NEW 2010 Circular Interconnects Catalog - All sections - 12-C3

Options High SpeedEMI Filter Printed5015 83723 III 26482 38999OthersFiber OpticsTransient Circuit Board26500 Pyle Crimp RearContacts Release Matrix Matrix Pyle Matrix 2 SJT I II IIIAmphenolAerospaceThe Hermetic Filter ConnectorEMI/Transient ProtectionSpecialsWhile only approximately 1/2 inch longer than standard series con nectors, the hermeticfilter connector provides all the benefits of a her metic connector, as well as EMIprotection for sensitive circuits. The filter assembly is protected by a fused glass insertwithin a unique steel housing. This design accounts for the connector’s capability intolerating high level static pressure, whilemaintaining a low level leakage rate.Applications include pressurized testequipment, environmental and toxic gaschambers, and moisture sealing onindustrial equipment and missiles.Filtered PlugThis connector is designed forapplications where EMI protection isessential, but access to the receptacleis denied. The filtered plug presents analternative for the electrical engineer.The filter plug is designed with the sameFiltered Plugcomponents as a standard filter receptacle,but offers the option of being mounted on the cable harness.This device is a cost effective method of achievingEMI protection when length restrictionsprohibit inclusion of an adapter to the system.Filter Connectors can also incorporate high frequency coax,twinax, triax, quadrax and differential twinax contacts.Amphenol MIL-DTL-38999 Series III connectors are the mostcommonly used connectors for incorporation of shieldedcontacts along with traditional crimp contacts. Highperformance shielded coaxial, twinax and triax contacts areavailable to fit various RG and special cables. They eliminatediscontinuities or impedance variations due to movement ofparts under axial load. Size 8 quadrax and differential twinaxcontacts provide high speed data transfers.Filter Connectors with Flex TerminationFlex circuits are available for MIL-DTL-38999, MIL-DTL-5015 andMIL-DTL-26482 filter connectors. They are offered in flat or sculpturedstyles and provide flexibility in assembling to printed circuit boards.Through Amphenol’s AdvancedCircuit Technology division, thesestrong and rigid, yet highly flexiblecircuits eliminate the need topurchase and attach individual pinsor connectors. Thus they promotesystem automation, reduce spacerequirements and lower installationcosts. Sculptured ® Flexible Circuitshave built-in terminations whicheliminate the failure associated withcrimped or soldered-on contacts,and geometrically fit the tight space Flex Circuitry for Attachment torequirements within a unit.Printed Circuit BoardsHermetic Filter ConnectorFilter Connectors with Coax Shielded ContactsMIL-DTL-38999 with Quadrax ContactsFor more information on these specials,consult Amphenol Aerospace and see our websiteat www.amphenol-aerospace.com.338Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com