Tsubaki Guide to Forestry Products

1630 Drew Road, Mississauga, ON L5S 1J6Tel: (905) 676-0400 or 1-800-263-7088permission of Tsubaki of Canada Limited is prohibited.TRIMMER LUGWhen improvement really mattersNEWDESIGN!Trimmer LugTrimmer Lugs are used to convey sawn wood through the scanner, trimmer and several other operationsin a sawmill. Tsubaki is pleased to offer two types of Trimmer Attachment: the traditional welded type (WTL)and the new quick change style (QTL).81XPQTLA10L260PMTHow To Order:Example81XHow To Order Sell SheetDescriptionChain Size• Modular pin design for quick roller replacement.• Attachment is on a connecting link for quick change out and repair. No need to weld.• Standardize operations and reduce inventory on replacement parts.QTL Modular Pin StyleTrimmer Lug*PQTLA10LTierAttachment TypeRoller TypeAttachment SpacingBlank EconoP PremiumL LambdaQTL Quick Trimmer Lug (Modular Pin Style)WTL Welded Trimmer LugA See page 26B See page 26xxL Every xxL Link (e.g. 10L = every 10th link)Note: (1) If spacing is even, attachment is supplied on the pinlink unless otherwise instructed. If spacing is odd, attachmentalternates on the pin link and roller link. In the case of QTLattachment odd spacing will be supplied on the pin link usingan offset link.BlankSupply in 10ft strandsH 1H 2ODAll dimensions in inches unless otherwise stated.260PLengthxxPxx Pitch Strands (e.g. 260P = 260P Strand)Note: (1) Total chain length should be divisible by theattachment spacing. (2) Chain will be supplied in suitablelengths for shipping with a conn link at each section.81X 2.500 2.113 3.500*Patent pending.MTOptionMT – Matched and Tagged Stands – Recommended for all multi-strandtimed applications. E.g. Scanner, Trimmer, Drop SorterWTL Welded StyleTrimmer LugH1H2ODWelded PusherHTNRoller Style AAll dimensions in inches unless otherwise stated.Roller Style BSPACINGH 1H 2OD H 1H 2OD81X 2.75 2.50 2.75 2.50 2.25 3.50C2100H 2.75 2.50 2.75 2.50 2.25 3.50C2080H 2.75 2.50 2.75 2.50 2.25 3.50Note: Trimmer Lug will be welded on to the pin link or roller link depending on spacing requirements. Specify standard dimensions (OD or A) whenordering. Tsubaki also offers various sizes of trimmer lug weld-on attachments. Contact Tsubaki for more information.Height, HThickness, TWidth, NSpacingDimensionREMOVE ALL BURRSGENERAL TOLERANCES ( ISO 2768-1 )ALL DIMENSIONS IN INCHES UNLESS OTHERWISE NOTED( ) DENOTES REFERENCE MEASUREMENTUp To 0.236± 0.004Over 0.236 to 1.181 ± 0.008Over 1.181 to 4.724 ± 0.012Over 4.724 to 15.748 ± 0.020DescriptionBREAK ALL SHARP CORNERSCOMPONENT QTY TOTAL QTY BILL OF MATERIALS3RD ANGLE PROJECTION DRAWN BYThis chain is manufactured toDESCRIPTION MATERIAL QTYKevin Breadnerconform with ANSI specifications. - - -Tsubaki does not warrant fit forTotal height from toppurposeofaschainfailure analysisto bottom --hasof attachment- -04/15/09not been performed for specific - - - -Over 15.748 to 39.370 ± 0.031DO NOT SCALE DRAWING APPROVED PART NUMBER:applications or intended use.Over 39.370 to 78.740 ± 0.047- - - -SCALE:-ThicknessOver 78.740 to 157.480of ± 0.079 attachment- - - -FREEDESCRIPTION:Angular Dimension Tol. ± 1°---SHEET: 1 of 1SIZE: B -Attachment widthAttachment spacing: May be supplied in number of pitches or links or as dimension shown above.TSUBAKI OF CANADA LIMITEDPROPRIETARY AND CONFIDENTIALThe information contained in this drawing is the soleproperty of Tsubaki of Canada Limited. Anyreproduction in part or as a whole without writtenDRAWINGNUMBERREV 0Printed: 4/12/201126 27