalignment in applications with moving screens orvariable aspect ratios.Image on curved screen –without blendingCurved screen – with blending5

ChristieNET web interface and Virtual On-Screen Display (OSD)ChristieNET enables users to access all projectormenus and controls through a web interface withoutdisrupting the live presentation. This allows for realtimeadjustments and monitoring of each projectoron the network – regardless of geographic location.It’s easy to set up and maintain the projector systemremotely. You don’t need to see the screen to set upthe system, making it ideal for applications where thescreen is rigged or far away. The menus do not show onthe projector screen so it won’t be a distraction duringlive performances. A new status screen shows alarms,lamp info, or any system information. The easy-to-useinterface lets you upload, backup and restore settings,as well as designate permission-based users.Main page controlsand informationVirtual On Screen Display(OSD): access full menustructure, remotelyWireless projection controlChristie wireless projector control brings projectionmanagement to your fingertips – literally – with wirelessprojector control applications for Apple ® iOS andAndroid-based mobile digital devices.The Christie InControl app lets you control Christieprojectors directly from your iPhone, iPad and iPod;The Christie Virtual Remote app offers the ability tomanage Christie projectors using your Android-basedmobile device.TBD powerful featuresEmbedded edge blending and color matchingAdvanced blending capabilities and ComprehensiveColor Adjustment (CCA) ensure digitally accurate colormatching and uniformity across multi-screen blended ortiled images.Color matchingEdge blendingStatus and diagnostics: displayalarm events for quick projectormonitoring and diagnosisOverlapping image edgesOverlapping image edgesAdmin screen includesupload, backup, restoreand moreThe two applications are designed to control anyChristie J Series and M Series projectors. Each projectorcan be controlled individually, or grouped together andcontrolled simultaneously. The Christie InControl appis available as a free download from the Apple AppStore. The Christie Virtual Remote is available as a freedownload from the Google Play store.Without edgeblendingWith edgeblendingColor matchingColor matchingEdge blendingEdge blendingOverlapping image edgesLiteLOCThe LiteLOC feature automatically manages yourdisplay’s brightness levels over time so that you canmatch the brightness of a multiple projector systemin tiled or blended arrays. This feedback systemcontinuously monitors lamp brightness so that, as thelamp goes through its natural brightness decay, thesystem increases the lamp power in order to maintainconsistent brightness.Without Lite LOC With Lite LOCLCD keypadThis easy-to-use LCD keypad includes:Contextual menus provide a fully-featured, intuitive interfacethat removes the need for a cluttered keypadLarge, four line LCD displayAdjustable brightness and timed LCD off modeIntuitive, user-friendly keypad design that lights up whenfeatures are activeActive keys are color-coded amber to indicate that selectionswill result in changes visible to the audience6

christie 3dChristie understands 3DToday, a wide range of applications make use of 3D technology to provide ahost of benefits – from decreased costs through virtual design prototyping,increased effectiveness while exploring oil deposits and wells, never-seenbeforeperspectives designed for medical and scientific research programs,or having fun at a theme park. But it’s not just any 3D technology that hasbeen used – only Christie ® has been there since the beginning. A truepioneer in the development of 3D projection technology, only Christie canoffer the expertise required for today’s emerging 3D display applications.Our Christie Mirage J Series of 3D-capable projectors offers completecompatibility with today’s 3D standards. They offer brightness levelsranging from 6200 ANSI (6850 center) lumens through 20,000 ANSI(22,000 center) lumens and contrast ratios that include SXGA+ (4:3), HD(16:9) and WUXGA (16:10). The most compact 3-chip DLP ® active stereoprojectors in their class, this series of projectors delivers crisp, detailedimages with excellent color and brightness.These projectors offer complete compatibility with today’s 3D homeentertainment requirements and are ready for Blu-ray 3D video, PS3 andother gaming consoles, meeting the mandatory 3D spec for HDMI v1.4a. Toensure your 3D solution is complete, Christie also offers a range of accessoriesthat include: 3D glasses (active and passive), emitters and modulators.Powered by dual image processing, the Christie Mirage J Series displaysfull resolution at a native frame rate up to 120Hz. Two standard Dual link DVIinput cards support 330 MHz bandwidth for full resolution Dual input 3D.For the ultimate home theater including Blu-ray 3D video content, theChristie Mirage J Series uses triple flash to provide the best imagespossible, no matter how fast motion your content might be. You can counton Christie to ensure the highest image quality and a comfortable theaterlikeviewing experience.University of Reims Champagne-Ardenne (URCA),3D display used for scientific research and developmentChristie Mirage J Series models 1Model Center lumens ResolutionMirage S+22K-J 22,000 SXGA+Mirage HD14K-J 13,200 HDMirage HD16K-J 15,400 HDMirage HD20K-J 20,000 HDMirage WU7K-J 6850 WUXGAMirage WU14K-J 13,200 WUXGAMirage WU20K-J 20,000 WUXGAView the ChristieMirage J Series video1 Lumens values are for projectors that do not have yellow notch filter installed.7

Active stereoscopic viewing viewing – single – single projector projectorPassive stereoscopic viewing – stacked projectorsactive stereo 60Hz DLP projectorsimage generatoractive stereo DLP projectorwemitterpassivemodulatorviewer wearing active glassesscreencompatiblepolarized screenPassive stereoscopic Active stereoscopic viewing viewing – single viewing – single projector – multiple projector projectorsimage generatoractive stereo DLP projectoremitterpassive0 modulatorviewer wearing passive glassesactive stereo DLP projectors(rear projection)Active stereoscopic viewing – single projectorviewer wearing active glassescompatiblepolarized screencompatiblescreenimage generatorPassive stereoscopic viewing – stacked projectorsactive stereo 60Hz DLP projectorspassivemodulatorChristie Mirage J SeriesIn addition to offering the highest brightnessand a variety of resolutions while operatingat a full 120Hz, the Christie Mirage J Series isflexible in terms of its input capabilities, and thetype of stereo you wish to utilize. The Christieimage generator viewer wearing passive glassesMirage J Series creates stunning 3D imageryfrom a single projector whether you want to runcommercial-grade 3D inputs like native 60Hzper eye or the latest consumer standards likeBlu-ray triple flash or broadcast side-by-side.Active stereoscopic viewing – multiple projectorsTBD christie 3dcompatiblepolarized screenimage generatorviewer wearing passive glassesactive stereo DLP projectorActive stereoscopic viewingemitterPassive stereoscopic viewingviewer wearing active glassesActive stereoscopic viewing – multiple projectorsActive stereoscopic viewing – multiple projectorsemitterviewer wearing active glassescompatiblescreenscreenActive stereoscopic displays provide the best 3Dimagery available today. Active stereo is typicallyused for applications where life-like color reproductionand finite detail are required for precise content inkey decision-makingimage generator viewer wearingapplications.active glassesOffering the mostdetailed and life-like 3D images, the Christie MirageJ Series uses Xenon-based illumination for the bestcolor reproduction and can be used with ChristieMirage 3D active stereoscopic accessories, includingan emitter and LCD shutter glasses. For applicationsthat require a larger display for 1:1 scale visuals, you canuse multiple Christie Mirage J Series projectors blendedinto a single, larger display.emitterWhen it comes to 3D for a larger crowd, passivestereoscopic displays offer the best return on investment.Using low-cost polarized glasses that can be given awayor recycled after a single use, a passive stereo display is acost effective way to deliver quality 3D images. Combinea silver screen and Christie Mirage J Series projectorswith Christie Mirage 3D accessories, including ourpassive modulator and circular polarized 3D glasses,and you can bring incredible active stereo eye-popping DLP projectors 3D to eventhe largest of audiences!Active single projector versusstacked dual projectors(rear projection)compatiblescreenimage generatoractive stereo DLP projectors(rear projection)image generatorSingle, active 3D projection eliminates the need tostack, align and color match projectors and continuallymonitor and match brightness of two projectors forconsistent left eye/right eye display. Typically forcomparable brightness, single active 3D projectionwill operate with less noise, heat, physical spacerequirements and consumables along with fewer failurepoints and overall lower power consumption.8

christie 3dSource Input signal type Dual DVIinput cardDVI-DData/Graphics frame sequential – native 3D • Range 96-120Hz (48-60Hz per eye, >165MPixels < 330M Pixels)VGA HDMI AnalogBNC inputcard RGB/YPrPb• • •SDI• Range 96-120Hz (48-60Hz per eye,

Benefits of 3DTBD christie 3dChristie 3D active glasses Christie 3D passive glassesProvides perspective not possible withtraditional 2D software and toolsReduces time to marketExcites audiences … WOW! factorAccelerates understanding and decision makingEnables faster, more intuitive interaction with dataPromotes collaboration and focus on collective strengthsEnsures greater accuracy of concepts and designsRemoves inherent boundaries found in traditional toolsEmitter (active) – standard and long range Modulator (passive)3D AccessoriesDescriptionPart numberActive stereo Glasses – single • 108-407102-XXGlasses – 10 pack• 108-409104-XXEmitter – standard range • 108-410106-01Emitter – long range • 108-415101-01Passive stereo Glasses – single • 108-412108-XXDepthQ polarization modulator• 108-411107-XX10

obust, flexible designDesigned towork with youChristie ® J Series is designed withmany robust features that take someof the complexities out of your job.The easy-to-use lamp insertionmechanism lets you replace thelamp yourself quickly and easily.The portrait display adapter givesyou the option to create displays inportrait orientation with 1.0kW or1.2kW models, while the ChristieRoadster models have built-inportrait capabilities. Even if youhave existing rigging and stackingmounts, lenses 1 , lamps, input cards 2 ,stacking hardware and other Christieaccessories you can use them withthe Christie J Series.Optional portraitdisplay adapterRigging and stackingChristie Roadster models havebuilt-in portrait capabilitiesChristie’s stacking kit enables you tostack up to a maximum of three of theprojectors (equipped with a 1.0kW or1.2kW lamp) into a light-weight, sturdyframe. Customers with existing stackingmounts and hardware can use the sameequipment with Christie J Series models.This means that you can effortlessly stacka Christie Roadster S+20K with a ChristieRoadster S+22K-J, for example.Portrait capabilitiesStack projectors for redundancy oradditional brightnessChristie 3-chip DLP ® projectors offer theflexibility to project in portrait orientation.For models using a 1.0kW or 1.2kW lamp,the portrait display adapter makes thechange in orientation easy. The adapterattaches to the projector’s lens andenables you to project the image inportrait orientation instead of landscape.Christie Roadster models have built-inportrait capabilities and do not requirethe portrait display adapter.Stacking kitBulb replacementReduce your cost of ownership byreplacing only the bulb – not the entirelamp module assembly (for modelsequipped with a 2.0kW, 2.4kW or3.0kW lamp).Hybrid stackThe stacking frame can also connect tothe integral rigging points on any ChristieRoadster model for a hybrid stack witha model that uses a 1.0kW or 1.2kWlamp. Adjustable mount wheels aidin projector alignment.Setup lightsChristie Roadster and Christie Miragemodels (equipped with a 2.0kW, 2.4kWor 3kW lamp) include ‘conveniencelights’ that allow for easy set up indark environments.Easy-to-use lamp insertion mechanismSetup lights11

Fog filterCT lens mountLegacy compatibilityLensesLampsInput cardsRigging andstackingThe ILS lens adapter kit enables you to convert your existing CT 1 lenses to function with Christie J Series projectors.The conversion kit includes complete instructions and allows you to make the change in the field.Christie J Series models can be shipped with a CT 1 lens mount option (must be specified at time of purchase) to allow youto continue using existing CT lenses.Legacy Xenon lamp modules are compatible with the Christie J Series projectors.The new lamp modules for the Christie J Series with lamp memory cards, contain a serial number and hours of useinformation to make inventory and usage tracking quick and easy in all Christie J Series projectors. Lamp hour trackingcapabilities are not enabled in legacy models.The input cards 2 used in Christie M Series projectors are also compatible with Christie J Series models.Customers with existing stacking mounts and hardware can use the same equipment with the Christie J Series models.ROBUST, FLEXIBLE DESIGNFog filter optionsEnvironmental commitmentTo help extend the life of your projectorand protect your investment, optional fogjuice filters are available for environmentsthat require more than the protection ofour dust-sealed engine.The design of the fog juice filter kits –attached to the projector – reduces theaffects of the oil or juice created by fog,smoke, hazers and pyrotechnics. Thesekits include easy-to-install external mediamounts and one set of filters (internal andexternal). The life of the filters depends onthe amount of bi-product captured, butthey typically can last up to 20 hours.Serviceability and supportAll Christie 3-chip DLP projectors shipstandard with a three-year warranty on partsand labor (including light engine).We recognize our responsibility to controlthe impact our business activities, productsand services have on the environment.We’re fully committed to finding andusing environmentally friendly solutions,and to meeting or exceeding applicablelaws, regulations and organizationalobjectives. You’ll notice that the ChristieJ Series includes features that support ourcommitment to being eco-friendly.As an industry leader, we are committed tothe prevention of pollution and continualimprovement through implementationof our ISO14001 registered environmentalmanagement system.EfficiencyThe lamps used in Christie J Seriesprojectors produce the highest lumensper watt, enabling brighter imageswithout additional power requirements.As well, liquid cooling with the thermalfeedbacksystem in the Christie Roadsterand Christie Mirage models (equippedwith a 2.0kW, 2.4kW or 3.0kW lamp),improves performance and enablesthe projectors to run cooler in harshenvironments, using less power to keepthe DMDs cool. DLP projectors offerhigher brightness from smaller units andconsequently use less power to achievethe same levels of brightness.Auto shut-off and eco modeReduce your cost of ownership byreducing power consumption andextending lamp life when the projectorisn’t being used. These projectors can runin eco mode, which reduces brightnessand therefore reduces your powerrequirements and extends the life ofyour lamp. A reduction in the projector’sthermal output minimizes energy useand possible air-conditioning needs.Low power standby modesStandby power consumption(phantom power draw) is less than 30W.Bare bulb replacementYou can replace lamps instead ofthe entire lamp module assembly,reducing unnecessary waste and extrashipping requirements.1 CT refers to the suite of lenses available for use with Christie’s legacy Xenon platform. Note: ILS capabilities are not available with CT lenses and lens mount.2 Legacy input cards are not compatible with Christie J Series models.12

Accessories and OptionsExpandedlens suiteThis full suite of fixed, short zoomand long zoom lenses for SXGA+,HD and WUXGA resolutions,provides the broadest range oflenses in this marketplace.Screen WidthThrow Ratios – SXGA+Screen Diagonalm ft12.0 40.010.5 35.09.0 30.07.5 25.06.0 20.04.5 15.03.0 10.01.5 5.00 0ILS Lens | 0.73:1 SX+/0.67:1 HDILS Lens | 1.2:1 SX+/1.1:1 HDILS Lens | 1.5-2.0:1 SX+/1.4-1.8:1 HDILS Lens | 1.25-1.6:1 SX+/1.16-1.49:1 HDILS Lens | 2.0-2.8:1 SX+/1.8-2.6:1 HDILS Lens | 2.8-4.5:1 SX+/2.6-4.1:1 HDILS Lens | 4.5-7.5:1 SX+/4.1-6.9:1 HDILS Lens | 7.5-11.2:1 SX+/6.9-10.4:1 HD0 0Projection Distanceft 0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100ft m50.0 15.043.8 13.137.5 11.331.3 9.425.0 7.518.8 5.612.5 3.86.3 1.9m0 3.0 6.0 9.0 12.0 15.0 18.0 21.0 24.0 27.0 30.0Screen Widthm ft12.0 40.0Throw Ratios – HD/WUXGAHDScreen Diagonalft m45.9 13.8WUXGAScreen Diagonalft m47.2 14.2LensesILS Lens 0.73:1 SX+/0.67:1 HDILS Lens 1.2:1 SX+/1.1:1 HDILS Lens 1.25-1.6:1 SX+/1.16-1.49:1 HDILS Lens 1.5-2.0:1 SX+/1.4-1.8:1 HDILS Lens 2.0-2.8:1 SX+/1.8-2.6:1 HDILS Lens 2.8-4.5:1 SX+/2.6-4.1:1 HDILS Lens 4.5-7.5:1 SX+/4.1-6.9:1 HDILS Lens 7.5-11.2:1 SX+/6.9-10.4:1 HDPart number118-100110-XX118-100117-XX118-100111-XX118-100112-XX118-100113-XX118-100114-XX118-100115-XX118-100116-XX10.59.07.56.04.53.01.5035.030.025.020.015.010.05.00ftILS Lens | 0.73:1 SX+/0.67:1 HDILS Lens | 1.2:1 SX+/1.1:1 HDILS Lens | 1.5-2.0:1 SX+/1.4-1.8:1 HDILS Lens | 1.25-1.6:1 SX+/1.16-1.49:1 HDILS Lens | 2.0-2.8:1 SX+/1.8-2.6:1 HDILS Lens | 2.8-4.5:1 SX+/2.6-4.1:1 HDILS Lens | 4.5-7.5:1 SX+/4.1-6.9:1 1HDILS Lens | 7.5-11.2:1 SX+/6.9-10.4:1 HD0Projection Distance0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 10040.234.428.722.917.211.55.712.010.38.66.95.23.41.7041.335.429.523.617.711.85.9012.410.68.87.15.33.51.80m0 3.0 6.0 9.0 12.0 15.0 18.0 21.0 24.0 27.0 30.07.5-11.2:1 SX+/6.9-10.4:1 HD4.5-7.5:1 SX+/4.1-6.9:1 HD0.73:1 SX+/0.67:1 HD1.2:1 SX+/1.1:1 HD1.25-1.6:1 SX+/1.16-1.49:1 HD1.5-2.0:1 SX+/1.4-1.8:1 HD2.0-2.8:1 SX+/1.8-2.6:1 HD2.8-4.5:1 SX+/2.6-4.1:1 HDDistanceWidthHeightThrow distance values are subject to a -/+ 5% lens tolerance.13

Analog input card DMX512 interface card Dual link DVI input card Dual 3G SD/HD-SDI input card Video decoder input card Twin HDMI input cardAccessories and OptionsInput cardsLampsDescription1.0kW Cermax Xenonpre-aligned lamp module1.2kW Cermax Xenonpre-aligned lamp module2.0kW Xenon bubble lamp module2.0kW Xenon lamp bare bulb kit2.4kW Xenon bubble lamp module2.4kW Xenon lamp bare bulb kit3.0kW Xenon bubble lamp module3.0kW Xenon lamp bare bulb kitBulb alignment toolPart number003-120117-XX003-120116-XX003-120135-XX03-000887-XX03-900518-XX03-000883-XX003-000306-XX003-000305-XX38-804900-XXInput cards Analog input 108-309101-XXDual link DVI inputVideo decoder inputDual 3G SD/HD-SDI inputTwin HDMI inputDMX512 interface108-312101-XX108-310101-XX108-313101-XX108-311101-XX108-314101-XXOther ILS lens adapter kit 108-331108-XXPortrait display adapterFog juice filtersCeiling mount 1Ceiling mountCeiling mount extensionStacking kitEdge blending kitRemote IR sensor118-116109-XX132-114107-XX104-100001-XX104-104001-XX104-101001-XX104-117101-XX104-102101-XX104-106101-XXEach projector is equipped with four input card slots to ensure flexibility and compatibility with a variety of signals.The input cards used in Christie ® J Series projectors are also compatible with the Christie M Series models.Analog input cardThe Analog input card accepts an analog videosignal input over a 5 BNC connector interface. It canaccept RGBH&V signals over 5 connectors, as well ascomponent YPbPr signals on the RGB inputs.DMX512 interface cardThis interface card supports the DMX512communication standard through two 5-pin XLRconnectors.Dual link DVI input cardThe Dual link DVI input card has a 15-pin VGAconnector for analog signals and a DVI-I connectorwhich can support a single or dual link DVI HDCPvideo signal. This input card can also support 2Dand 3D signals up to 330 MHz.Dual 3G SD/HD-SDI input cardThe Dual 3G SD/HD-SDI input card accepts bothstandard-definition (SD) and high-definition (HD)serial-digital-interface (SDI) signals, and enables youto connect two of either types of signal. Both single-linkHD and dual-link HD signals are accepted. This cardalso has two 3G SD/HD-SDI outputs to enable“loop-through” for its respective input.Video decoder input cardThe Video decoder input card accepts various typesof standard definition (SD) video, including CVBS(composite video), S-video, and component. It acceptsNTSC 3.58, NTSC 4.4, PAL, PAL-N, PAL-M or SECAMformats. This card has two mini-DIN connectors (forS-video signals) and four BNC connectors that can begrouped to allow combinations of CVBS, S-Video, YPrPbor RGB video sources.Twin HDMI input cardThe Twin HDMI input card accepts two HDMI inputsand provides 12-bit deep color handling on the input.It also supports the HDMIv1.4a format required for 3Dsystems providing the projector is upgraded with 3Dcapabilities. Additionally, advanced loop-through allowsany input on any input card to be looped through to thetwo HDMI outputs on the card.This functionality ensures that when stacking systemswith any input (DVI, RGBHV or HDMI), the Twin HDMIcard can be used to send the signal to a secondprojector. This stacked system is also a passive loopthroughproviding the repeater projector has AC power,even when powered off, the signal will continue to belooped out to the second projector.1 For models equipped with a 1.0kW or 1.2kW lamp14

technical specificationsImage brightness • 8500 ANSI lumens(9350 center lumens)DisplaytechnologycontrastDS+10K-J Roadster S+22K-J Roadster HD14K-J Roadster HD16K-J Roadster HD20K-J• 1600-2000:1 full field | 650:1 ANSI• 20,000 ANSI lumens(22,000 center lumens)• 12,000 ANSI lumens(13,200 center lumens)uniformity • 90% brightness uniformity • 80% brightness uniformitytype• 3-chip 0.95" DMDnative resolution • SXGA+ (1400 x 1050) • HD (1920 x 1080)Lamp type • 1.2kW Cermax Xenonpre-aligned lamp module• 3.0kW Xenonbubble lamp module• 2.0kW Xenonbubble lamp module• 14,000 ANSI lumens(15,400 center lumens)• 2.4kW Xenonbubble lamp moduleestimated life • 1500 hrs • 750 hrs • 1000 hrs • 750 hrs • 750 hrsInput standard • Analog • Dual link DVI • Analog • Dual link DVI • Dual 3G SD/HD-SDI I • Video Decoderoptionalsignalspixel clockscan ratesControl and networking• Analog • Dual link DVI • Dual 3G SD/HD-SDI • Video Decoder • Twin HDMI• HDTV formats VGA through to QXGA (2048 x 1536) • Accepts all current HDTV/DTV formats • Multi-standard video decoder • Horizontal and vertical scaling, all inputs• 165 MHz (330 MHz high bandwidth mode)• Horizontal: 15-120kHz • Vertical: 23.97-150Hz• 18,000 ANSI lumens(20,000 center lumens)• 3.0kW Xenonbubble lamp module• RS232 in/out • RS422 in • Ethernet (10/100) • USB Device • GPIO (RS232 9 Pin male connector) • Built-in backlit LCD keypad • Remote control (with optional wired XLR connection)Lenses fixed • ILS Lens 0.73:1 SX+/0.67:1 HD* • ILS Lens 1.2:1 SX+/1.1:1 HDzoom• ILS Lens 1.25-1.6:1 SX+/1.16-1.49:1 HD** • ILS Lens 1.5-2.0:1 SX+/1.4-1.8:1 HD • ILS Lens 2.0-2.8:1 SX+/1.8-2.6:1 HD • ILS Lens 2.8-4.5:1 SX+/2.6-4.1:1 HD • ILS Lens 4.5-7.5:1 SX+/4.1-6.9:1 HD• ILS Lens 7.5-11.2:1 SX+/6.9-10.4:1 HDoffsets • ±100% Vertical • ±50% Horizontal • (* ±23%V ± 13%H) • (** ±70%V ±45%H) • ±120% Vertical • ±54% Horizontal • (* ±35%V ±12%H) • (** ±102%V ±40%H)Accessories standard • IR remote • Line cordoptionalEnhanced feature setsPowerrequirements(Dual lampmode)• Analog input card • Dual link DVI input card • Video decoder input card • Dual 3G SD/HD-SDI input card • Twin HDMI input card • DMX512 interface card ILS lens adapter kit• Portrait display adapter (1.0kW and 2.0kW models only) • CT lens mount 1 • Yellow notch filter 1 • Fog juice filters (Roadster models only) • Ceiling mount • Ceiling mount extension• Stacking kit (1.0kW and 1.2kW models only) • Edge-blending kit • Remote IR sensor • Bulb alignment tool • Christie AutoStack (optional curve module available) • 3D upgrade kits 2• Embedded Christie Twist • Embedded image tiling • Intelligent Lens System (ILS) • 3D upgradable 2 • Advanced block artifact reduction • ChristieNET Web interface• User-friendly, intuitive LCD keypad • User-replaceable lamps 2 • Advanced loop-through twin HDMI card • Lamp memory module • Advanced, 10-bit processing• Automatic shut-off and ECO mode • Dust-sealed light engine • SNMP (simple network management protocol) • DHCP (dynamic host configuration protocol)• 24/7 operation • Hybrid stack • Compatibility with existing accessories • Liquid cooling 2 • Setup lights 2 • Built-in portrait capabilities 2operating voltage • 200-240 VAC @ 50/60Hz • 200-240 VAC @ 50/60Hzmaximum operating current • 10A @ 200V • 20A @ 200V • 14A @ 200V • 16A @ 200V • 20A @ 200Vpower • 2000W • 4000W • 2800W • 3200W • 4000Wdissipation • 6830 BTU/hr • 13,650 BTU/hr • 9560 BTU/hr • 10,925 BTU/hr • 13,650 BTU/hrDimensions size • (LxWxH): 22.3 x 26.0 x 12.9"• (LxWxH): 32.0 x 24.5 x 16.5" (815 x 621 x 419mm)(566 x 660 x 328mm)shipping size • (LxWxH): 33.5 x 30.0 x 26.0"• (LxWxH): 41.0 x 32.5 x 29.5" (1041 x 825 x 749mm)(851 x 762 x 660mm)weight • 88lbs (40kg) (without lens) • 160lbs (72.5kg) (without lens)shipping weight • 125lbs (57kg) • 200lbs (91kg)Operating environment• Temperature: 40-104°F (5-40°C) • Humidity: 20-80% non-condensingRegulatory approvals • Regulatory Approvals/Markings: Directives (EC) 2011/65/EU (RoHS); 2012/19/EU (WEEE); Regulation (EC) No. 1907/2006 (REACH) • CAN/CSA C22.2 No. 60950-1 • UL 60950-1 • IEC 60950-1• FCC, Part 15, Subpart B, Class A • EN55022/CISPR22 Class A • EN55024 / CISPR24• Certifications marks (check with CDS for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia), KC (Korea), PSE (Japan), C-Tick (Australia & New Zealand), South AfricaLimited warranty• Three years parts and labor (including light engine)1 Factory installed at time of purchase.2 Does not apply to DS+10K-J.3 Dimensions A, B and C are based on the lens being used.15

Roadster WU20K-J• 18,000 ANSI lumens(20,000 center lumens)10.82]5.27] 294.4 [11.59]• 3-chip 0.96" DMD• WU (1920 x 1200)113.3 [4.5]• CENTER OF GRAVITY3.0kW Xenon (WITHOUT LENS)bubble lamp module•37.1 [1.46]750 hrs22.0 [.87]30.0 [1.18]529.8 [20.86]• ±112% Vertical • ±54% Horizontal• (* ±22%V ±6%H) • (** ±82%V ±38%H)• 20A @ 200V• 4000W• 13,650 BTU/hr566 [22.3]113.3 [4.5]CENTER OF GRAVITY(WITHOUT LENS)RIGGING POINTS7X M10X1.5 11.25 [0.4]HOLES MARKED 'D'343.3 [13.52]285.0 [11.22]240.0 [9.45]0.0 [.00]196.0 [7.72]207.5 [8.17]190.0 [7.48]DD0.0 .[00]30.0 [1.18]DDD398 [15.7]155.0 [6.10]189.0 [7.44]221.7[8.73]77.8 [3.06] 134.0 [5.27] 294.4 [11.59]117.2 [4.62]184.1 [7.25]274.8 [10.82]DD660 [26.0]464.2 [18.3]330 [13.0]CENTER OF GRAVITY(WITHOUT LENS)283 [11.1]CENTER OF GRAVITY(WITHOUT LENS)63 [2.5] DIMENSION 'A'DIMENSION 'C'DIMENSION 'B'529.8 [20.86]292 [11.5]157.7[6.2]584 [23.0]113.3 [4.5]CENTER OF GRAVITY(WITHOUT LENS)22.0 [.87]30.0 [1.18]37.1 [1.46]Front viewSide view 3310 [12.2]CENTER OF GRAVITY566 [22.3]113.3 [4.5]CENTER OF GRAVITY(WITHOUT LENS)RIGGING POINTS7X M10X1.5 11.25 [0.4]HOLES MARKED 'D'343.3 [13.52]285.0 [11.22]240.0 [9.45]37.8 [1.5]464.1[18.3]190.0 [7.48]D0.0 .[00]30.0 [1.18]D155.0 [6.10]189.0 [7.44]221.7[8.73]D178.5 [7.0]274.8 [10.82]292 [11.5]328[12.9]63 [2.5] DIMENSION 'A'DIMENSION 'C'DIMENSION 'B'310 [12.2]Top viewCENTER OF GRAVITYCENTER OF GRAVITY566 [22.3]566 [22.3]77.8 [3.06] 134.0 [5.27]274.8 [10.82] 294.4 [11.59]77.8 [3.06] 134.0 [5.27] 294.4 [11.59]113.3 [4.5]117.2 [4.62]660 [26.0]CENTER OF GRAVITY113.3 [4.5](WITHOUT 113.3 [4.5] LENS)464.2 [18.3] CENTER OF GRAVITY117.2 [4.62]UnderneathCENTERviewOF GRAVITY(WITHOUT330 [13.0]113.3 [4.5] LENS)(WITHOUT LENS)184.1 [7.25]CENTER OF GRAVITYCENTER OF GRAVITY(WITHOUT LENS)(WITHOUT LENS)184.1 [7.25]37.1 [1.46]22.0 [.87]529.8 [20.86]37.1 [1.46]283 [11.1] 30.0 [1.18]RIGGING POINTSCENTER OF GRAVITY22.0 [.87]7X M10X1.5 11.25 [0.4]529.8 [20.86](WITHOUT LENS) 30.0 [1.18]HOLES RIGGING MARKED POINTS'D'7X M10X1.5 11.25 [0.4]HOLES MARKED 'D'343.3 [13.52]343.3 285.0 240.0 [13.52][11.22][9.45]285.0 [11.22]240.0 [9.45]0.0 [.00]0.0 [.00]196.0 [7.72]37.8 [1.5]196.0 207.5 [8.17] [7.72]464.1[18.3]207.5 [8.17]190.0 190.0 [7.48] [7.48]D178.5 [7.0]DDD0.0 .[00] 0.0 .[00]30.0 30.0 [1.18] [1.18]D328[12.9]DD398 [15.7]155.0 155.0 [6.10] [6.10]189.0 189.0 [7.44] [7.44]221.7[8.73]DD464.2 [18.3] 660 [26.0]330 [13.0]CENTER OF 464.2 GRAVITY [18.3](WITHOUT 330 [13.0] LENS)CENTER OF GRAVITY(WITHOUT LENS)283 [11.1]CENTER OF GRAVITY(WITHOUT 283 [11.1] LENS)CENTER OF GRAVITY(WITHOUT LENS)63 [2.5] DIMENSION 'A'DIMENSION 'B'DIMENSION63 [2.5]'C' DIMENSION 'A'DIMENSION 'B'DIMENSION 'C'DDD398 [15.7]DD292 [11.5]292 [11.5]584 [23.0]157.7[6.2]157.7[6.2]584 [23.0]660 [26.0]technical specifications310 [12.2]310 [12.2]330.0 [.00]D584 [23.0]196.0 [7.72]207.5 [8.17]DDD157.7[6.2]398 [15.7]16

technical specificationsImage brightness • 6200 ANSI ANSI lumens(6850 center lumens) @ 220V• 4650 ANSI lumens(5100 center lumens) @ 110VDisplaytechnologycontrastMirage WU7K-J Mirage S+22K-J Mirage HD14K-J Mirage HD16K-J Mirage HD20K-J• 1600-2000:1 full field | 650:1 ANSI• 20,000 ANSI lumens(22,000 center lumens)• 12,000 ANSI lumens(13,200 center lumensuniformity • 80% brightness uniformity • 90% brightness uniformity • 80% brightness uniformitytype • 3-chip 0.96" DMD • 0.95" DMDnative resolution • WUXGA (1920 x 1200) • SXGA+ (1400 x 1050) • HD (1920 x 1080)frame delay• As low as one frameLamp type • 1.0kW Cermax Xenon pre-aligned lamp module • 3.0kW Xenonbubble lamp module• 2.0kW Xenonbubble lamp module• 14,000 ANSI lumens(15,400 center lumens]• 2.4kW Xenonbubble lamp moduleestimated life • 1500 hrs • 750 hrs • 1000 hrs • 750 hrs • 750 hrsInput standard • Slot 1-2 populated, standard: two Dual Link DVI-D (330 MHz) input cards (each has VGA (165 MHz) for 3D or dual input 3D compatibility) with HDMI 1.3 receiver Slot 3-4 unpopulatedoptionalsignalspixel clockscan ratesControl and networkingOptical system• Analog • Dual link DVI • Dual 3G SD/HD-SDI • Video decoder • Twin HDMI• 18,000 ANSI lumens(20,000 center lumens)• 3.0kW Xenonbubble lamp module• HDTV formats VGA through to QWXGA (2560 x 1600) • Accepts all current 2D HDTV/DTV formats (optional input cards may be required)• HDMI 1.3 receiver supports mandatory HDMI 1.4a 3D modes of operation plus 24-144Hz triple flash 3D mode • Multi-standard video decoder • Horizontal and vertical scaling, all inputs• 330 MHz• Horizontal: 15-120kHz • Vertical: 23.97-150Hz (frame lock maximum 120Hz) • 48-60Hz frame doubled or dual input 3D • 48Hz (24Hz per eye) frame triple flash• 96-120Hz frame rate up to 1920 x 1200 • 24-144Hz triple flash 3D• RS232 in/out • RS422 in • Ethernet (10/100) • USB Device • GPIO (RS232 9 Pin male connector) • Built-in backlit LCD keypad • Remote control (with optional wired XLR connection)• Dust-sealed 3-chip DMD light engine • Motorized horizontal and vertical lens offset • Scheimpflug/Boresite (tilt) adjustment • Built-in light shutter • Tool-free lens insertion systemLenses fixed • ILS Lens 0.73:1 SX+ / 0.67:1 HD* • ILS Lens 1.2:1 SX+ / 1.1:1 HDzoom • ILS Lens 1.25-1.6:1 SX+ / 1.16-1.49:1 HD** • ILS Lens 1.5-2.0:1 SX+ / 1.4-1.8:1 HD • ILS Lens 2.0-2.8:1 SX+ / 1.8-2.6:1 HD • ILS Lens 2.8-4.5:1 SX+ / 2.6-4.1:1 HD• ILS Lens 4.5-7.5:1 SX+ / 4.1-6.9:1 HD • ILS Lens 7.5-11.2:1 SX+ / 6.9-10.4:1 HDoffsets• ±112% Vertical • ±54% Horizontal• (* ±22%V ±6%H) • (** ±82%V ±38%H)Accessories standard • IR remote • Line cordoptionalEnhanced feature setsPowerrequirements(Dual lampmode)• ±100% Vertical • ±50% Horizontal• (* ±23%V ±13%H) • (** ±70%V ±45%H)• ±120% Vertical • ±54% Horizontal• (* ±35%V ±12%H) • (** ±102%V ±40%H)• ILS lens adapter kit • CT lens mount 1 • Yellow notch filter 1 • 3D glasses (active and passive) • 3D active emitter • 3D passive modulator • Fog juice filters 2 • DMX512 interface card• Analog input card • Dual link DVI input card • Dual 3G SD/HD-SDI input card • Video decoder input card • Twin HDMI input card • Remote IR sensor • Bulb alignment tool 2 • Bare bulb kit 2• Ceiling mount • Ceiling mount extension • Stacking kit 3• Embedded Christie Twist • Embedded image tiling • Intelligent Lens System (ILS) • Advanced block artifact reduction • ChristieNET web interface • User-friendly, intuitive LCD keypad• Advanced loop-through Twin HDMI card • Lamp memory module • User replaceable bulbs (2.0kW, 2.4kW and 3.0kW only) • Advanced 10-bit processing • Automatic shut-off and ECO mode• Dust-sealed light engine • SNMP (simple network management protocol) • DHCP (dynamic host configuration protocol) • Liquid cooling ( 2.0kW, 2.4kW, 3.0kW models only)• Setup lights (2.0kW, 2.4kW, 3.0kW models only) • Hybrid stack • Compatability with legacy accessoriesoperating voltage • 100-240 VAC @ 50/60Hz • 200-240 VAC @ 50/60Hzmaximum operating current • 12A @ 100-120V • 8A @ 200-240V • 20A @ 200V • 14A @ 200V • 16A @ 200V • 20A @ 200Vpower • 1600W • 4000W • 2800W • 3200W • 4000Wdissipation • 5460 BTU/hr • 13,650 BTU/hr • 9560 BTU/hr • 10,925 BTU/hr • 13,650 BTU/hrDimensions size • (LxWxH): 22.3 x 26.0 x 12.9" (566 x 660 x 328mm) • (LxWxH): 32.0 x 24.5 x 16.5" (815 x 621 x 419mm)shipping size • (LxWxH): 33.5 x 30.0 x 26.0" (851 x 762 x 660mm) • (LxWxH): 41.0 x 32.5 x 29.5" (1041 x 825 x 749mm)weight • 88lbs (40kg) (without lens) • 160lbs (72.5kg) (without lens)shipping weight • 125lbs (57kg) • 200lbs (91kg)Operating environment• Temperature: 40-104°F (5-40°C) • Humidity: 20-80% non-condensingRegulatory approvals • Regulatory Approvals/Markings: Directives (EC) 2011/65/EU (RoHS); 2012/19/EU (WEEE); Regulation (EC) No. 1907/2006 (REACH) • CAN/CSA C22.2 No. 60950-1• UL 60950-1 • IEC 60950-1 • FCC, Part 15, Subpart B, Class A • EN55022/CISPR22 Class A• EN55024 / CISPR24 • Certifications marks (check with CDS for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia), KC (Korea), PSE (Japan),C-Tick (Australia & New Zealand), South AfricaLimited warranty• Three years parts and labor (including light engine)1 Factory installed at time of purchase.2 Does not apply to Mirage WU7K-J.3 Only applies to Mirage WU7K-J.4 Dimensions A, B and C are based on the lens being used.17

296.9 [11.7]CENTER OF GRAVITY(WITHOUT LENS)524.3 [20.6][11.6]Mirage WU14K-J• 12,000 ANSI lumens(13,200 center lumens)137.5 [5.4]63.6 [2.5]• 3-chip 0.96" DMD• WUXGA (1920 x 1200)• 2.0kW Xenon5 [19.2] bubble lamp module32.5 [1.3]• 1000 hrsMirage WU20K-J 555.7 [21.9]RIGGING POINTS677.5 [26.7]• 18,000 4X M12 ANSI X 1.75 lumens(20,000 center lumens)140.0 [5.5]CENTER OF GRAVITY(WITHOUT LENS)• 3.0kW Xenonbubble lamp module• 750 hrs809.5 [31.9]66.0 [2.6]DIMENSION 'C'Front viewSTACKING POINTS (3X)430.0 [16.9]384.0 [15.1]DIMENSION 'A'524.3 [20.6]DIMENSION 'B' 510.3 [20.1]RIGGING POINTS677.5 [26.7]8X M12 X 1.75612.5 [24.1]25.4 [1.0] 2X 78.0 [3.1] 41.0 [1.6]STACKING POINTS (3X)Side view RIGGING 4 POINTS4X M12 X 1.75621.4 [24.5]120.7 [4.8]61.9 [2.4]408.4 [16.1]CENTER OF GRAVITY(WITHOUT LENS)87.4 [3.4]225.7 [8.9]555.7 [21.9]677.5 [26.7]87.4 [3.4]137.5 [5.4]294.4 296.9 [11.7]192.5 [11.6] [7.6]63.6 [2.5]CENTER OF GRAVITY(WITHOUT LENS)165.9 [6.5]16.7 [.7]486.5 [19.2]294.4 [11.6]32.5 [1.3]137.5 [5.4]63.6 [2.5]Top view510.3 [20.1]STACKING POINTS (3X)524.3 [20.6]RIGGING POINTS4X M12 X 1.75510.3 [20.1]140.0 [5.5]CENTER RIGGING OF GRAVITY POINTS(WITHOUT 4X M12 LENS) X 1.75Underneath view408.4 [16.1]CENTER OF GRAVITY(WITHOUT LENS)555.7 [21.9]677.5 [26.7]809.5 [31.9]555.7 [21.9]677.5 [26.7]66.0 [2.6]DIMENSION 'C'809.5 [31.9]16.7 [.7]296.9 [11.7]CENTER OF GRAVITY(WITHOUT LENS)16.7 [.7]DIMENSION 'A'DIMENSION 'B'technical specifications430.0 [16.9]384.0 [15.1510.0 [20.1]490.0 [19.3] 87.4 [3.4]416.1[16.4]120.7 [4.8]225.7 [8.9]• ±112% Vertical • ±54% Horizontal• (* ±22%V ±6%H) • (** ±82%V ±38%H) SAFETY POINTS (2X)294.4 [11.6]4X 46.0 [1.8]564.5 [22.2]486.5 [19.2]137.5 [5.4]63.6 485.0 [2.5] [19.1]32.5 [1.3]140.0 [5.5]CENTER OF GRAVITY(WITHOUT LENS)120.7 [4.8]809.5 [31.9]225.7 [8.9]66.0 [2.6]DIMENSION 'C'486.5 [19.2]DIMENSION 'A'DIMENSION 'B'RIGGING POINTS677.5 [26.7]8X M12 X 1.75612.5 [24.1]25.4 [1.0] 2X 78.0 [3.1] 41.0 [1.6]STACKING POINTS (3X)140.0 [5.5]CENTER OF GRAVITY(WITHOUT LENS)430.0 [16.9]384.0 [15.1] 510.0 [20.1]32.5 [1.3]490.0 [19.3]677.5 [26.7]RIGGING POINTS8X M12 X 1.75612.5 [24.1]621.4 [24.5]430.0 [16.9]25.4 [1.0] 2X 78.0 [3.1] 41.0 [1.6]STACKING POINTS (3X)384.0 [15.1]416.1[16.4]66.0 [2.6]192.5 DIMENSION [7.6] 'C'DIMENSION 'A'DIMENSION 'B'485.0 [19.1]RIGGING 61.9 [2.4] POINTS677.5 165.9 [26.7] [6.5]8X M12 X 1.75612.5 [24.1]25.4 [1.0] 2X 78.0 [3.1]4X 41.046.0 [1.6][1.8]STACKING POINTS (3X)SAFETY POINTS (2X)564.5 [22.2]510.0 [20.1]490.0 [19.3]416.1[16.4]485.0 [19.1]• 14A @ 200V• 2800W• 9560 BTU/hr• 20A @ 200V• 4000W• 13,650 BTU/hr510.0 [20.1]490.0 [19.3]416.1[16.4]485.0 [19.1]SAFETY POINTS (2X)4X 46.0 [1.8]564.5 [22.2]SAFETY POINTS (2X)4X 46.0 [1.8]564.5 [22.2]18

Corporate officesWorldwide officesChristie Digital Systems USA, Inc.USA – Cypressph: 714 236 8610Christie Digital Systems Canada Inc.Canada – Kitchenerph: 519 744 8005Australiaph: +61 (0) 7 3624 4888Brazilph: +55 (11) 2548 4753China (Beijing)ph: +86 10 6561 0240Franceph: +33 (0) 1 41 21 44 04Germanyph: +49 2161 664540Indiaph: +91 (080) 6708 9999Republic of South Africaph: +27 (0)11 510 0094Singaporeph: +65 6877 8737Spainph: +34 91 633 9990Independent salesconsultant officesChina (Shanghai)ph: +86 21 6278 7708Japan (Tokyo)ph: 81 3 3599 7481United Arab Emiratesph: +971 4 3206688Italyph: +39 (0) 2 9902 1161Eastern Europe andRussian Federationph: +36 (0) 1 47 48 100Korea (Seoul)ph: +82 2 702 1601United Kingdomph: +44 (0) 118 977 8000For the most current specification information, please visit www.christiedigital.comCopyright 2013 Christie Digital Systems USA, Inc. All rights reserved. All brand names and product names are trademarks, registered trademarksor tradenames of their respective holders. Christie Digital Systems Canada Inc.’s management system is registered to ISO 9001 and ISO 14001.Performance specifications are typical. Due to constant research, specifications are subject to change without notice.Printed in Canada on recycled paper. 3674 Oct 13