KERN CXB Version 1.3 - FineMech

More documents

Recommendations

Info

11.3 Low temperature calibration⇒ scales must be in the control room of low temperature Press key+ 1 key+ 5 key, then press key to enter the temperaturecalibration modeWeight Piece Weight Pcs0. 0 0 0 XX XXXXXXlow temperature(°C)zero internal valueNo weight on the platter, press . key to calibrate zeroWeight Piece Weight Pcs3 0. 0 0 0 XX XXXXXXfull capacity value low temperature(°C) internal value of full capacityPut the full capacity weight on the platter, press . key to calibrate full capacityvalue.After scale is stable, it will reset back to zero automatically (remove the weightmass from the platter before it resets back to zero), then the proceduresfinished. Put the weight mass on the platter again to check if the displayshowing the accurate weight. If it’s correct, turn off the power, then re-adjustthe mini jumper SWA1 to “LOCK” position.11.4 Check / Delete temperature calibration data Presskey+ 1 key+ 5 keyWeight Piece Weight PcsSho t 0 0 XXXXXXshow temperature temperature (°C) internal value Press 2 or 8 key to check the temperature calibration data. Press 2 or 8 key to select the desirable data, and double-press . key todelete it.20 CXB-SH-e-0913
12 Spare partsCXB-SH-e-0913 21
Page 7 and 8: 5.1 Symbol indicator “3”Display
Page 9 and 10: 7 External calibration7.1 Calibrati
Page 11 and 12: 8 Service mode access♦ Access to
Page 13 and 14: Put the 1 st weight mass (e.g. weig
Page 15 and 16: 10 Spec. calibration♦ Before cali
Page 17 and 18: 10.1 Reference values for capacity
Page 19: 11.2 High temperature calibration
Page 23: 43 Upper housing 144 Lower housing

KERN CXB Version 1.3 - FineMech

Create successful ePaper yourself

Delete template?

Save as template?