DMX and DMH

Selection of pumpDMX and DMHMax.capacityandpressure[l/h] - [bar]DMX model 226, DN 32249-3525-3765-3*Control variantB = No controlsAR =BARAT3AT5AT6AT7Etron Profi(analog/pulse control)AT3= Servomotor1 x 230 V,50/60 Hz,4-20 mAAT5= Servomotor1 x 115 V,50/60 Hz,4-20 mAAT6= Servomotor1 x 230 V,50/60 Hz,4-20 mA,EEx d II BT 4AT7= Servomotor1 x 115 V,50/60 Hz,4-20 mA,EEx d II BT 4[l/h] - [bar] Control variantMaterials of dosing head,gaskets and valve ballsDosing head version:PP = PolypropylenePV = PVDF (polyvinylidenefluoride)PVC= Polyvinyl chlorideSS = Stainless steel, DIN 1.4401PV-R, PVC-R= Integrated relief valvePP-L, PV-L. PVC-L, SS-L= Integrated diaphragmleakage detectionPV-RL, PVC-RL= Integrated relief valve anddiaphragm leakage detectionGasket material:E = EPDM (ethylene propylenediene monomer)V = FKM (fluorocarbon)T = PTFE (polytetrafluoroethylene (Teflon®))Valve ball material:C = CeramicG = GlassT = PTFE (polytetrafluoroethylene (Teflon®))SS = Stainless steel, DIN 1.4401Materials of dosing head,gaskets and valve ballsPP/E/TPP/V/GPV/T/TPVC/E/SSPVC/V/GSS/E/SSSS/T/SSSS/V/SSControlpanelpositionXFWXFWMotorvoltage0GHEF0GHEFValvetypeControl panel positionX = No panelF = Front-mountedW = Wall-mountedMotor voltage0 = Without motor,IEC flangeG = 1 x 230 V, 50/60 HzH = 1 x 120 V, 50/60 HzE = 230/400V 50/60 Hz440/480V 60 HzF = Without motor,Nema flange (US)Valve type1 = Standard3 = Spring-loaded,0.05 bar suction,0.8 bar discharge4 = Spring-loaded,discharge side onlyControlpanelpositionMotorvoltageValvetype134134Connection,suction/discharge4 = Tube 6/9 mm6 = Tube 9/12 mmB9 = Tube, PVC, 19/27 mmQ = Tube 19/27 and 25/34 mmS = Tube 0.375" / 0.5”A = Threaded Rp ¼"A1 = Threaded Rp ¾"A2 = Threaded Rp 1 ¼"V = Threaded NPT ¼"A9 = Threaded NPT ½"maleA3 = Threaded NPT ¾"A7 = Threaded NPT ¾"maleA4 = Threaded NPT 1 ¼"A8 = Threaded NPT 1 ¼"maleK = Cementing d. 40 mmB1 = Tube 6/12 mm/cementing d. 12 mmB2 = Tube 13/20 mm /cementing d. 25 mmB3 = Welding d. 16 mmB4 = Welding d. 25 mmB5 = Welding d. 40 mmConnection,suction / dischargeA8B5KA2A4MainsplugBEFIXBEFIXMotorvariantMains plugF = EU (Schuko)B = USA and CAN,120 VI = AUE = CHX = No plugMotor variantE0 = PTC forfrequencycontrolE1 = EEx e II T3E2 = EEx de CT 4MainsplugMotorvariantE0E1E2E0E1E2* Not available with single phased motor and therefore not with control variant AR.Note:Mains plug only for single phase.DMX model 226 is available with two dosing heads.Type key example: DMX 67-10\67-10 AR-PP-L/V/G-F-G1VVF.Not available with single phased motor.51