KERN CXB Version 1.3 - FineMech
KERN CXB Version 1.3 - FineMech
KERN CXB Version 1.3 - FineMech
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
8 Service mode access♦ Access to the service mode is controlled by jumper SWA1 on the main PCB. Thejumper has two positions LOCK, which prevents access to the service mode andADJ, which allows access to the calibration and configuration routines.♦ SWA 1 jumper is located adjacent to the RF screening cover of the main PCB.♦ Place your balance upside down and remove seal/cap. For calibration andconfiguration routines the jumper “SWA1” must be set to position “ADJ”.Sealing mark / unlocking switchPosition of unlocking switchTo the rightTo the leftStatusUnlock the balance for calibration process (ADJ)Verification position - calibration locked (LOCK)<strong>CXB</strong>-SH-e-0913 11
Change language