MODEL LC-20SH1E - Page de test - Free
MODEL LC-20SH1E - Page de test - Free
MODEL LC-20SH1E - Page de test - Free
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>LC</strong>-<strong>20SH1E</strong>9) Finally click [Restart System] to initialize. Confirm "Reset done" in Comment Window.10) Power OFF the set by unplugging AC Cord, remove the JIG from the plug and wait for 1 minute beforepower ON again.Notes: If any error occur during any process, power OFF the set and repeat the all the process again. Ifthese still fail, please erase Main Software and repeat the whole process again. To erase Main software,please refer to MAIN microprocessor step No. 1) to 5) only.2. MAIN microprocessor1) Set JIG switch to position "LOC".2) Power ON the set and plug Interface JIG connector to P2002.3) Run the WISP.exe program.18
Change language