slimsert - Electronic Fasteners Inc

Page 3 LN 29 534Installation of the thread insert:thread insert is wrenched into the parent material to depth shown in Fig. 3.Fig. 3Thread insertwrenched inFollowing this operation a swage tool (see Fig. 4 and Table 3) is used to swage the collar of the insert out until the knurl presses into thebroachedserration of the counterbore d 3(see Fig. 5). The threaded insert is installed when the shoulder of the swage tool bottoms on the surface of theparent material.Fig. 4InstallationtoolTable 3Installation Toold 6d 7l 1l 2≈ThreadinsertFig. 52 113 5.6 M32.7114 7.1 M43.8115 8.5 M54.6126 9.9 M65.6147 11.3 M76.3148 12.8 M86.3148 12.8 M8X17.8161015.7 M107.8161015.7 M10X1.259.8181217.7 M12x1. 59.8181217.7 M12X1.2511.8201419.7 M14X1. 5Thread insertinstalledThreaded inserts, locked and self-locking, for temperatures up to 650°C per LN29534 sheet 1.Information about tools specified in this standard can be obatined from NormenstelleLuftfahrt.336