Expert R/AFN Retrograde /Antegrade Femoral Nail. - Osteosyntese

5Measure for length of locking screwInstrument03.010.072 Depth Gauge for Locking Screws,measuring range up to 110 mm,for No. 03.010.063Measure the locking screw length using the depth gauge.Make sure that the hook is just outside the far cortex andthat the sleeve is firmly pressed against the near cortex.Control the correct position of the hook of the depth gaugein regard to the far cortex of the femur.Read the measurement on the shaft of the depth gauge,which corresponds to the appropriate length of the lockingscrew.44 Synthes Expert Retrograde /Antegrade Femoral Nail Technique Guide