ELFOSPACEBOX 2 7-41 - BTK

More documents

Recommendations

Info

BT07C006GB-01(EC1)TERMINALS7 - 41(MAUXX)AUXILIARY AIR OUTLET FITTINGTwo air outlets are provided on the side of the unit for connection to separate supply air outlets.They can be used to supply air from the fan coil unit to distant areas of a room or even to a different room.The total air flow does not change. The air flow at high speed depending on the air duct pressure drop is shown in the tables below.Note: all air ducts must be insulated in order to avoid condensation.N. 1 used outletsdP = pressure dropQ = water flowN. 2 used outletsdP = pressure dropQ = water flowThis is used to introduce primary air into the environment directly throughthe diffuser. The kit includes a flow separator to be fitted inside thecassette, and a circular fitting for connection to the flexible system ducting.The flow of air is sent directly to just one of the outlet louvers, withoutpassing through the coil. The air flow of fresh air introduced into theenvironment depend on the inlet static pressure.7-11-15 21-31-41Ø 150 mmØ 180 mmQ m³/h Pa Q m³/h Pa80 3 160 3120 8 200 8160 15 300 15200 25 400 25240 36 500 3612
BT07C006GB-01(EC1)TERMINALS7 - 41(2V2X)2-WAY ON/OFF VALVE 2-PIPE SYSTEM(3V2X)3-WAY ON/OFF VALVE 2-PIPE SYSTEM(2V4X)2-WAY ON/OFF VALVE 4-PIPE SYSTEM(3V4X)3-WAY ON/OFF VALVE 4-PIPE SYSTEMRated pressure:16 barMax. ambient temperature:50 °CMax. water flow temperature:110 °CPower:230 V - 50/60 HzRate:3 VAProtection:IP 43Travel time:ca. 3 min.Max. glycol content of water:50%Valve set, 2 or 3 ways, ON-OFF, with thermoelectric actuator.The set includes connection pipes and holders.Note: The main battery valve connection is 1/2” for 7-11-15 sizesand 3/4” for 21-31-41sizes,the auxiliary battery valve connection is 1/2”.Note: The maximum pressure drop accrossthe fully open valve should not exceed 25 kPafor cooling operation and 15 kPa for heating operation.Pressure dropCC2 - 2- PIPE SYSTEM COILCC4 - 4- PIPE SYSTEM COILA - MAIN COIL (COOLING)B - AUXILIARY COIL (HEATING)* - EXTERNAL THREAD** - MAX DIFFERENCE OF PRESSURE AT CLOSED VALVEDP = PRESSURE DROPQ = WATER FLOW13
Page 1: BT07C006GB-01(EC1)REPLACE: BT07C006
Page 6 and 7: BT07C006GB-01(EC1)TERMINALS7 - 41AI
Page 8 and 9: BT07C006GB-01(EC1)TERMINALS7 - 412
Page 11: BT07C006GB-01(EC1)TERMINALS7 - 41PR
Page 15 and 16: BT07C006GB-01(EC1)ACCESSORIESTERMIN
Page 17 and 18: BT07C006GB-01(EC1)16035467057259757
Page 19 and 20: BT07C006GB-01(EC1)15 mmATERMINALS7

ELFOSPACEBOX 2 7-41 - BTK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?