C - DTU Nanotech - Danmarks Tekniske Universitet
C - DTU Nanotech - Danmarks Tekniske Universitet
C - DTU Nanotech - Danmarks Tekniske Universitet
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
I<br />
II<br />
III<br />
IV<br />
V<br />
VI<br />
6.1 Materials and Methods 49<br />
Figure 6.6: First reactor chamber setup: PMMA plates I–III built the reactor vessel, II and<br />
III had a channel with PVC–tube interconnection for sampling. A temperature<br />
sensor (not shown) was bonded in between III and the PMMA foil IV. Beneath<br />
IV was the heat foil (V) and the final reactor chamber bottom (VI) with cut offs<br />
for the heat foil and the electric wires (not shown)
Change language