AT500 OWNERS MANUAL - weller truck parts

More documents

Recommendations

Info

APPROVEDLUBRICANTSTES295 Approved MarketerApprovalNumberProduct BrandnameAN-011001 Castrol Heavy Duty Lubricants TranSyndAN-031002 BP Lubricants Autran Syn 295AN-031003 Cognis Corporation Emgard 2805AN-031004 International Truck & Engine Company Fleetrite Synthetic ATFAN-051005 ExxonMobil Lubricants and Petroleum Specialties Company Mobil Delvac Synthetic AFTAN-071006 John Deere & Company HD SynTranAN-1010007 Volvo Trucks North America Bulldog Synthetic ATFAN-121009 Case New Holland CNH HD Synthetic ATFAN-121008 Shell International Petroleum Co. LTD. Shell Spirax S6 ATF A295TES-389Product Marketer Product Brandname NAmerica CAmerica Approval NumberBP Castrol Castrol ATF Heavy Duty Yes Yes AA-33182010BP Castrol Castrol ATF Heavy Duty Yes Yes AA-33192010BP Lubricants Castrol Heavy Duty Multi-Purpose ATF Yes Yes AA-32252007BP Lubricants Castrol Heavy Duty Multi-Purpose ATF Yes Yes AA-32362007Chevron Products Company Chevron Automatic Transmission Fluid HD-389 Yes Yes AA-32012007Chevron Products Company Chevron Automatic Transmission Fluid HD-389 Yes Yes AA-32202007Chevron Products Company Chevron Automatic Transmission Fluid HD-389 Yes Yes AA-32242007Chevron Products CompanyChevron Synthetic Automatic Transmission FluidHeavy DutyYes Yes AA-31992007Chevron Products Company Texaco Automatic Transmission Fluid HD-389 Yes Yes AA-32002007ExxonMobil Lubricants &Petroleum Specialties Co.Mobile ATF D/M Yes Yes AA-32792008Fuchs Petrolub AG Fuchs Titan ATF 4000 Yes Yes AA-32822010Petro-Canada Petro-Canada ATF D3M Yes Yes AA-32082007RavensbergerSchmierstoffvertrieb GMBHShell International PetroleumCo. LTD.Ravenol ATF III H Yes Yes AA-33072010Spirax S2 ATF A389 Yes Yes AA-33242011Shell Lubricants Donax TA-389 Yes Yes AA-32212007Shell Lubricants Donax TX Yes Yes AA-32332007THE WELLER REMAN NETWORK8
Why Shift LinkageIs ImportantThe shift lever on a transmission moves inside the valve body, which distributes main pressureto the various clutches in the transmission. If the valve is in between two clutch ports, mainpressure will be restricted to the clutch to move the truck. The result is transmission failure.Typical shift linkage adjustment complaints:1. Shift lever (in cab) does not line up with the gear selected.2. Slow engagement to forward or reverse.3. Truck creeps forward or backward in neutral.4. Reverse beeper operates intermittently in reverse or in neutral or not at all.Correction:One person is needed inside the cab and another person at the transmission shift lever. At thetransmission, remove the cotter key or retaining clip and remove the cable clevis pin from thetransmission shift lever. Have the person in the cab select each gear with the cable removed.Lock the shifter in each gear while the person at the transmission moves the lever to itscorresponding position and reinserts the clevis pin in and out freely. This needs to be done ineach gear. If failure of the clevis pin to line up with the lever after adjustment results, the cablemay be sticking and needs to be replaced or the lever /cable geometry is incorrect or the leverid too short or too long.Why modulator adjustment is important:The modulator is attached to the transmission to the rear or the shift lever and neutral safetyswitch. Its function is to vary the shift points depending on the throttle position. In otherwords, a part throttle condition (I.e. city driving) will result in an “early” or lower up shiftand a full throttle condition will result in a “later” or higher upshift. What happens when themodulator is not working properly is an early or too soon up shift at full throttle conditions.You may notice the engine RPM “flare” 200-300 RPM between shifts. Driving a truck thatshifts “too soon” will lug the engine and place undue stress on the transmission. Imaginedriving a manual transmission truck and you attempt a 3rd or 4th gear shift from a rolling stop.The clutch will try to absorb output torque load. But if it doesn’t the clutch slips. This sametheory applies with automatics.There are Four Different Types of Modulator:1. Cable Operated – One end will attach to either the engines governor/carburetor ordirectly to the accelerator pedal. The transmission end uses a fulcrum to move themodulator pin. This cable will either push or pull to full throttle depending on yourvehicles set up.2. Air – This modulator uses an air signal from the engine governor to move themodulator pin.THE WELLER REMAN NETWORK9(continued on page 10)
Page 1 and 2: AT500 OWNERS MANUALTag #Mileage In:
Page 3 and 4: PROGRAMDESCRIPTIONWeller’s Unit E
Page 5 and 6: DYNO TESTINGAll transmissions aredy
Page 7: INSTALLATIONGUIDEIV. DRIVELINE• C
Page 11 and 12: ALLISON JOB AIDAllison Job AidSHIFT
Page 13 and 14: SERVICE TIPSTHE WELLER REMAN NETWOR
Page 15 and 16: CORE RETURNINSTRUCTIONSThe Weller T
Page 17 and 18: WELLER WARRANTYCALL WELLER FIRST!Po
Page 19 and 20: WELLER WARRANTYWarrantyIt is essent

AT500 OWNERS MANUAL - weller truck parts

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?