Micro MotionÂ® Filling Mass Transmitters with ... - BKW Instruments

More documents

Recommendations

Info

Specifications continuedHost interfaceOutput Options P, R, S, TOutput Options Q, U, VMicro Motion ProLink II v2.9.1 supports all functionalityMicro Motion ProLink II v2.9.1 supports basic functionalitySiemens SIMATIC PDM required for complete device configurationSupplied with transmitter:• GSD conforming to the PROFIBUS-DP specification- Provides PROFIBUS Class 1 Master functions- Enables control of all input and output process data• EDD conforming to PROFIBUS EDDL specifcation- Provides PROFIBUS Class 2 Master functions- Enables device configurationEnvironmental limitsAmbient temperature limitsHumidity limitsVibration limitsOperating and storage: –32 to +140 °F (–25 to +60 °C)5 to 95% relative humidity, non-condensing at 140 °F (60 °C)Meets IEC68.2.6, endurance sweep, 20 to 2000 Hz, 50 sweep cycles at 1.5 gEnvironmental effectsEMI effectsComplies with EMC directive 2004/108/ECComplies with NAMUR NE21Ambient temperature effect On mA output: ±0.005% of span per °CHazardous area classificationsCSA (1) C-USATEX (2)IECEx (3)Class I Division 2 Groups A, B, C, DClass II Division 2 Groups F and GII 3G Ex nA IIC T5 Gc (Zone 2)II 3D Ex tc IIIC T70°C Dc IP66/IP67Ex nA IIC T5 Gc(1) CSA is a Canadian approvals agency that provides approvals accepted both in Canada and in the U.S.A. (C-US).(2) ATEX is a European directive.(3) IECEx is an international directive.6 Micro Motion ® Filling Mass Transmitters
Specifications continuedDimensionsDimensions ininches(mm)2.000(50.8)8.500(215.9)5.332(135.4)4.242(107.7)Micro Motion ® Filling Mass Transmitters 7
Page 1 and 2: Product Data SheetPS-001350, Rev. B
Page 3 and 4: Micro Motion Filling Mass Transmitt
Page 8 and 9: Ordering informationModelFMTCodeSIC
Page 10 and 11: 10 Micro Motion ® Filling Mass Tra
Page 12: Micro Motion—The undisputed leade

Micro MotionÂ® Filling Mass Transmitters with ... - BKW Instruments

Create successful ePaper yourself

Delete template?

Save as template?