IT38G Integrated Toolcarrier - AEHQ5220-03 - Kelly Tractor

Operating SpecificationsGeneral purposebucketRated bucket capacity (§) m 3yd 32.5 2.4 2.23.3 3.1 2.9Bolt-onBolt-on Bolt-onBolt-onedgesedgesteethteethStruck capacity (§) m 3yd 3Width (§)mmft/inDump clearance at fullmmlift and 45° discharge** ft/inReach at full liftmmand 45° discharge**ft/inReach at 45° discharge and mm2130 mm (7 ft 0 in) clearance ft/inReach with lift armsmmhorizontal and bucket level ft/inDigging depth (§)mminOverall length**mmft/inOverall height with bucket mmat full raise (§)ft/inLoader clearance circle with mmbucket in carry position (§) ft/inStatic tipping load straight* (§) kglbStatic tipping loadkgfull 40° turn* (§)lbBreakout force*** (§)kglbOperating weight* (§)kglb2.1 1.9 2.0 1.82.7 2.5 2.6 2.42710 2710 2735 27358' 11" 8' 11" 9' 0" 9' 0"2800 2800 2720 27209' 2" 9' 2" 8' 11" 8' 11"1200 1200 1290 12903' 11" 3' 11" 4' 3" 4' 3"1655 1655 1705 17055' 5" 5' 5" 5' 7" 5' 7"2520 2520 2640 26408' 3" 8' 3" 8' 8" 8' 8"70 70 45 452.8 2.8 1.8 1.87485 7485 7600 760024' 7" 24' 7" 24' 11" 24' 11"5235 5120 5235 512017' 2" 16' 10" 17' 2" 16' 10"12 135 12 135 12 225 12 22539' 10" 39' 10" 40' 1" 40' 1"8861 8859 9059 911019,535 19,530 19,970 20,0807621 7630 7806 786016,800 16,820 17,210 17,33012 650 12 692 12 738 12 78227,890 27,980 28,080 28,18013 062 12 984 12 967 12 89928,800 28,630 28,590 28,440BucketSizeyd 3 m 32.75 2.13.00 2.33.25 2.5kg/m 3lb /yd 3Bucket Selection Guide1400 1600 1800 20002400 2600 2800 3000 3200Material DensityUnder utilizedOptimumMaximum loadSpecifications and ratings conform to all applicable standardsrecommended by the Society of Automotive Engineers. SAEStandards J732c govern loader ratings and are denoted in the textby (§).* Static tipping load and operating weight shown are based onstandard machine configuration with sound-suppression cab andROPS, 20.5 R25 XTLA (L-2) tires, full fuel tank, coolant, lubricantsand operator.** Dump clearance, reach and overall length dimensions for bucketequipped with teeth reflect actual dimensions. SAE J732C allowsdimensions for bucket with teeth to reflect the dimension using thecutting edge. Caterpillar Inc. uses actual equipped bucketdimensions.*** Measured 102 mm (4.0"): behind tip of cutting edge with buckethinge pin as pivot point in accordance with SAE J732C.**** All buckets shown can be used on the high lift arrangement. Highlift column shows changes in specifications from standard lift tohigh lift. Add or subtract as indicated to or from specifications givenfor appropriate bucket to calculate high lift specifications.IT38G Integrated Toolcarrier specifications21