slimsert - Electronic Fasteners Inc

Page 2 LN 29 540 Sheet 2INSTALLATION OF THE THREADED INSERT:thread insert is wrenched into the parent material to depth shown in Fig. 2.FIG. 2THREADED INSERTWRENCHED INFollowing this operation a swage tool (see Fig. 3 and Table 2) is used to swage the collar of the insert out until it presses into the wall of thecounterbore d 3(see Fig. 4). The threaded insert is installed when the shoulder of the swage tool bottoms on the surface of the parent material.Table 2Size ofInstallation Toold 4d 5l 1l 2≈Size ofThreadedinsert2 113 5.6 M32.7114 7.1 M43.8115 8.5 M54.6126 9.9 M65.6147 11.3 M76.3148 12.8 M86.3148 12.8 M8X17.8161015.7 M107.8161015.7 M10X1.259.8181217.7 M12x1. 59.8181217.7 M12X1.2511.8201419.7 M14X1. 5Threaded inserts, locked and self-locking, for temperatures up to260°C per LN 29540 sheet 1.Information about tools contained in this standard can be obatinedfrom Normenstelle Luftfahrt.340