Tsubaki Guide to Forestry Products

STANDARD ATTACHMENT CHAINORDERING ATTACHMENTCHAIN IS EASY!When value really mattersDouble PitchStandard Attachment ChainTo order attachment chain,please provide the following:SA-1 AttachmentφO1NSA-2 AttachmentφONKT1) Size of chain (40, 50, C2062H)2) MaterialC1XSC2XS3) Rivet or Cotter Pin construction4) Type of attachmentPPPP5) Spacing of attachment2L2L4L2L2LSK-1 AttachmentφO1NC1XSSK-2 AttachmentφONKC2XSTAttachment spacing is counted as being the number oflinks (both inside and outside) up to and including thenext attachment. In the non-standard spacing exampleto the right, initial spacing is every 2nd (2L) and thenevery 4th (4L). Each repeating section is 8 pitches (8L).8LA12L2L4L REPEATAll standard attachment chain orders are to be confi rmedwith a schematic for the customer’s review.PPPP6) Overall length of chainAll dimensions in inches unless otherwise stated.SA-1, SA-2, SK-1 and SK-2 Attachment Dimensions Additional Wt. per Attach. (lbs.)hainmberSAS 1 2 K 1AttachmentSKAttachment2 . . . . . 2 .1 2 .2 . . . 12 . . . 2 . . .2 .2 . . 1 . 22 1.2 . . . 1.12 .2 . .12 . .2 1. . 1. . 2 1. .2 . .1 . .1 121 1. 1.12 1.2 . 1. . 2 . .1 .1 2 .2212 2. 1 1. 12 1. 1.12 2.2 . . .21 .221 . 121 . 1. 2. 1. . . 1 . 1 .2 1 . .D-1 Attachment D-3 AttachmentL4L2L3TφDPPφRHTWL4L2L3TφDPPφRHTWASME (ANSI) Special AttachmentsIn addition to providing standard attachment chain, Tsubaki of Canadacan modify existing attachments to match your requirements.An example of this could be a shorter-than-standard pin or a largerhole diameter. If modifying standard attachments, delivery can be1-2 weeks depending on the quantity.When specifying non-standard attachments,information required is:• tab length, width and possibly height• hole diameter and type of hole (threaded, countersunk)• pin diameter, projection (extension) length, type of end(threaded, circlip groove)ATT LENGTHHOLEATT WIDTHAll non-standard attachment quotes will be accompaniedby a drawing for customer approval.PIN PROJ.PINATT HEIGHTAll dimensions in inches unless otherwise stated.Chain NumberD Attachment DimensionsAdditional Wt. per Attach. (lbs.)D L 3 L 4 D-1 Attachment D-3 AttachmentC2040 0.156 0.374 0.663 0.002 0.004C2050 0.200 0.469 0.833 0.004 0.008C2060H 0.234 0.563 1.083 0.007 0.014C2080H 0.312 0.752 1.401 0.015 0.030C2100H 0.375 0.937 1.687 0.026 0.052C2120H 0.437 1.125 2.062 0.044 0.088C2160H 0.562 1.500 2.718 0.099 0.198IF YOU DON’T SEE WHAT YOU ARELOOKING FOR – ASK TSUBAKI!32 33