Micro Motion® Filling Mass Transmitters with ... - BKW Instruments

SpecificationsPhysical specificationsHousing and mountingTransmitter: 316L stainless steelSensor: Refer to sensor specifications for sensor case materials.Transmitter is integrally mounted to sensor at factory and electronics are encapsulated.Surface finish options:• Standard (130 Ra)• Improved (64 Ra)WeightTransmitter: 7.1 lb (3.2 kg)Sensor: Refer to sensor specifications for sensor weight.Dimensions Transmitter: 2″ × 8.95″ × 5.2″ (50.8 × 227.3 × 101.6 mm). See figure on page 7.Sensor: Refer to sensor specifications for sensor dimensions.Status LEDOne or two status indicators on internal transmitter module (for commissioning, notvisible in normal use)• LED1: Indicates transmitter status• LED2: Indicates PROFIBUS-DP connection status (1)(1) Available only with Output Option Q, U, or V.Electrical connectionsConnection typePower connectionDigital communicationsM-12 circular connectorsOutput OptionsP, Q, R, S, U, VOutput Option TOutput OptionsP, R, S, TOutput Options Q, U, VPower and mA on same connectormA on separate connectorModbusPROFIBUS-DPPower supplyPower requirementsFuseSafetyInput supply: 24 VDCSystem requirements: 5.5 W (device) + I/O requirements (1 A max at 24 VIOpassthrough)Device fuse: 800 mA24 VIO fuse: 1.6 AReverse-polarity and short-circuit protectionComplies with low voltage directive 2006/95/EC per IEC 61010-1Installation (overvoltage) Category II, Pollution Degree 24 Micro Motion ® Filling Mass Transmitters