Expert R/AFN Retrograde /Antegrade Femoral Nail. - Osteosyntese

More documents

Recommendations

Info

Antegrade approach –Standard locking1Mount aiming armInstrument03.010.049 Aiming Arm, for Expert R /AFN,antegrade, for Standard LockingUsing the screwdriver (03.010.092) confirm thatthe connecting screw (03.010.042) between the insertionhandle (03.010.046) and the nail is well tightened.Mount the aiming arm to the insertion handle.Note: Do not exert forces on the aiming arm, protectionsleeve, drill sleeves and drill bits in order to guaranteea good drilling precision through the proximal locking holesand to avoid breakage of the drill bits.Proximal locking screwsFor the two proximal locking screws, follow the proceduredescribed in section “Retrograde approach – Standardlocking, steps 2 to 4”.Use the LM hole and LM slot for proximal locking.The dynamic locking option corresponds to the upperposition of the LM slot. This type of locking allowscontrolled dynamisation of the bone fragments.66 Synthes Expert Retrograde /Antegrade Femoral Nail Technique Guide
Antegrade approach –End cap insertion1Insert end capInstrument03.010.110 Screwdriver Stardrive, T40,length 300 mmRemove the nail insertion instruments.Align the end cap, cannulated, with extension 0–20 mm(04.003.000– 004) with the nail axis using the screwdriverStardrive T40 (03.010.110).To minimise the chance of cross-threading, turn the end capcounter-clockwise until the thread of the end cap aligns withthat of the nail.By turning clockwise, screw the end cap into the nail andtighten it firmly.Synthes 67
Page 3 and 4:
Table of ContentsIntroductionFeatur
Page 5 and 6:
Synthes 3
Page 7 and 8:
Unique distal locking optionsThe un
Page 9 and 10:
AO/ASIF principles ofinternal fixat
Page 11 and 12:
IndicationsIndications for retrogra
Page 13 and 14:
preoperativepostoperativepreoperati
Page 15 and 16:
3Measure for length and diameter of
Page 17 and 18: Place the radiographic ruler for na
Page 19 and 20: 6Insert guide wire7- 9ºInstruments
Page 21 and 22: 7aOpen medullary canal - drill bitI
Page 23 and 24: Retrograde approach -Reaming (optio
Page 25 and 26: Check that the connecting screw is
Page 27 and 28: The correct insertion depth must be
Page 29 and 30: Retrograde approach -Standard locki
Page 31 and 32: 3Drill and measure for length of lo
Page 33 and 34: 4Insert locking screwInstrument03.0
Page 35 and 36: Retrograde approach -Spiral blade l
Page 37 and 38: 3Insert guide wireInstrument03.010.
Page 39 and 40: 6Insert spiral bladeInstruments03.0
Page 41 and 42: Retrograde approach -End cap insert
Page 43 and 44: 2Align image intensifierCheck the r
Page 45 and 46: Alternative instrument03.010.104 Dr
Page 47 and 48: Alternative instrument03.010.106 Di
Page 49 and 50: Retrograde Approach -Interlocking w
Page 51 and 52: Distal spiral blade lockingInsert s
Page 53 and 54: Final view of implanted Expert Retr
Page 55 and 56: 3Measure for length and diameter of
Page 57 and 58: Place the radiographic ruler for na
Page 59 and 60: 6Insert guide wireInstruments03.010
Page 61 and 62: 7aOpen medullary canal - drill bitI
Page 63 and 64: Antegrade approach -Reaming (option
Page 65 and 66: The anterior bow of the nail must b
Page 67: Alternative instruments03.010.047 C
Page 71 and 72: Antegrade approach -Freehand lockin
Page 73 and 74: 2Remove spiral bladeInstruments357.
Page 75 and 76: 4Attach extraction screw and hammer
Page 77 and 78: ImplantsNailsAll implants are avail
Page 79 and 80: Expert Retrograde/Antegrade Femoral
Page 81 and 82: Locking implantsSpiral blades for E
Page 83 and 84: Locking Screws Stardrive 5.0 mm (l
Page 85 and 86: InstrumentsStandard instrumentation
Page 87 and 88: 03.010.030 Protection Sleeve 13.0,f
Page 89 and 90: 03.010.070 Trocar 4.0 mm, for No.
Page 91 and 92: Optional instruments351.050 Tissue
Page 93 and 94: Vario Case68.003.010 Vario Case for
Page 95 and 96: Power tools530.010 Power Drive, com
Page 97 and 98: DFN instrumentation upgrade356.980
Page 100: Presented by:Ö036.000.519öAAJä03
show all

Expert R/AFN Retrograde /Antegrade Femoral Nail. - Osteosyntese

Create successful ePaper yourself

Delete template?

Save as template?