OWNER'S MANUAL FOR EPILOG FiberMark ... - Epilog Laser

Section 1: SafetyEmergency Stop ButtonThe Emergency Stop Button is a safety feature designed to immediately stop thelaser from firing and stop the motion control system from moving should anemergency occur. By depressing the Emergency Stop button the electrical circuitsleading to the laser source and the main power supply are opened and all systemfunctions, except the cooling fans, come to an immediate stop.Emergency StopButtonIn order to restore the laser system to its standard operating mode after activatingthe Emergency Stop button, follow these instructions:1. Press the main power switch to the off position2. Reset the Emergency Stop button by twisting it in a clockwise direction tospring it back into its active position. This step is important as the lasersystem will not function if the Emergency Stop button remains in itsrecessed position.3. Power up the system using the main power switch.6