Step-by-Step Tutorial For Using LinkSprite UART- WIFI Module ...

ePAPER READ

DOWNLOAD ePAPER

thaieasyelec.net

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

Step 3: In your PC start/run, type cmd and return. Find out your IP configuration byipconfig. You can find the IP address, subnet mask, and default gateway. Thisinformation will be used in the Client configuration.Page 6 of 12

ES- JBM-141SPP Module Application Note - ThaiEasyElec.net

SUN7_User Manual_v1_01 - ThaiEasyElec.net

Arduino VS1003B MP3 Audio Shield ™ - ThaiEasyElec.net

Arduino 13.56MHz Rfid Shields User's Manual ... - ThaiEasyElec.net

Venus Supply Co., Ltd. Page 1 - ThaiEasyElec.net

ก F VRbot - Voice Recognition Module - ThaiEasyElec.net

Arduino Serial LCD Keypad Shield™ - ThaiEasyElec.net

mini SUN7 Manual English V1.00 (PDF, 1.2MB) - ThaiEasyElec.net

Chapter 2.4 Qtopia 2.2.0 Linux Graphical ... - ThaiEasyElec.net

ThaiEasyElec - 2.8 inch TFT Touch Shield User ... - ThaiEasyElec.net

ประวัติรศ. ร.อ. ดร. วีระเชษฐ ขันเงิน การศึกษา - ThaiEasyElec.net

Step 4: Open the Client software. First click on Close under Serial Configure.Select correct serial port number that is found out in X-CTU. Select the baud rate.Then click on Open. This opens the serial port.Step 5: Click on Scan under Control. The found WiFi network is shown in the outputwindow. Record the channel number, BSSID, and SSID, which will be used in theconfiguration.Page 7 of 12

Page 1 and 2: Step-by-Step Tutorial ForUsing Link
Page 5: Test ProcedureStep 1: Open X-CTU. F
Page 9 and 10: Set the System parameters, includin
Page 11 and 12: For details of the UATT data format

Step-by-Step Tutorial For Using LinkSprite UART- WIFI Module ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?