938G IT38G Waste Handlers -AEHQ5382-01 - Kelly Tractor

938GIT38GWaste Handlers®SupplementNote: For standard specifications andfeatures, refer to the standard Caterpillar ®specalog for this machine. Featuredmachines may include additionalequipment (which may change) applicableonly for special applications. See yourCaterpillar dealer for available options.Cat ® 3126 DITA Diesel EngineFlywheel Power 119 kW 160 hpMaximum Flywheel Power 128 kW 172 hpBucket Capacity 4.21 m 3 5.5 yd 3Operating Weight 14 096 kg 31, 077 lb

Guarding and Modifications - Aurora ConfigurationThe 938G and IT38G Waste Handler Arrangements provide the features and protectionneeded for demanding waste handling applications.The Caterpillar 938G and IT38G Waste Handlers are ex-factoryarrangements developed specifically for use in waste transferstations, recycling centers, and waste-to-energy plants. Thesearrangements provide features which protect machinecomponents, reduce debris entry, and allow fast and easycleaning.The 938G and IT38G Waste Handlers combine the best ofpreviously designed Caterpillar waste handling features withthe improved productivity, serviceability, and operatorcomfort of G-Series wheel loaders. These waste handlers canbe equipped with a 4.21 m 3 (5.5 yd 3 ) refuse bucket availablefrom Caterpillar Work Tools and Services.11 Drive Shaft Guard extends from the support bearing to thefront axle to prevent debris from wrapping around the driveshaft and universal joints.2 Axle Seal Guards protect axle seals of each wheel frommaterial which could wrap around the axle and damage theseal.3 Crankcase Guard protects the engine crankcase between thecounterweight and rear axle. The guard is hinged and canbe powered with the optional Electrical Actuator for easycleaning and maintenance.4 Hitch Area Guards provide protection for the hydraulic linesin the hitch area by enclosing the frame. This also reducesdebris entry into the transmission and engine compartments.5 Transmission Oil Fill/Check Dipstick is protected by alockable guard enclosure.24354

76896 Power Train Guard protects the engine and transmissionbetween the rear axle and hitch area. This guard is hingedand can be powered by the optional Electrical Actuator foreasy cleaning and maintenance.7 Trash Radiator provides six fin per inch engine coolant andoil cooler cores. Both the oil and air conditioner condenserare hinged for easy cleaning.8 Exhaust Insulation insulates the muffler, exhaust manifold,tubing, and turbo from burnable debris which may enter theengine compartment.9 Front Light Guards protect the headlights from debris thatmight damage or break lenses.NOTE: Transmission Dipstick replaces the transmission oillevel sight gauge.3

Additional OptionsChoosing the proper options can increase versatility, durability, productivity, and ease ofmaintenance.High Lift Arrangement providesadditional dump clearance, reach, andoverall length for application versatility.Payload Control System can help theoperator monitor the weight of materialplaced into trucks, trailers, etc.Traction Aids such as the TractionControl System offers enhanced tractionin poor underfoot conditions.Auto-reversing fan changes direction ofairflow automatically to purge debrisfrom the radiator cores and screens.Air Conditioning offers additionalcomfort and enhanced cab air qualityfor increased operator efficiency.Application Specific Tires - MichelinXMineD2 tires are L-5 grade andrecommended for paved surfaces.Electrical Actuator provides forpowered raising and lowering of thecrankcase and powertrain guards.Other optionsNarrow FendersAir Suspension SeatsSingle Lever Bucket ControlsRide ControlThird ValveStarting AidsCab LightsExternal MirrorsTurbine Pre-cleanerHeavy Duty AlternatorDirectional LightsOperation SpecificationsMachineBucketConfigurationRated bucket sizeDump clearance at full liftand 45° dischargeReach at full liftand 45° dischargeReach with lift armshorizontal and bucket levelDigging depthOverall lengthOverall height with bucketat full raiseLoader clearance circle withbucket in carry positionStatic tipping load straightStatic tipping loadat 40° turn (FTSTL)Operating weightBreakout forcem 3yd 3mmft/inmmft/inmmft/inmminmmft/inmmft/inmmft/inkglbkglbkglbkNlb938GIT38G159-3205 106-9483Change forStandard High Lift High Lift Standard4.2 4.24.01—5.5 5.5 5.252523 2936 413 25888'3" 9'7" 16" 8'6"1228 1320 92 14154'0" 4'4" 4" 4'8"2658 3048 390 28208'8" 10'0" 16" 9'3"50 106 56 702" 4" 2" 3"7660 8130 470 778525'2" 26'8" 1'6" 25'7"5555 6055 500 565018'3" 19'10" 1'7" 18'6"12 065 12 430 365 12 37539'7" 40'9" 1'2" 40'7"12 153 9908 –2245 786826,736 21,798 –4938 17,31010 390 8396 –1995 668222,859 18,470 –4389 14,73114 325 14 717 392 13 34031,515 32,377 862 29,41085.42 81.78 –3.64 95.1719,156 18,340 –816 21,342NOTE: Dimensions listed are for machines equipped with 20.5 R25 XTLA 1 ★ (L-2) tires. Operation specifications are for astandard machine with Waste Bucket. Operation specifications will vary as optional guarding is added to the machine.4

Guarding and Modifications - Gosselies ConfigurationThese guards and modifications are in addition to those found in the Aurora Configuration.*This arrangement is available for the 938G only. Contact your local dealer for details.213 41 Airborne Debris Cooling System draws clean air from therear of the machine to reduce airflow restriction. Atemperature sensing on-demand fan lowers average fanspeeds for increased available horsepower and reducedplugging potential. In addition, a rear grill with4 mm (.16 in) holes reduces debris entry into the coolingsystem.2 Swinging Cooler Cores. The oil cooler and optional airconditioner cores are hinged and fold down for easieraccess, cleaning, and maintenance. The engine coolant andswinging oil cooler and air conditioner cores contain widerspaces to allow smaller debris to more easily pass through.3 Engine Service Wall separates the engine and radiator areasto prevent debris from entering engine compartment. Thiswall contains many service points that are accessiblethrough the side service door.4 Rubber Baffle Guard encloses the front frame area to reducedebris entry and protect lift arm and tilt cylinder hydrauliclines.Tilt Cylinder Guard protects the tilt cylinder from material thatmay damage the cylinder during refuse handling applications.Front Frame Guard protects the hydraulic lines under the frontloader frame from debris that may puncture or damage fronthydraulic lines.Transmission Sight Gauge Guard protects the transmission oillevel sight gauge from potential damage.Airborne Debris Air Conditioner is optional and contains sixfins per inch cooler cores for applications with high potentialfor plugging from airborne debris.* NOTE: Gosselies arrangement does not contain the transmission dipstick found in the Aurora arrangement. In addition,exhaust insulation is offered as an attachment.Guards and modifications are not interchangeable between arrangements. Options may vary.Specifications may vary with arrangement and standard machine configuration.5

938G/IT38G Waste HandlersAEHQ5382-01 (09-01)Replaces AEHQ5382www. CAT.com© 1999, 2001 CaterpillarPrinted in U.S.A.Featured machines may include additional equipment only for special applications.See your Caterpillar dealer for available options.Materials and specifications are subject to change without notice.®