Electronic Pressure Switch EDS 8000 - HYDAC USA
Electronic Pressure Switch EDS 8000 - HYDAC USA
Electronic Pressure Switch EDS 8000 - HYDAC USA
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User manual <strong>EDS</strong> <strong>8000</strong> US Page 118 Error messageIf an error is detected, a corresponding error message appears that must beacknowledged by pressing any key.Possible error messages:E.10 A data error was detected in the saved settings. This could be due to strongelectromagnetic interference or a component fault.Action: Press E and confirm "RES" by pressing "Yes". The factory settings will berestored for all adjustable parameters and all minimum and maximum valueswill be deleted. Enter the data again from the beginning.E.12 An error was detected in the saved calibration data. This could be due tostrong electromagnetic interference or a component fault.Action:Disconnect then reconnect the supply voltage to the instrument. If the errorpersists, the instrument must be returned to the factory for recalibration orrepair.E.21 A communication error was detected within the instrument. This could be dueto strong electromagnetic interference or a component fault.Solution: Press E . If the error persists, disconnect then reconnect the supply voltageto the instrument. If the error still persists, please contact our servicedepartment.9 Pin assignmentVersion with 2 switch outputs:Male 4 pole, M12x1250 mA<strong>EDS</strong> 8446-2 84x6-2250 mAStatus 09.09.2009 <strong>HYDAC</strong> ELECTRONIC GMBH Part No. 669820
Change language