DMX and DMH

Pumped liquidsDMX and DMHList of pumped liquidsThis resistance table is intended to serve as a generalguide only for material resistance (at room temperature)and is not a substitute for actual testing of thechemicals and pump materials under specific workingconditions.The data shown is based upon information from varioussources available, but be aware that many factors, suchas purity, temperature, abrasive particles, etc. canaffect the chemical resistance of a given material.Note: Some of the liquids in this table may be toxic, corrosiveor hazardous.Note: Be careful when handling these liquids.DesignationAcetic acidPumped liquid (20°C)Chemical formulaCH 3 COOHConcentration %PPMaterialsPump housing Gasket BallPVDFStainless steel,DIN 1.4401PVCFKM25 • • • • – • • • • •60 • • • • – • • •85 • • • – – – • • •Chromic acid 3 H 2 CrO 4Nitric acid HNO 3Aluminium chloride AlCl 3 40 • • – • • • • • • •Aluminium sulphate Al 2 (SO 4 ) 3 60 • • • • • • • • • –Ammonia, aqueous NH 4 OH 28 • • • • – • • • –Calcium hydroxide 5 Ca(OH) 2 • • • • • • • • • •Calcium hypochlorite Ca(OCl) 2 20 • – • • • • • • •30 – • – • • • • •40 – • – • • – • • •10 • • • • • • • • • •50 – • – • • – • • •Copper sulphate CuSO 4 30 • • • • • • • • • •Ferric chloride 1 FeCl 3 100 • • – • • • • • • •Ferric sulphate 1 Fe 2 (SO 4 ) 3 100 • • • • • • • • • •Ferrous chloride FeCl 2 100 • • – • • • • • • •Ferrous sulphate FeSO 4 50 • • • • • • • • • •Hydrochloric acidHCl