EchoTREK ST/SB-400 - Nivelco Process Control Co., Inc.

Enter into or quit programming modes Basic steps while parameter address is blinking Basic steps while parameter value is blinkingEFull ParameterAccessQuicksetECancel all modifications **Return to default*DefaultParameter valueECancel all modificationsreturn to parameter address*Display default valueActualParameter value* LOAD readout ** CANCEL readout* cancellation immediately activeGET LEVEL functionSpecial function used only in level and distance measurement modes UP + DOWNNotes:If after pressing ENTER E blinking does not spring over from the parameter address to the parameter value this means that• the parameter is either a read-out type, or• the secret code prevents the modification (see P99)If the modification of the parameter value is not accepted i.e. the parameter value keeps blinking after pressing ENTER E ,• the modified value is either out of the range, or• the code entered is not a valid code5.2.3 Indications of the SAP-200 and LED StatusRELAYLED indication• VALID (ECHO)-LEDlit in case ofvalid echo.• COM-LEDsee description of HART• RELAY-LEDON – when the ‘C2’ circuit of the relayis closed60/22 ♦ sba4802a0600p_02