Normas - IPQ

NormasAbril 2009Pretende-se com esta publicação mensal fazer a divulgação das Normas Portuguesas recentemente editadas e anuladas,bem como das Normas Europeias adoptadas como Normas Portuguesas.Divulgam-se ainda as Normas Europeias e Internacionais publicadas e já disponíveis.ÍndicePágina1. Normas Portuguesas1.1 Normas Portuguesas publicadas 21.2 Normas Portuguesas anuladas 41.3 Normas Portuguesas em re-exame 61.4 Normas Europeias adoptadas 72. Normas Europeias Publicadas2.1 CEN 82.2 CENELEC 172.3 CEN/CENELEC 202.4 ETSI 213. Normas Internacionais publicadasIEC22ISOInstituto Português da QualidadeRua António Gião, 2 2829-513 CAPARICATel +351 212 948 100 Fax +351 212 948 223Internet www.ipq.pt16 Abril 2009

1. Normas Portuguesas1.1 Normas Portuguesas publicadasNos termos do Decreto-Lei nº 142/2007, de 27 de Abril, e tendo em conta o disposto na Directiva CNQ 3/2001,informa-se que as Normas Portuguesas referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NP ENV, número,parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, onúmero do Termo de Homologação e a respectiva data.C30 / CT 3 – ICS 87.040NP EN ISO 11890-1:2009 ( 2ª Edição ) Preço: 14,00 EURTintas e vernizes Determinação do teor de compostos orgânicosvoláteis (COV) Parte 1: Método da diferença(ISO 11890-1:2007)EN ISO 11890-1:2007 IDTTermo de Homologação nº 2009/0037, 2009-02-17C30 / CT 3 – ICS 87.040NP EN ISO 11890-2:2009 ( 2ª Edição ) Preço: 21,00 EURTintas e vernizes Determinação do teor de compostos orgânicosvoláteis (COV) Parte 2: Método da cromatografia em fase gasosa(ISO 11890-2:2006)EN ISO 11890-2:2006 IDTTermo de Homologação nº 2009/0038, 2009-02-17C40 / CT 4 – ICS 59.080.01NP EN ISO 105-C08:2005 /A 1:2009 ( 1ª Edição ) Preço: 7,00EURTêxteis Ensaios de solidez dos tintos Parte C08: Solidez dostintos à lavagem doméstica e comercial utilizando um detergentede referência não fosfatado contendo um activador debranqueamento a baixa temperatura - Emenda 1(ISO 105-C08:2001/Amd 1:2006)EN ISO 105-C08:2002 /A 1:2008 IDTTermo de Homologação nº 2009/0049, 2009-03-16C120 / CT 12 – ICS 25.220.60; 77.140.65NP EN 10245-1:2009 ( 2ª Edição )Preço: 21,00 EURArames e produtos trefilados de aço Revestimentos orgânicos emarames de aço Parte 1: Princípios geraisEN 10245-1:2001 IDTTermo de Homologação nº 2009/0024, 2009-01-26C120 / CT 12 – ICS 25.220.60; 77.140.65NP EN 10245-2:2009 ( 2ª Edição )Preço: 10,50 EURArames e produtos trefilados de aço Revestimentos orgânicos emarames de aço Parte 2: Arames revestidos de PVCEN 10245-2:2001 IDTTermo de Homologação nº 2009/0025, 2009-01-26C121 / CT 12 – ICS 25.220.60; 77.140.65NP EN 10245-3:2009 ( 2ª Edição )Preço: 10,50 EURArames e produtos trefilados de aço Revestimentos orgânicos emarames de aço Parte 3: Arames revestidos de PEEN 10245-3:2001 IDTTermo de Homologação nº 2009/0026, 2009-01-26C350 / CT 35 – ICS 67.120.10NP 589:2008 ( 3ª Edição )Preço: 7,00 EURChouriço de carne Definição, classificação, características eacondicionamentoTermo de Homologação nº 2008/0002, 2008-01-21C350 / CT 35 – ICS 67.120.10NP 4451:2008 ( 1ª Edição )Preço: 7,00 EURChourição Definição, classificação, características eacondicionamentoTermo de Homologação nº 2008/0006, 2008-01-21C710 / CT 71 – ICS 13.030.40; 13.040.40NP EN 12619:2009 ( 1ª Edição )Preço: 21,00 EUREmissões de fontes fixas Determinação da concentração mássica decarbono orgânico gasoso total de efluentes gasosos em baixasconcentrações Método em contínuo de detecção por ionização dechamaEN 12619:1999 IDTTermo de Homologação nº 2009/0060, 2009-03-25C710 / CT 71 – ICS 13.040.40NP EN 13284-1:2009 ( 1ª Edição )Preço: 42,50 EUREmissões de fontes fixas Determinação da concentração mássica departículas em baixas concentrações Parte 1: Método gravimétricomanualEN 13284-1:2001 IDTTermo de Homologação nº 2009/0061, 2009-03-25C710 / CT 71 – ICS 13.040.40NP EN 13526:2009 ( 1ª Edição )Preço: 21,00 EUREmissões de fontes fixas Determinação da concentração mássica docarbono orgânico gasoso total em efluentes gasosos resultantes deprocessos com utilização de solventes Método em contínuo dedetecção por ionização de chamaEN 13526:2001 IDTTermo de Homologação nº 2009/0050, 2009-03-19C710 / CT 71- ICS 13.040.20; 13.040.30NP EN ISO 16017-1:2009 ( 1ª Edição ) Preço: 37,50 EURAr interior, ar ambiente e ar de locais de trabalho Amostragem eanálise de compostos orgânicos voláteis por tubos deadsorção/desadsorção térmica/cromatografia gasosa capilar Parte1: Amostragem com bomba(ISO 16017-1:2000)EN ISO 16017-1:2000 IDTTermo de Homologação nº 2009/0064, 2009-03-30C710 / CT 71- ICS 13.040.01NP ISO 8756:2009 ( 1ª Edição )Preço: 10,50 EURQualidade do ar Tratamento de dados de temperatura, de pressão ede humidadeISO 8756:1994 IDTTermo de Homologação nº 2009/0048, 2009-03-16C980 / CT 98 – 91.060.10NP EN 13830:2009 ( 1ª Edição )Preço: 24,50 EURFachadas-cortina Norma de produtoEN 13830:2003 IDTTermo de Homologação nº 2009/0040, 2009-02-17Lista Mensal - Normas p. 2 de 28 15 Abril 2009

E200 / CT 2 – 01.040.29; 29.100.20NP EN 60276:2009 ( 1ª Edição )Preço: 31,50 EURDefinições e nomenclatura para escovas de carvão, porta-escovas,colectores (de lâminas) e anéis(IEC 60276:1968 + A1:1987)EN 60276:1996 IDTTermo de Homologação nº 2009/0063, 2009-03-27Lista Mensal - Normas p. 3 de 28 15 Abril 2009

1.2 Normas Portuguesas anuladasNos termos do Decreto-Lei nº 142/2007, de 27 de Abril, e tendo em conta o disposto na Directiva CNQ 3/2001,informa-se que as anulações das Normas Portuguesas referenciadas tornam-se efectivas no dia seguinte ao da ediçãodesta Lista Mensal.Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NP ENV, número,parte e data), o título, a correspondência a documentos europeus e/ou internacionais quando existam, o número doTermo de (Anulação, Homologação ou Adopção) e a respectiva data, bem como a referência do documento que asubstitui.C280 / CT 28NP EN 29053:2000Acústica Materiais para aplicações acústicas Determinação daresistência ao escoamento de arEN 29053:1993 IDTAnulada em: 2009-03-2Substituida por: NP EN 29053:2009C350 / CT 35NP 1614:2002 ( 2ª Edição )Carnes e produtos cárneos Determinação do teor de humidadeMétodo de referênciaAnulada em: 2009-03-2C350 / CT 35NP 1614:2008Carnes e produtos cárneos Determinação do teor de humidadeMétodo correnteAnulada em: 2009-03-2Substituida por: NP 1614-1:2009C350 / CT 35NP 1847:1986 ( 1ª Edição )Carnes, derivados e produtos cárneos Determinação do teor denitratos Processo de referênciaAnulada em: 2009-03-2C350 / CT 35NP 1847:1986 /Emenda 1:1988 ( 1ª Edição )Carnes e produtos cárneos Determinação do teor de nitratos Processode referênciaAnulada em: 2009-03-2C350 / CT 35NP 1847:2008Carnes e produtos cárneos Determinação do teor de nitratos Métodode referênciaAnulada em: 2009-03-2Substituida por: NP 1847-1:2009C710 / CT 71NP EN 12619:2007Emissões de fontes fixas Determinação da concentração mássica decarbono orgânico gasoso total de efluentes gasosos em baixasconcentrações Método em contínuo de detecção por ionização dechamaEN 12619:1999 IDTAnulada em: 2009-03-2Substituida por: NP EN 12619:2009C710 / CT 71NP EN 13284-1:2004Emissões de fontes fixas Determinação da concentração mássica departículas em baixas concentrações Parte 1: Método gravimétricomanualEN 13284-1:2001 IDTAnulada em: 2009-03-2Substituida por: NP EN 13284-1:2009C710 / CT 71NP EN 13526:2007Emissões de fontes fixas Determinação da concentração mássica docarbono orgânico gasoso total em efluentes gasosos resultantes deprocessos com utilização de solventes Método em contínuo dedetecção por ionização de chamaEN 13526:2001 IDTAnulada em: 2009-03-1Substituida por: NP EN 13526:2009C710 / CT 71NP EN ISO 16017-1:2004Ar interior, ar ambiente e ar de locais de trabalho Amostragem eanálise de compostos orgânicos voláteis por tubos deadsorção/desadsorção térmica/cromatografia gasosa capilar Parte1: Amostragem com bomba(ISO 16017-1:2000)EN ISO 16017-1:2000 IDTAnulada em: 2009-03-3Substituida por: NP EN ISO 16017-1:2009C710 / CT 71NP ISO 8756:2000Qualidade do ar Tratamento de dados de temperatura, de pressão ede humidadeAnulada em: 2009-03-1Substituida por: NP ISO 8756:2009C710 / CT 71NP ISO 11222:2004Qualidade do ar Determinação da incerteza da média temporal dasmedições de qualidade do arISO 11222:2001 IDTAnulada em: 2009-03-3Substituida por: NP ISO 11222:2009C710 / CT 71NP ISO 13752:2004Qualidade do ar Avaliação da incerteza do método de medição emensaio de campo utilizando um segundo método como referênciaISO 13752:1998 IDTAnulada em: 2009-03-3Substituida por: NP ISO 13752:2009C1110 / CT 111NP EN 962:2000 ( 1ª Edição )Garrafas para transporte de gases Capacetes de protecção fixos eamovíveis das válvulas de garrafas para gases industriais emedicinais Projecto, construção e ensaiosEN 962:1996 IDTAnulada em: 2009-03-3Substituida por: EN ISO 11117:2008E6100 / CTE 61NP EN 50165:2000 ( 1ª Edição )Equipamento eléctrico de aparelhos não eléctricos para usosdomésticos e análogos Regras de segurançaEN 50165:1997 IDT;EN 50165:1997 /CORRIGENDUM Feb:1998 IAnulada em: 2009-03-2Substituida por: EN 60335-2-102:2006Lista Mensal - Normas p. 4 de 28 15 Abril 2009

E6100 / CTE 61NP EN 50165:2000 /A 1:2003 ( 1ª Edição )Equipamento eléctrico de aparelhos não eléctricos para usosdomésticos e análogos Regras de segurançaEN 50165:1997 /A 1:2001 IDTAnulada em: 2009-03-2Substituida por: EN 60335-2-102:2006E6100 / CTE 61NP EN 60335-2-97:2002 ( 1ª Edição )Segurança dos aparelhos electrodomésticos e análogos Parte 2-97:Regras particulares para as motorizações de persianas, toldos,estores e equipamentos similares(IEC 60335-2-97:1998, modificada)EN 60335-2-97:2000 IDTAnulada em: 2009-03-2Substituida por: EN 60335-2-97:2006M029 /NP EN 50083-2:2003 ( 1ª Edição )Sistemas de distribuição por cabo destinados a sinais de televisão,de radiodifusão sonora e de multimédia interactiva Parte 2:Compatibilidade electromagnética para os equipamentosEN 50083-2:2001 IDTAnulada em: 2009-03-2Substituida por: EN 50083-2:2006Lista Mensal - Normas p. 5 de 28 15 Abril 2009

1.3 Normas Portuguesas em re-exameCom o objectivo de se assegurar a actualidade das normas integrantes do acervo normativo nacional, as NormasPortuguesas devem ser objecto de um re-exame periódico.Mensalmente, o IPQ colocará em inquérito público, por um período de 30 dias úteis, através da Lista MensalNormas e do site, uma lista de normas portuguesas pertencentes a um determinado escalão etário.Para cada referência, menciona-se a designação codificada (prefixo NP, número, parte e data), o título e a respectivadata, bem como o seu autor.Pretende-se com este inquérito público, que os interessados que pretendam dar os seus contributos o possam fazer, paracada uma das normas portuguesas constantes na presente listagem, respondendo aos seguintes pontos, tendo em conta avossa experiência:1 - Avaliação em termos de actualidade, a responder em alternativa:‣ A norma portuguesa está actual ?‣ A norma portuguesa deve ser revista ?‣ A norma portuguesa está obsoleta ?2 - Eventual legislação relacionada:‣ A norma portuguesa está referida em legislação ? Se sim, qual ?3 - ComentárioNOTA: Os interessados são convidados a pronunciarem-se somente sobre as normas que entendam conveniente,devendo enviar a informação ao Serviço de Normalização (NOR@mail.ipq.pt).LISTA VAZIALista Mensal - Normas p. 6 de 28 15 Abril 2009

1.4 Normas Europeias adoptadasNos termos do Decreto-Lei nº 142/2007, de 27 de Abril, e tendo em conta o disposto na Directiva CNQ 3/2001, e emcumprimento das Regras dos Organismos Europeus de Normalização CEN, CENELEC e ETSI, as adopções dasNormas Europeias referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.Para cada Norma, indica-se a designação codificada (prefixo, número, ano), o título, o número do Termo de Adopção ea respectiva data.Os textos das Normas Europeias Adoptadas como Normas Portuguesas estão disponíveis para consulta ou aquisiçãoneste Instituto nas línguas oficiais do CEN/CENELEC (inglês, francês e alemão) e do ETSI (inglês).LISTA VAZIALista Mensal - Normas p. 7 de 28 15 Abril 2009

2. Normas Europeias publicadas2.1 CENNormas Europeias aprovadas na área não electrotécnica pelo Comité Europeu de Normalização (CEN), e pelo ComitéEuropeu para a Normalização do Ferro e do Aço (ECISS).Para cada referência, menciona-se o comité técnico, a designação codificada e o título.CWA 15517:2009 ( Ed. 2 )European Handbook for Defence ProcurementCWA 15931-1:2009 ( Ed. 1 )Disaster and emergency management Shared situation awarenessPart 1: Message structureCWA 15931-2:2009 ( Ed. 1 )Disaster and emergency management Shared situation awareness Part2: Codes for the message structureCWA 15940:2009 ( Ed. 1 )Automotive fuels Paraffinic diesel from synthesis orhydrotreatment Requirements and test methodsEN 15744:2009 ( Ed. 1 )Film identification Minimum set of metadata for cinematographicworksTC 19EN 15691:2009 ( Ed. 1 )Ethanol as a blending component for petrol Determination of dryresidue (involatile material) Gravimetric methodTC 54EN 13445-4:2002 /A 5:2009 ( Ed. 1 )Unfired pressure vessels Part 4: FabricationTC 55EN ISO 21531:2009 ( Ed. 1 )Dentistry Graphical symbols for dental instruments(ISO 21531:2009)TC 74EN 1591-1:2001+A1:2009 ( Ed. 1 )Flanges and their joints Design rules for gasketed circular flangeconnections Part 1: Calculation methodTC 79EN 15333-2:2009 ( Ed. 1 )Respiratory equipment Open-circuit umbilical supplied compressedgas diving apparatus Part 2: Free flow apparatusTC 89EN ISO 15927-2:2009 ( Ed. 1 )Hygrothermal performance of buildings Calculation and presentationof climatic data Part 2: Hourly data for design cooling load(ISO 15927-2:2009)TC 89EN ISO 15927-3:2009 ( Ed. 1 )Hygrothermal performance of buildings Calculation and presentationof climatic data Part 3: Calculation of a driving rain index forvertical surfaces from hourly wind and rain data(ISO 15927-3:2009)TC 98EN 1398:2009 ( Ed. 2 )Dock levellers Safety requirementsTC 104EN 12350-1:2009 ( Ed. 2 )Testing fresh concrete Part 1: SamplingTC 104EN 12350-2:2009 ( Ed. 2 )Testing fresh concrete Part 2: Slump-testTC 104EN 12350-3:2009 ( Ed. 2 )Testing fresh concrete Part 3: Vebe testTC 104EN 12350-4:2009 ( Ed. 2 )Testing fresh concrete Part 4: Degree of compactabilityTC 104EN 12350-5:2009 ( Ed. 2 )Testing fresh concrete Part 5: Flow table testTC 104EN 12390-3:2009 ( Ed. 2 )Testing hardened concrete Part 3: Compressive strength of testspecimensTC 104EN 12390-5:2009 ( Ed. 2 )Testing hardened concrete Part 5: Flexural strength of testspecimensTC 104EN 12390-7:2009 ( Ed. 2 )Testing hardened concrete Part 7: Density of hardened concreteTC 104EN 12390-8:2009 ( Ed. 2 )Testing hardened concrete Part 8: Depth of penetration of waterunder pressureTC 104EN 12504-1:2009 ( Ed. 2 )Testing concrete in structures Part 1: Cored specimens - Taking,examining and testing in compressionTC 104EN 13263-1:2005+A1:2009 ( Ed. 1 )Silica fume for concrete Part 1: Definitions, requirements andconformity criteriaTC 104EN 13263-2:2005+A1:2009 ( Ed. 1 )Silica fume for concrete Part 2: Conformity evaluationTC 107EN 448:2009 ( Ed. 3 )District heating pipes Preinsulated bonded pipe systems for directlyLista Mensal - Normas p. 8 de 28 15 Abril 2009

uried hot water networks Fitting assemblies of steel service pipes,polyurethane thermal insulation and outer casing of polyethyleneTC 107EN 489:2009 ( Ed. 3 )District heating pipes Preinsulated bonded pipe systems for directlyburied hot water networks Joint assembly for steel service pipes,polyurethane thermal insulation and outer casing of polyethyleneTC 107EN 14419:2009 ( Ed. 2 )District heating pipes Preinsulated bonded pipe systems fordirectly buried hot water networks Surveillance systemsTC 112EN 316:2009 ( Ed. 3 )Wood fibre boards Definition, classification and symbolsTC 112EN 14279-:2004+A1:2009 ( Ed. 1 )Laminated Veneer Lumber (LVL) Definitions, classification andspecificationsTC 114EN 953-:1997+A1:2009 ( Ed. 1 )Safety of machinery Guards General requirements for the design andconstruction of fixed and movable guardsTC 121EN 1011-1:2009 ( Ed. 2 )Welding Recommendations for welding of metallic materials Part 1:General guidance for arc weldingTC 121EN 15617:2009 ( Ed. 1 )Non-destructive testing of welds Time-of-flight diffractiontechnique (TOFD) Acceptance levelsTC 122EN 614-1:2006+A1:2009 ( Ed. 1 )Safety of machinery Ergonomic design principles Part 1:Terminology and general principlesTC 123EN ISO 11810-2:2009 ( Ed. 2 )Lasers and laser-related equipment Test method and classification forthe laser-resistance of surgical drapes and/or patient-protectivecovers Part 2: Secondary ignition(ISO 11810-2:2007)TC 127EN 1366-3:2009 ( Ed. 2 )Fire resistance tests for service installations Part 3: Penetration sealsTC 133EN 15690-2:2009 ( Ed. 1 )Copper and copper alloys Determination of iron content Part 2:Flame atomic absorption spectrometric method (FAAS)TC 136EN 957-5:2009 ( Ed. 2 )Stationary training equipment Part 5: Stationary exercise bicyclesand upper body crank training equipment, additional specific safetyrequirements and test methodsTC 136EN ISO 8936:2009 ( Ed. 1 )Awnings for leisure accommodation vehicles Requirements andtest methods(ISO 8936:2007)the density of the coating material, and calculation of the theoreticalspreading rate(ISO 23811:2009)TC 142EN 1870-3:2001+A1:2009 ( Ed. 1 )Safety of woodworking machines Circular sawing machines Part 3:Down cutting cross-cut saws and dual purpose down cuttingcross-cut saws/circular saw benchesTC 143EN 692-:2005+A1:2009 ( Ed. 1 )Machine tools Mechanical presses SafetyTC 143EN 693-:2001+A1:2009 ( Ed. 1 )Machine tools Safety Hydraulic pressesTC 143EN 12417-:2001+A2:2009 ( Ed. 1 )Machine tools Safety Machining centresTC 143EN 12717-:2001+A1:2009 ( Ed. 1 )Safety of machine tools Drilling machinesTC 143EN 12957-:2001+A1:2009 ( Ed. 1 )Machine tools Safety Electro discharge machinesTC 143EN 13736-:2003+A1:2009 ( Ed. 1 )Safety of machine tools Pneumatic pressesTC 143EN 13898-:2003+A1:2009 ( Ed. 1 )Machine tools Safety Sawing machines for cold metalTC 143EN 13985-:2003+A1:2009 ( Ed. 1 )Machine tools Safety Guillotine shearsTC 143EN 14070-:2003+A1:2009 ( Ed. 1 )Safety of machine tools Transfer and special-purpose machinesTC 144EN 12733-:2001+A1:2009 ( Ed. 1 )Agricultural and forestry machinery Pedestrian controlled motormowers SafetyTC 144EN 14930-:2007+A1:2009 ( Ed. 1 )Agricultural and forestry machinery and gardening equipmentPedestrian controlled and hand-held machines Determination ofaccessibility of hot surfacesTC 144EN ISO 5674:2009 ( Ed. 3 )Tractors and machinery for agriculture and forestry Guards for powertake-off (PTO) drive-shafts Strength and wear tests and acceptancecriteria(ISO 5674:2004)TC 144EN ISO 14982:2009 ( Ed. 2 )Agricultural and forestry machinery Electromagnetic compatibilityTest methods and acceptance criteria(ISO 14982:1998)TC 139EN ISO 23811:2009 ( Ed. 1 )Paints and varnishes Determination of percentage volume ofnon-volatile matter by measuring the non-volatile matter content andTC 146EN 415-1:2000+A1:2009 ( Ed. 1 )Packaging machines safety Part 1: Terminology and classificationof packaging machines and associated equipmentLista Mensal - Normas p. 9 de 28 15 Abril 2009

TC 147EN 13001-2:2004+A2:2009 ( Ed. 1 )Cranes General design Part 2: Load actionsTC 151EN 474-1:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 1: General requirementsTC 151EN 474-3:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 3: Requirements for loadersTC 151EN 474-4:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 4: Requirements for backhoeloadersTC 151EN 474-5:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 5: Requirements for hydraulicexcavatorsTC 151EN 474-6:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 6: Requirements for dumpersTC 151EN 474-7:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 7: Requirements for scrapersTC 151EN 474-8:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 8: Requirements for gradersTC 151EN 474-9:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 9: Requirements for pipelayersTC 151EN 474-10:2006+A1:2009 ( Ed. 1 )Earth-moving machinery Safety Part 10: Requirements for trenchersTC 151EN 791-:1995+A1:2009 ( Ed. 1 )Drill rigs SafetyTC 151EN 996-:1995+A3:2009 ( Ed. 1 )Piling equipment Safety requirementsTC 151EN 15059:2009 ( Ed. 1 )Snow grooming equipment Safety requirementsTC 153EN 1672-2:2005+A1:2009 ( Ed. 1 )Food processing machinery Basic concepts Part 2: HygienerequirementsTC 155EN 1119:2009 ( Ed. 2 )Plastics piping systems Joints for glass-reinforced thermosettingplastics (GRP) pipes and fittings Test methods for leaktightness andresistance to damage of non-thrust resistant flexible joints withelastomeric sealing elementsTC 155EN 1401-1:2009 ( Ed. 2 )Plastics piping systems for non-pressure underground drainage andsewerage Unplasticized poly(vinyl chloride) (PVC-U) Part 1:Specifications for pipes, fittings and the systemTC 155EN 1447:2009 ( Ed. 2 )Plastics piping systems Glass-reinforced thermosetting plastics(GRP) pipes Determination of long-term resistance to internalpressureTC 155EN 1852-1:2009 ( Ed. 2 )Plastics piping systems for non-pressure underground drainage andsewerage Polypropylene (PP) Part 1: Specifications for pipes,fittings and the systemTC 155EN 14758-1:2005+A1:2009 ( Ed. 1 )Plastics piping systems for non-pressure underground drainage andsewerage Polypropylene with mineral modifiers (PP-MD) Part 1:Specifications for pipes, fittings and the systemTC 155EN ISO 15877-1:2009 ( Ed. 2 )Plastics piping systems for hot and cold water installationsChlorinated poly(vinyl chloride) (PVC-C) Part 1: General(ISO 15877-1:2009)TC 155EN ISO 15877-2:2009 ( Ed. 2 )Plastics piping systems for hot and cold water installationsChlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes(ISO 15877-2:2009)TC 155EN ISO 15877-3:2009 ( Ed. 2 )Plastics piping systems for hot and cold water installationsChlorinated poly(vinyl chloride) (PVC-C) Part 3: Fittings(ISO 15877-3:2009)TC 155EN ISO 15877-5:2009 ( Ed. 2 )Plastics piping systems for hot and cold water installationsChlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness forpurpose of the system(ISO 15877-5:2009)TC 156EN 15665:2009 ( Ed. 1 )Ventilation for buildings Determining performance criteria forresidential ventilation systemsTC 162EN 13158:2009 ( Ed. 2 )Protective clothing Protective jackets, body and shoulder protectorsfor equestrian use: For horse riders and those working with horses,and for horse drivers Requirements and test methodsTC 162EN 13277-7:2009 ( Ed. 1 )Protective equipment for martial arts Part 7: Additionalrequirements and test methods for hand and foot protectorsTC 164EN 899:2009 ( Ed. 3 )Chemicals used for treatment of water intended for humanconsumption Sulphuric acidTC 164EN 12903:2009 ( Ed. 3 )Products used for the treatment of water intended for humanconsumption Powdered activated carbonTC 164EN 12907:2009 ( Ed. 3 )Products used for treatment of water intended for humanconsumption Pyrolyzed coal materialTC 164EN 12915-1:2009 ( Ed. 2 )Products used for the treatment of water intended for humanconsumption Granular activated carbon Part 1: Virgin granularLista Mensal - Normas p. 10 de 28 15 Abril 2009

activated carbonTC 164EN 12915-2:2009 ( Ed. 2 )Products used for the treatment of water intended for humanconsumption Granular activated carbon Part 2: Reactivated granularactivated carbonTC 164EN 13752:2009 ( Ed. 2 )Products used for treatment of water intended for humanconsumption Manganese dioxideTC 164EN 13753:2009 ( Ed. 2 )Products used for treatment of water intended for humanconsumption Granular activated aluminaTC 164EN 13754:2009 ( Ed. 2 )Products used for treatment of water intended for humanconsumption BentoniteTC 170EN ISO 18369-1:2006 /A 1:2009 ( Ed. 1 )Ophthalmic optics Contact lenses Part 1: Vocabulary, classificationsystem and recommendations for labelling specifications -Amendment 1 (ISO 18369-1:2006/Amd 1:2009)TC 172EN ISO 8254-1:2009 ( Ed. 2 )Paper and board Measurement of specular gloss Part 1: 75 degreegloss with a converging beam, TAPPI method(ISO 8254-1:2009)TC 175EN 975-1:2009 ( Ed. 2 )Sawn timber Appearance grading of hardwoods Part 1: Oak andbeechTC 180EN 416-1:2009 ( Ed. 2 )Single burner gas-fired overhead radiant tube heaters fornondomestic use Part 1: SafetyTC 180EN 777-1:2009 ( Ed. 2 )Multi-burner gas-fired overhead radiant tube heater systems fornon-domestic use Part 1: System D - SafetyTC 180EN 777-2:2009 ( Ed. 2 )Multi-burner gas-fired overhead radiant tube heater systems fornon-domestic use Part 2: System E - SafetyTC 180EN 777-3:2009 ( Ed. 2 )Multi-burner gas-fired overhead radiant tube heater systems for nondomestic use Part 3: System F - SafetyTC 180EN 777-4:2009 ( Ed. 2 )Multi-burner gas-fired overhead radiant tube heater systems fornon-domestic use Part 4: System H - SafetyTC 185EN 14399-9:2009 ( Ed. 1 )High-strength structural bolting assemblies for preloading Part 9:System HR or HV - Direct tension indicators for bolt and nutassembliesTC 185EN 14399-10:2009 ( Ed. 1 )High-strength structural bolting assemblies for preloading Part 10:System HRC - Bolt and nut assemblies with calibrated preloadTC 190EN ISO 8062-3:2007 /AC :2009 ( Ed. 1 )Geometrical Product Specifications (GPS) Dimensional andgeometrical tolerances for moulded parts Part 3: Generaldimensional and geometrical tolerances and machining allowancesfor castings(ISO 8062-3:2007/Cor 1:2009)TC 191EN 671-3:2009 ( Ed. 2 )Fixed firefighting systems Hose systems Part 3: Maintenance of hosereels with semi-rigid hose and hose systems with lay-flat hoseTC 192EN 1777-:2004+A1:2009 ( Ed. 1 )Hydraulic platforms (HPs) for fire fighting and rescue servicesSafety requirements and testingTC 192EN 1846-2:2001+A3:2009 ( Ed. 1 )Firefighting and rescue service vehicles Part 2: Commonrequirements Safety and performanceTC 192EN 14043-:2005+A1:2009 ( Ed. 1 )High rise aerial appliances for fire service use Turntable ladderswith combined movements Safety and performance requirementsand test methodsTC 192EN 14044-:2005+A1:2009 ( Ed. 1 )High rise aerial appliances for fire service use Turntable ladderswith sequential movements Safety and performance requirementsand test methodsTC 193EN 1465:2009 ( Ed. 2 )Adhesives Determination of tensile lap-shear strength of bondedassembliesTC 193EN 1966:2009 ( Ed. 2 )Structural adhesives Characterization of a surface by measuringadhesion by means of the three point bending methodTC 194EN 13834-:2007+A1:2009 ( Ed. 1 )Cookware Ovenware for use in traditional domestic ovensTC 203EN 969:2009 ( Ed. 2 )Ductile iron pipes, fittings, accessories and their joints for gaspipelines Requirements and test methodsTC 207EN 12720:2009 ( Ed. 2 )Furniture Assessment of surface resistance to cold liquidsTC 207EN 12721:2009 ( Ed. 2 )Furniture Assessment of surface resistance to wet heatTC 207EN 12722:2009 ( Ed. 2 )Furniture Assessment of surface resistance to dry heatTC 211EN ISO 10846-5:2009 ( Ed. 1 )Acoustics and vibration Laboratory measurement of vibroacoustictransfer properties of resilient elements Part 5: Driving pointmethod for determination of the low-frequency transfer stiffness ofresilient supports for translatory motion (ISO 10846-5:2008)TC 211EN ISO 11689:1996 /AC :2009 ( Ed. 1 )Lista Mensal - Normas p. 11 de 28 15 Abril 2009

Acoustics Procedure for the comparison of noise-emission data formachinery and equipment(ISO 11689:1996/Cor 1:2007)TC 215EN ISO 8835-3:2009 ( Ed. 2 )Inhalational anaesthesia systems Part 3: Transfer and receivingsystems of active anaesthetic gas scavenging systems(ISO 8835-3:2007)TC 215EN ISO 8835-5:2009 ( Ed. 2 )Inhalational anaesthesia systems Part 5: Anaesthetic ventilators(ISO 8835-5:2004)TC 215EN ISO 10079-1:2009 ( Ed. 3 )Medical suction equipment Part 1: Electrically powered suctionequipment - Safety requirements(ISO 10079-1:1999)TC 215EN ISO 10079-2:2009 ( Ed. 3 )Medical suction equipment Part 2: Manually powered suctionequipment(ISO 10079-2:1999)TC 215EN ISO 10079-3:2009 ( Ed. 3 )Medical suction equipment Part 3: Suction equipment powered froma vacuum or pressure source(ISO 10079-3:1999)TC 215EN ISO 17510-1:2009 ( Ed. 3 )Sleep apnoea breathing therapy Part 1: Sleep apnoea breathingtherapy equipment(ISO 17510-1:2007)TC 215EN ISO 17510-2:2009 ( Ed. 3 )Sleep apnoea breathing therapy Part 2: Masks and applicationaccessories(ISO 17510-2:2007)TC 215EN ISO 18777:2009 ( Ed. 2 )Transportable liquid oxygen systems for medical use Particularrequirements (ISO 18777:2005)TC 215EN ISO 23328-2:2009 ( Ed. 2 )Breathing system filters for anaesthetic and respiratory usePart 2: Non-filtration aspects (ISO 23328-2:2002)TC 215EN ISO 23747:2009 ( Ed. 2 )Anaesthetic and respiratory equipment Peak expiratory flow metersfor the assessment of pulmonary function in spontaneouslybreathing humans(ISO 23747:2007)TC 229EN 1168-:2005+A2:2009 ( Ed. 1 )Precast concrete products Hollow core slabsTC 230EN ISO 22032:2009 ( Ed. 1 )Water quality Determination of selected polybrominated diphenylethers in sediment and sewage sludge Method using extraction andgas chromatography/mass spectrometry(ISO 22032:2006)TC 235EN 14382-:2006+A1:2009 ( Ed. 1 )Safety devices for gas pressure regulating stations and installationsGas safety shut-off devices for inlet pressures up to 100 barTC 238EN 437-;2003+A1:2009 ( Ed. 1 )Test gases Test pressures Appliance categoriesTC 248EN 15618:2009 ( Ed. 1 )Rubber- or plastic-coated fabrics Upholstery fabrics Classificationand methods of testTC 248EN ISO 16663-1:2009 ( Ed. 2 )Fishing nets Method of test for the determination of mesh sizePart 1: Opening of mesh (ISO 16663-1:2009)TC 248EN ISO 23606:2009 ( Ed. 1 )Textiles Knitted fabrics Representation and pattern design(ISO 23606:2009)TC 249EN 15701:2009 ( Ed. 1 )Plastics Thermoplastic jackets for insulation products for buildingequipment and industrial installations Requirements and testmethodsTC 249EN ISO 14896:2009 ( Ed. 2 )Plastics Polyurethane raw materials Determination of isocyanatecontent(ISO 14896:2009)TC 250EN 1991-1-1:2002 /AC :2009 ( Ed. 1 )Eurocode 1: Actions on structures Part 1-1: General actions -Densities, self-weight, imposed loads for buildingsTC 250EN 1991-1-2:2002 /AC :2009 ( Ed. 1 )Eurocode 1: Actions on structures Part 1-2: General actions –Actions on structures exposed to fireTC 250EN 1991-1-3:2003 /AC :2009 ( Ed. 1 )Eurocode 1 - Actions on structures Part 1-3: General actions - SnowloadsTC 250EN 1991-1-5:2003 /AC :2009 ( Ed. 1 )Eurocode 1: Actions on structures Part 1-5: General actions -Thermal actionsTC 250EN 1993-1-2:2005 /AC :2009 ( Ed. 2 )Eurocode 3: Design of steel structures Part 1-2: General rules -Structural fire designTC 250EN 1995-1-2:2004 /AC :2009 ( Ed. 2 )Eurocode 5: Design of timber structures Part 1-2: General -Structural fire designTC 250EN 1997-1:2004 /AC :2009 ( Ed. 1 )Eurocode 7: Geotechnical design Part 1: General rulesTC 250EN 1998-2:2005 /A 1:2009 ( Ed. 1 )Eurocode 8: Design of structures for earthquake resistance Part 2:BridgesTC 252EN 12790:2009 ( Ed. 2 )Child use and care articles Reclined cradlesLista Mensal - Normas p. 12 de 28 15 Abril 2009

TC 256EN 13103:2009 ( Ed. 2 )Railway applications Wheelsets and bogies Non-powered axles -Design guideTC 256EN 13104:2009 ( Ed. 2 )Railway applications Wheelsets and bogies Powered axles - DesignmethodTC 256EN 13260:2009 ( Ed. 2 )Railway applications Wheelsets and bogies Wheelsets - ProductrequirementsTC 256EN 14865-1:2009 ( Ed. 1 )Railway Applications Axlebox lubricating greases Part 1: Method totest the ability to lubricateTC 256EN 15551:2009 ( Ed. 1 )Railway applications Railway rolling stock BuffersTC 256EN 15595:2009 ( Ed. 1 )Railway applications Braking Wheel slide protectionTC 262EN 15646:2009 ( Ed. 1 )Electrodeposited coatings Electroplated coatings of aluminium andaluminium alloys with supplementary treatment Requirements andtest methodsTC 264EN 15267-1:2009 ( Ed. 1 )Air quality Certification of automated measuring systems Part 1:General principlesTC 264EN 15267-2:2009 ( Ed. 1 )Air quality Certification of automated measuring systems Part 2:Initial assessment of the AMS manufacturer's quality managementsystem and post certification surveillance for the manufacturingprocessTC 270EN ISO 11102-2:2009 ( Ed. 2 )Reciprocating internal combustion engines Handle startingequipment Part 2: Method of testing the angle of disengagement(ISO 11102-2:1997)TC 276EN ISO 2870:2009 ( Ed. 2 )Surface active agents Detergents Determination of anionicactivematter hydrolysable and non-hydrolysable under acid conditions(ISO 2870:2009)TC 276EN ISO 8799:2009 ( Ed. 2 )Surface active agents Sulfated ethoxylated alcohols andalkylphenols Determination of content of unsulfated matter(ISO 8799:2009)TC 278CEN/TS 15722:2009 ( Ed. 1 )Road transport and traffic telematics ESafety ECall minimum setof data (MSD)TC 278EN ISO 15008:2009 ( Ed. 2 )Road vehicles Ergonomic aspects of transport information andcontrol systems Specifications and test procedures for invehiclevisual presentation(ISO 15008:2009)TC 287EN ISO 19136:2009 ( Ed. 1 )Geographic information Geography Markup Language (GML)(ISO 19136:2007)TC 290EN ISO 463:2006 /AC :2009 ( Ed. 2 )Geometrical Product Specifications (GPS) Dimensional measuringequipment Design and metrological characteristics of mechanicaldial gauges(ISO 463:2006/Cor 1:2007/Cor 2:2009)TC 298EN ISO 1248:2008 /AC :2009 ( Ed. 1 )Iron oxide pigments Specifications and methods of test (ISO1248:2006 including Technical Corrigendum 1:2007 and Cor2:2008)TC 327EN 15741:2009 ( Ed. 1 )Animal feeding stuffs Determination of OC-pesticides and PCB'sby GC/MSTC 327EN 15742:2009 ( Ed. 1 )Animal feeding stuffs Determination of OC-pesticides and PCB'sby GC/ECDTC 332EN ISO 8655-1:2002 /AC :2009 ( Ed. 1 )Piston-operated volumetric apparatus Part 1: Terminology, generalrequirements and user recommendations (ISO 8655-1 :2002/Cor1:2008)TC 332EN ISO 8655-2:2002 /AC :2009 ( Ed. 1 )Piston-operated volumetric apparatus Part 2: Piston pipettes (ISO8655-2:2002/Cor 1:2008)TC 332EN ISO 8655-3:2002 /AC :2009 ( Ed. 1 )Piston-operated volumetric apparatus Part 3: Piston burettes (ISO8655-3:2002/Cor 1:2008)TC 332EN ISO 8655-4:2002 /AC :2009 ( Ed. 1 )Piston-operated volumetric apparatus Part 4: Dilutors (ISO8655-4:2002/Cor 1:2008)TC 332EN ISO 8655-5:2002 /AC :2009 ( Ed. 1 )Piston-operated volumetric apparatus Part 5: Dispensers (ISO8655-5:2002/Cor 1:2008)TC 332EN ISO 8655-6:2002 /AC :2009 ( Ed. 1 )Piston-operated volumetric apparatus Part 6: Gravimetric methodsfor the determination of measurement error(ISO 8655-6:2002/Cor 1:2008)TC 332EN ISO 8655-7:2005 /AC :2009 ( Ed. 1 )Piston-operated volumetric apparatus Part 7: Non-gravimetricmethods for the assessment of equipment performance(ISO 8655-7:2005/Cor 1:2008)TC 332EN ISO 15212-1:1999 /AC :2009 ( Ed. 1 )Oscillation-type density meters Part 1: Laboratory instruments(ISO 15212-1:199B/Cor 1:200B)Lista Mensal - Normas p. 13 de 28 15 Abril 2009

TC 332EN ISO 15212-2:2002 /AC :2009 ( Ed. 1 )Oscillation-type density meters Part 2: Process instruments forhomogeneous liquids(ISO 15212-2:2002/Cor 1:2008TC 333EN 15532:2008 /AC :2009 ( Ed. 1 )Cycles TerminologyTC 336EN 1429:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of residue on sievingof bituminous emulsions, and determination of storage stability bysievingTC 336EN 1430:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of particle polarityof bituminous emulsionsTC 336EN 1431:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of residual binderand oil distillate from bitumen emulsions by distillationTC 336EN 13075-1:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of breakingbehaviourPart 1: Determination of breaking value of cationic bituminousemulsions, mineral filler methodTC 336EN 13075-2:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of breakingbehaviour Part 2: Determination of fines mixing time of cationicbituminous emulsionsTC 336EN 13303:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of the loss in massafter heating of industrial bitumenTC 336EN 13305:2008 ( Ed. 2 )Bitumen and bituminous binders Framework for specification ofhard industrial bitumensTC 336EN 15626:2009 ( Ed. 1 )Bitumen and bituminous binders Determination of adhesivity ofcut-back and fluxed bituminous binders by water immersion testAggregate methodTC 336EN ISO 13304:2009 ( Ed. 2 )Bitumen and bituminous binders Framework for specification ofoxidised bitumensTC 337CEN/TS 15436-3:2009 ( Ed. 1 )Road service area maintenance equipment Part 3: ClassificationTC 338EN ISO 3093:2007 /AC :2009 ( Ed. 1 )Wheat, rye and respective flours, durum wheat and durum wheatsemolina Determination of the Falling Number according toHagberg-Perten(ISO 3093:2004/Cor 1:2008)TC 344EN 15512:2009 ( Ed. 1 )Steel static storage systems Adjustable pallet racking systemsPrinciples for structural designTC 351CEN/TR 15855:2009 ( Ed. 1 )Construction products Assessment of release of dangeroussubstances Barriers to tradeTC CSH10EN ISO 10821:2005 /A 1:2009 ( Ed. 1 )Industrial sewing machines Safety requirements for sewingmachines, units and systems Amendment 1(ISO 10821:2005/Amd 1:2009)TC CSM11EN ISO 3927:2001 /AC :2009 ( Ed. 1 )Metallic powders, excluding powders for hardmetals Determinationof compressibility in uniaxial compression(ISO 3927:2001/Cor 1:2008)TC ECISS/TC23EN 10343:2009 ( Ed. 1 )Steels for quenching and tempering for construction purposesTechnical delivery conditionsTC ECISS/TC27EN 10152:2009 ( Ed. 3 )Electrolytically zinc coated cold rolled steel flat products for coldforming Technical delivery conditionsTC ECISS/TC27EN 10346:2009 ( Ed. 1 )Continuously hot-dip coated steel flat products Technical deliveryconditionsTC ECISS/TC29EN 10208-1:2009 ( Ed. 2 )Steel pipes for pipelines for combustible fluids Technical deliverycondi-tions Part 1: Pipes of requirement class ATC ECISS/TC29EN 10208-2:2009 ( Ed. 2 )Steel pipes for pipelines for combustible fluids Technical deliveryconditions Part 2: Pipes of requirement class BTC ECISS/TC29EN ISO 21809-2:2007 /AC :2009 ( Ed. 1 )Petroleum and natural gas industries External coatings for buriedor submerged pipelines used in pipeline transportation systemsPart 2: Fusion-bonded epoxy coatings(ISO 21809-2:2007/Cor 1:2008)TC AECMAEN 2115:2009 ( Ed. 1 )Aerospace series Aluminium alloy 2117-T42 Wire for solid rivets- D

Aerospace series Steel FE-PL2102 (34NiCr6) 900 MPa

EN 3475-811:2009 ( Ed. 1 )Aerospace series Cables, electrical, aircraft use - Test methodsPart 811: Unbalance attenuationTC AECMAEN 3660-017:2009 ( Ed. 1 )Aerospace series Cable outlet accessories for circular and rectangularelectrical and optical connectors Part 017: Cable outlet, style A,straight, unsealed, with cable tie strain relief - Product standardTC AECMAEN 3660-018:2009 ( Ed. 1 )Aerospace series Cable outlet accessories for circular and rectangularelectrical and optical connectors Part 018: Cable outlet, style A, 90°,unsealed, with cable tie strain relief - Product standardTC AECMAEN 3660-019:2009 ( Ed. 1 )Aerospace series Cable outlet accessories for circular and rectangularelectrical and optical connectors Part 019: Cable outlet, style A, 45°,unsealed, with cable tie strain relief - Product standardTC AECMAEN 3660-025:2009 ( Ed. 1 )Aerospace series Cable outlet accessories for circular and rectangularelectrical and optical connectors Part 025: Cable outlet, style A,straight, unsealed, with cable tie strain relief for EN 3646 - ProductstandardTC AECMAEN 3660-026:2009 ( Ed. 1 )Aerospace series Cable outlet accessories for circular and rectangularelectrical and optical connectors Part 026: Cable outlet, style A ,90°, unsealed, with cable tie strain relief for EN 3646 - ProductstandardTC AECMAEN 3660-027:2009 ( Ed. 1 )Aerospace series Cable outlet accessories for circular and rectangularelectrical and optical connectors Part 027: Cable outlet, style A ,45°, unsealed, with cable tie strain relief for EN 3646 - ProductstandardTC AECMAEN 3745-514:2009 ( Ed. 1 )Aerospace series Fibres and cables, optical, aircraft use - Testmethods Part 514: Cable twist bendTC AECMAEN 4301:2009 ( Ed. 1 )Aerospace series Identification marking methods for engine itemsEngineering requirementsTC AECMAEN 4372:2009 ( Ed. 1 )Aerospace series Heat resisting nickel alloy with copper NI-PD9001(NiCu31) Wire for solid rivets - D

2.2 CENELECNormas Europeias aprovadas na área electrotécnica pelo Comité Europeu de Normalização Electrotécnica (CENELEC)Para cada referência, menciona-se o Comité Técnico, a designação codificada e o título.SC 31-1EN 60079-10-1:2009 ( Ed. 1 )Explosive atmospheres Part 10-1: Classification of areas -Explosive gas atmospheres(IEC 60079-10-1:2008)SR 40EN 60286-5:2004 /A 1:2009 ( Ed. 2 )Packaging of components for automatic handling Part 5: Matrixtrays(IEC 60286-5:2004/A1:2009)SR 46FEN 61169-38:2009 ( Ed. 1 )Radio-frequency connectors Part 38: Sectional specification --Radio frequency coaxial connectors model, slide-in (rack and panelapplications) - Characteristic impedance 50 O (type TMA) - 50 Oapplications(IEC 61169-38:2008)SR 49EN 60689:2009 ( Ed. 1 )Measurement and test methods for tunig fork quartz crystal units inthe range from 10 kHz to 200 kHz and standard values(IEC 60689:2008)SR 85EN 61557-9:2009 ( Ed. 2 )Electrical safety in low voltage distribution systems up to 1 000 Vac and 1 500 V dc - Equipment for testing, measuring or monitoringof protective measures Part 9: Equipment for insulation faultlocation in ITsystems(IEC 61557-9:2009)SR 85EN 61557-11:2009 ( Ed. 1 )Electrical safety in low voltage distribution systems up to 1 000 va.c. and 1 500 v d.c. - Equipment for testing, measuring ormonitoring of protective measures Part 11: Effectiveness ofresidual current monitors RCMS) type A and type B in TT, TN andIT systems(IEC 61557-11:2009)SR 86CEN 62007-2:2009 ( Ed. 2 )Semiconductor optoelectronic devices for fibre optic systemapplications Part 2: Measuring methods(IEC 62007-2:2009)SR 91EN 61249-2-35:2009 ( Ed. 1 )Materials for printed boards and other interconnecting structuresPart 2-35: Reinforced base materials, clad and unclad - Modifiedepoxide woven E-glass laminate sheets of defined flammability(vertical burning test), copper-clad for lead-free assembly(IEC 61249-2-35:2008)SR 91EN 61249-2-36:2009 ( Ed. 1 )Materials for printed boards and other interconnecting structuresPart 2-36: Reinforced base materials, clad and unclad - Epoxidewoven E-glass laminated sheet of defined flammability (verticalburning test), copper-clad for lead-free assembly(IEC 61249-2-36:2008)SR 91EN 61249-2-37:2009 ( Ed. 1 )Materials for printed boards and other interconnecting structuresPart 2-37: Reinforced base materials, clad and unclad - Modifiednon-halogenated epoxide woven E-glass laminate sheets of definedflammability (vertical burning test), copper-clad for lead-freeassembly(IEC 61249-2-37:2008)SR 91EN 61249-2-38:2009 ( Ed. 1 )Materials for printed boards and other interconnecting structuresPart 2-38: Reinforced base materials, clad and unclad -Non-halogenated epoxide woven E-glass laminate sheets of definedflammability (vertical burning test), copper-clad for lead-freeassembly(IEC 61249-2-38:2008)TC 2EN 60034-30:2009 ( Ed. 1 )Rotating electrical machines Part 30: Efficiency classes ofsingle-speed, three-phase, cage-induction motors (IE-code)(IEC 6034-30:2008)TC 11EN 50341-3:2001 /CORRIGENDUM Fev:2009 ( Ed. 1 )Overhead electrical lines exceeding AC 45 kV Part 3: Set ofNational Normative AspectsTC 11EN 50423-3:2005 /CORRIGENDUM Fev:2009 ( Ed. 1 )Overhead electrical lines exceeding AC 1 kV up to and including AC45 kV Part 3: Set of National Normative AspectsTC 14EN 50216-9:2009 ( Ed. 1 )Power transformer and reactor fittings Part 9: Oil-to-water heatexchangersTC 14EN 50216-10:2009 ( Ed. 1 )Power transformer and reactor fittings Part 10: Oil-to-air heatexchangersTC 17BEN 61095:2009 ( Ed. 2 )Electromechanical contactors for household and similar purposes(IEC 61095:2009)TC 20EN 50143:2009 ( Ed. 2 )Cables for signs and luminous-discharge-tube installationsoperating from a no-load rated output voltage exceeding 1 000 Vbut not exceeding 10 000 VTC 26AEN 60974-8:2009 ( Ed. 2 )Arc welding equipment Part 8: Gas consoles for welding and plasmacutting systems(IEC 60974-8:2009)Lista Mensal - Normas p. 17 de 28 15 Abril 2009

TC 61EN 60335-2-31:2003 /A 2:2009 ( Ed. 3 )Household and similar electrical appliances - Safety Part 2-31:Particular requirements for range hoods and other cooking fumeextractors(IEC 60335-2-31:2002/A2:2008)TC 61EN 60335-2-40:2003 /A 2:2009 ( Ed. 3 )Household and similar electrical appliances - Safety Part 2-40:Particular requirements for electrical heat pumps, air-conditionersand dehumidifiers(IEC 60335-2-40:2002/A2:2005, modif)TC 61EN 60335-2-80:2003 /A 2:2009 ( Ed. 2 )Household and similar electrical appliances - Safety Part 2-80:Particular requirements for fans(IEC 60335-2-80:2002/A2:2008)TC 61EN 61558-1:2005 /A 1:2009 ( Ed. 2 )Safety of power transformers, power supplies, reactors and similarproducts Part 1: General requirements and tests(IEC 61558-1:2005/A1:2009)TC 79CLC/TS 50131-2-7-1:2009 ( Ed. 1 )Alarm systems - Intrusion and hold-up systems Part 2-7-1: Intrusiondetectors - Glass break detectors (acoustics)TC 79CLC/TS 50131-2-7-2:2009 ( Ed. 1 )Alarm systems - Intrusion and hold-up systems Part 2-7-2: Intrusiondetectors - Glass break detectors (passive)TC 79CLC/TS 50131-2-7-3:2009 ( Ed. 1 )Alarm systems - Intrusion and hold-up systems Part 2-7-3: Intrusiondetectors - Glass break detectors (active)TC 79CLC/TS 50398:2009 ( Ed. 2 )Alarm systems - Combined and integrated alarm-systems - GeneralrequirementsTC 79EN 50131-1:2006 /A IS1:2009 ( Ed. 2 )Alarm systems - Intrusion and hold-up systems Part 1: SystemrequirementsTC 79EN 50131-3:2009 ( Ed. 1 )Alarm systems - Intrusion and hold-up systems Part 3: Control andindicating equipmentTC 82EN 50513:2009 ( Ed. 1 )Solar wafers - Data sheet and product information for cystallinesilicone wafers for solar cell manufacturingTC 82EN 60904-7:2009 ( Ed. 2 )Photovoltaic devices Part 7: Computation of the spectral mismatchcorrection for measurements of photovoltaic devices(IEC 60904-7:2008)TC 86BXAEN 61300-2-2:2009 ( Ed. 3 )Fibre optic interconnecting devices and passive components - Basictest and measurement procedures Part 2-2: Tests - Mating durability(IEC 61300-2-2:2009)TC 86BXAEN 61300-3-2:2009 ( Ed. 3 )Fibre optic interconnecting devices and passive components - Basictests and measurement procedures Part 3-2:Examinations andmeasurements - Polarization dependent loss in a single-mode fibreoptic devices(IEC 61300-3-2:2009)TC 86BXAEN 61300-3-34:2009 ( Ed. 3 )Fibre optic interconnecting devices and passive components -Basic test and measurement procedures Part 3-34: Examinationsand measurements - Attenuation of random mated connectors(IEC 61300-3-34:2009)TC 86BXAEN 61754-25:2009 ( Ed. 1 )Fibre optic connector interfaces Part 25:Type RAO connectorfamily(IEC 61754-25:2008)TC 86BXAEN 61755-3-1:2009 ( Ed. 1 )Fibre optic connector optical interfaces Part 3-1: Optical interface,2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule,single mode fibre(IEC 61755-3-1:2006, modif + corrigendum Jan 2009)TC 86BXAEN 61755-3-2:2009 ( Ed. 1 )Fibre optic connector optical interfaces Part 3-2: Opticalinterface, 2,5 mm and 1,25 mm diameter cylindrical full zirconiaferrules for 8 degrees angled-PC single mode fibres(IEC 61755-3-2:2006, modif + corrigendum Jan 2009)TC 86BXAEN 61755-3-8:2009 ( Ed. 1 )Fibre optic interconnecting devices and passive components - Fibreoptical connector optical interfaces Part 3-8 Optical interface,2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APCcomposite ferrule using titanium as fibre surrounding material,single mode fibre(IEC 61755-3-8:2009)TC 106XEN 62369-1:2009 ( Ed. 1 )Evaluation of human exposure to electromagnetic fields from shortrange devices (SRDs) in various applications over the frequencyrange 0 GHz to 300 GHz Part 1: Fields produced by devices used forelectronic article surveillance, radio frequency identification andsimilar systems(IEC 62369-1:2008)TC 108XEN 60950-1:2006 /A 11:2009 ( Ed. 5 )Information technology equipment - Safety Part 1: GeneralrequirementsTC 210EN 55015:2006 /A 2:2009 ( Ed. 5 )Limits and methods of measurement of radio disturbancecharacteristics of electrical lighting and similar equipment(CISPR 15:2005/A2:2008)TC 210EN 55016-2-1:2009 ( Ed. 2 )Specification for radio disturbance and immunity measuringapparatus and methods Part 2-1: Methods of measurement ofdisturbances and immunity - Conducted disturbance measurements(CISPR 16-2-1:2008)TC 210EN 61000-4-3:2006 /A IS1:2009 ( Ed. 1 )Electromagnetic compatibility (EMC) Part 4-3: Testing andmeasurement techniques - Radiated, radio-frequency,electromagneticfield immunity test - Interpretation of Clausure 5Lista Mensal - Normas p. 18 de 28 15 Abril 2009

TC 210EN 61000-4-6:2007 /A IS1:2009 ( Ed. 1 )Electromagnetic compatibility (EMC) Part 4-6: Testing andmeasurement techniques - Immunity to conducted disturbances,induced by radio-frequency fields - Interpretation of Clause 5Lista Mensal - Normas p. 19 de 28 15 Abril 2009

2.3 CEN/CENELECNormas Europeias aprovadas pelo Comité Europeu de Normalização (CEN) / Comité Europeu de NormalizaçãoElectrotécnica (CENELEC)Para cada referência, menciona-se a designação codificada e o título.LISTA VAZIALista Mensal - Normas p. 20 de 28 15 Abril 2009

2.4 ETSINormas Europeias aprovadas e publicadas no sector das Telecomunicações pelo Instituto Europeu de Normalizaçãopara as Telecomunicações (ETSI)Para cada referência, menciona-se a designação codificada e o título.TC ETSIEN 300201:2001 ( V1.2.1 )Integrated Services Digital Network (ISDN);Call Forwarding NoReply (CFNR) supplementary service;Service descriptionTC ETSIEN 300328:2006 ( V1.7.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Wideband transmission systems; Data transmission equipmentoperating in the 2,4 GHz ISM band and using wide band modulationtechniques; Harmonized EN covering essential requirements underarticle 3.2 of the R&TTE DirectiveTC ETSIEN 300328-1:2001 ( V1.3.1 )Electromagnetic compatibility and Radio spectrum Matters(ERM);Wideband Transmission systems;Data transmissionequipment operating in the 2,4 GHz ISM band and using spreadspectrum modulation techniques Part 1: Technical characteristics andtest conditionsTC ETSIEN 300328-2:2001 ( V1.2.1 )Electromagnetic compatibility and Radio spectrum Matters(ERM);Wideband Transmission systems;Data transmissionequipment operating in the 2,4 GHz ISM band and using spreadspectrum modulation techniques Part 2: Harmonized EN coveringessential requirements under article 3.2 of the R&TTE DirectiveTC ETSIEN 300330:1999 ( V1.2.2 )ElectroMagnetic Compatibility and Radio Spectrum Matters(ERM);Short Range Devices (SRD);Technical characteristics andtest methods for radio equipment in the frequency range 9 kHz to25 MHz and inductive loop systems in the frequency range 9 kHzto 30 MHzTC ETSIEN 300440-1:2009 ( V1.5.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Short range devices; Radio equipment to be used in the 1 GHz to 40GHz frequency range Part 1: Technical characteristics and testmethodsTC ETSIEN 300440-2:2009 ( V1.3.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Short range devices; Radio equipment to be used in the 1 GHz to 40GHz frequency range Part 2: Harmonized EN covering essentialrequirements of article 3.2 of the R&TTE DirectiveTC ETSIEN 302567:2009 ( V1.1.1 )Broadband Radio Access Networks (BRAN); 60 GHzMultiple-Gigabit WAS/RLAN Systems; Harmonized EN coveringthe essential requirements of article 3.2 of the R&TTE DirectiveTC ETSIETS 300202:1994 /A 1:1996 ( Ed. 1 )Integrated Services Digital Network (ISDN);Call Deflection (CD)supplementary service;Service descriptionTC ETSIETS 300203:1994 ( Ed. 1 )Integrated Services Digital Network (ISDN);Call Forwarding Busy(CFB) supplementary service;Functional capabilities andinformation flowsTC ETSIETS 300296:1994 ( Ed. 1 )Radio Equipment and Systems (RES); Land mobile service;Technical characteristics and test conditions for radio equipmentusing integral antennas intended primarily for analogue speechTC ETSIETS 300296:1994 /A 1:1997 ( Ed. 1 )Radio Equipment and Systems (RES); Land mobile service;Technical characteristics and test conditions for radio equipmentusing integral antennas intended primarily for analogue speechTC ETSIETS 300330:1994 ( Ed. 1 )Radio Equipment and Systems (RES);Short Range Devices(SRDs);Technical characteristics and test methods for radioequipment in the frequency range 9 kHz to 25 MHz and inductiveloop systems in the frequency range 9 kHz to 30 MHzTC ETSIETS 300330:1994 /A 1:1997 ( Ed. 1 )Radio Equipment and Systems (RES);Short Range Devices(SRDs);Technical characteristics and test methods for radioequipment in the frequency range 9 kHz to 25 MHz and inductiveloop systems in the frequency range 9 kHz to 30 MHzTC ETSIETS 300753:1997 ( Ed. 1 )Equipment Engineering (EE); Acoustic noise emitted bytelecommunications equipmentTC ETSIEN 300468:2009 ( V1.9.1 )Digital Video Broadcasting (DVB); Specification for ServiceInformation (SI) in DVB systemsTC ETSIEN 302544-1:2009 ( V1.1.1 )Broadband Data Transmission Systems operating in the 2 500 MHzto 2 690 MHz frequency band Part 1: TDD Base Stations;HarmonizedEN covering the essential requirements of article 3.2 of the R&TTEDirectiveLista Mensal - Normas p. 21 de 28 15 Abril 2009

3. Normas Internacionais publicadasNormas Internacionais aprovadas e publicadas pela Comissão Electrotécnica Internacional (IEC) e pela OrganizaçãoInternacional de Normalização (ISO)Para cada referência, menciona-se o Comité Técnico, a designação codificada, a data e o título.IECTC 17BIEC 61095:2009 ( Ed 2.0 )Electromechanical contactors for household and similar purposesTC 22FIEC/PAS 61975:2004 ( Ed 1.0 )System tests for high-voltage direct current (HVDC) installationsTC 32AIEC 60282-1:2005 ( Ed 6.0 )High-voltage fuses Part 1: Current-limiting fusesTC 32AIEC 60282-2:2008 ( Ed 3.0 )High-voltage fuses Part 2: Expulsion fusesTC 46FIEC 61169-24:2009 ( Ed 2.0 )Radio-frequency connectors Part 24: Sectional specification - Radiofrequency coaxial connectors with screw coupling typically for usein 75 ohm cable networks (type F)TC 46FIEC/PAS 61169-18:2009 ( Ed 1.0 )Radio-frequency connectors Part 18: Sectional specification -Radio frequency coaxial connectors of type SSMATC 46FIEC/PAS 61169-19:2009 ( Ed 1.0 )Radio-frequency connectors Part 19: Sectional specification forSSMB series R.F. coaxial connectorsTC 46FIEC/PAS 61169-35:2009 ( Ed 1.0 )Radio-frequency connectors Part 35: Sectional specification - Radiofrequency coaxial connectors of type 2,92TC 86CIEC 61280-2-1:1998 ( Ed 1.0 )Fibre optic communication subsystem basic test procedures Part 2-1:Test procedures for digital systems - Receiver sensitivity andoverload measurementTC 86CIEC 61280-2-4:1998 ( Ed 1.0 )Fibre optic communication subsystem - Basic test procedures Part2-4: Test procedures for digital systems - Bit-rate tolerancemeasurementTC 86CIEC 61280-2-5:1998 ( Ed 1.0 )Fibre optic communication subsystem basic test proceduresTC 86CIEC 61280-2-8:2003 ( Ed 1.0 )Fibre optic communication subsystem test procedures - Digitalsystems Part 2-8: Determination of low BER using Q-factormeasurementsTC 86CIEC 61280-2-9:2009 ( Ed 2.0 )Fibre optic communication subsystem test procedures Part 2-9:Digital systems - Optical signal-to-noise ratio measurement fordense wavelength-division multiplexed systemsTC 86CIEC 61280-2-10:2005 ( Ed 1.0 )Fibre optic communication subsystem test procedures Part 2-10:Digital systems - Time-resolved chirp and alpha-factor measurementof laser transmittersTC 86CIEC 61280-2-11:2006 ( Ed 1.0 )Fibre optic communication subsystem test procedures Part 2-11:Digital systems - Averaged Q-factor determination using amplitudehistogram evaluation for optical signal quality monitoringTC 86BIEC 61300-2-2:2009 ( Ed 3.0 )Fibre optic interconnecting devices and passive components - Basictest and measurement procedures Part 2-2: Tests - Mating durabilityTC 86BIEC 61300-3-2:2009 ( Ed 3.0 )Fibre optic interconnecting devices and passive components - Basictests and measurement procedures Part 3-2:Examinations andmeasurements - Polarization dependent loss in a single-mode fibreoptic devicesTC 86BIEC 61300-3-3:2009 ( Ed 3.0 )Fibre optic interconnecting devices and passive components - Basictest and measurement procedures Part 3-3: Examinations andmeasurements - Active monitoring of changes in attenuation andreturn lossTC 86BIEC 61300-3-6:2008 ( Ed 3.0 )Fibre optic interconnecting devices and passive components -Basic test and measurement procedures Part 3-6: Examinations andmeasurements - Return lossTC 86BIEC 61300-3-7:2009 ( Ed 2.0 )Fibre optic interconnecting devices and passive components -Basic test and measurement procedures Part 3-7: Examinations andmeasurements - Wavelength dependence of attenuation and returnloss of single mode componentsLista Mensal - Normas p. 22 de 28 15 Abril 2009

TC 86BIEC 61300-3-34:2009 ( Ed 3.0 )Fibre optic interconnecting devices and passive components -Basic test and measurement procedures Part 3-34: Examinationsand measurements - Attenuation of random mated connectorsTC 86BIEC 61300-3-43:2009 ( Ed 1.0 )Fibre optic interconnecting devices and passive components -Basic test and measurement procedures Part 3-43: Examinations andmeasurements - Mode transfer function measurement for fibre opticsourcesTC 86BIEC 61754-25:2008 ( Ed 1.0 )Fibre optic connector interfaces Part 25:Type RAO connectorfamilyTC 86BIEC 61755-1:2005 ( Ed 1.0 )Fibre optic connector optical interfaces Part 1: Optical interfacesfor single mode non-dispersion shifted fibres - General and guidanceTC 86BIEC 61755-3-1:2006 ( Ed 1.0 )Fibre optic connector optical interfaces Part 3-1: Optical interface,2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule,single mode fibreTC 86BIEC 61755-3-1:2006 /CORRIGENDUM Jan:2009 ( Ed 1.0Fibre optic connector optical interfaces Part 3-1: Optical interface,2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule,single mode fibreTC 86BIEC 61755-3-2:2006 ( Ed 1.0 )Fibre optic connector optical interfaces Part 3-2: Opticalinterface, 2,5 mm and 1,25 mm diameter cylindrical full zirconiaferrules for 8 degrees angled-PC single mode fibresTC 86BIEC 61755-3-2:2006 /CORRIGENDUM Jan:2009 ( Ed 1.0Fibre optic connector optical interfaces Part 3-2: Opticalinterface, 2,5 mm and 1,25 mm diameter cylindrical full zirconiaferrules for 8 degrees angled-PC single mode fibresTC 86BIEC 61755-3-7:2009 ( Ed 1.0 )Fibre optic interconnecting devices and passive components - Fibreoptical connector optical interfaces Part 3-7: Optical interface,2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule usingtitanium as fibre surrounding material, single modeTC 86BIEC 61755-3-8:2009 ( Ed 1.0 )Fibre optic interconnecting devices and passive components - Fibreoptical connector optical interfaces Part 3-8 Optical interface,2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APCcomposite ferrule using titanium as fibre surrounding material,single mode fibreTC 86CIEC 62007-1:2008 ( Ed 2.0 )Semiconductor optoelectronic devices for fibre optic systemapplications Part 1: Specification template for essential ratings andcharacteristicsTC 86CIEC 62007-2:2009 ( Ed 2.0 )Semiconductor optoelectronic devices for fibre optic systemapplications Part 2: Measuring methodsTC 86BIEC/PAS 61300-3-38:2007 ( Ed 1.0 )Fibre optic interconnecting devices and passive components - Basictest and measurement procedures Part 3-38: Group delay andchromatic dispersionTC 86BIEC/PAS 61755-3-31:2007 ( Ed 1.0 )Fibre optic connector optical interfaces Part 3-31: Optical interface- 8 degrees angled PC end-face PPS rectangular ferrule, single modefibreTC 86BIEC/PAS 61755-3-32:2007 ( Ed 1.0 )Fibre optic connector optical interfaces Part 3-32: Optical interface- 8 degrees angled-PC end-faceTC CISPR/ICISPR 22:2008 ( Ed 6.0 )Information technology equipment - Radio disturbancecharacteristics - Limits and methods of measurementTC 5IEC 60045-1:1991 ( Ed 1.0 )Steam turbines Part 1: SpecificationsTC 8IEC 60196:1965 ( Ed 1.0 )IEC standard frequenciesTC 9IEC 62236-1:2008 ( Ed 2.0 )Railway applications - Electromagnetic compatibility Part 1:GeneralTC 9IEC 62236-2:2008 ( Ed 2.0 )Railway applications - Electromagnetic compatibility Part 2:Emission of the whole railway system to the outside worldTC 9IEC 62236-3-1:2008 ( Ed 2.0 )Railway applications - Electromagnetic compatibility Part 3-1:Rolling stock - Train and complete vehicleTC 9IEC 62236-3-2:2008 ( Ed 2.0 )Railway applications - Electromagnetic compatibility Part 3-2:Rolling stock - ApparatusTC 9IEC 62236-4:2008 ( Ed 2.0 )Railway applications - Electromagnetic compatibility Part 4:Emission and immunity of the signalling and telecommunicationsapparatusTC 9IEC 62236-5:2008 ( Ed 2.0 )Railway applications - Electromagnetic compatibility Part 5:Emission and immunity of fixed power supply installations andapparatusTC 23IEC 62080:2001 ( Ed 1.0 )Sound signalling devices for household and similar purposesTC 23IEC 62080:2001 /A 1:2008 ( Ed 1.0 )Sound signalling devices for household and similar purposesTC 26IEC 60974-8:2009 ( Ed 2.0 )Arc welding equipment Part 8: Gas consoles for welding and plasmacutting systemsTC 38IEC 60044-1:1996 ( Ed 1.0 )Lista Mensal - Normas p. 23 de 28 15 Abril 2009

Instrument transformers Part 1: Current transformersTC 38IEC 60044-1:1996 /A 1:2000 ( Ed 1.0 )Instrument transformers Part 1: Current transformersTC 38IEC 60044-1:1996 /A 2:2002 ( Ed 1 )Instrument transformers Part 2: Current transformersTC 38IEC 60044-2:1997 ( Ed 1.0 )Instrument transformers Part 2: Inductive voltage transformersTC 38IEC 60044-2:1997 /A 1:2000 ( Ed 1.0 )Instrument transformers Part 2: Inductive voltage transformersTC 38IEC 60044-2:1997 /A 2:2002 ( Ed 1.0 )Instrument transformers Part 2: Inductive voltage transformersTC 38IEC 60044-3:2002 ( Ed 2.0 )Instrument transformers Part 3: Combined transformersTC 38IEC 60044-5:2004 ( Ed 1.0 )Instrument transformers Part 5: Capacitor voltage transformersTC 38IEC 60044-6:1992 ( Ed 1.0 )Instrument transformers Part 6: Requirements for protective currenttransformers for transient performanceTC 38IEC 60044-7:1999 ( Ed 1.0 )Instrument transformers Part 7: Electronic voltage transformersTC 38IEC 60044-8:2002 ( Ed 1.0 )Instrument transformers Part 8: Electronic current transformersTC 40IEC 60286-5:2003 /A 1:2009 ( Ed 2.0 )Packaging of components for automatic handling Part 5: MatrixtraysTC 44IEC 60204-1:2005 ( Ed 5.0 )Safety of machinery - Electrical equipment of machines Part 1:General requirementsTC 44IEC 60204-1:2005 /A 1:2008 ( Ed 5.0 )Safety of machinery - Electrical equipment of machines Part 1:General requirementsTC 49IEC/TS 61994-4-2:2003 ( Ed 1.0 )Piezoelectric and dielectric devices for frequency control andselection - Glossary Part 4-2: Piezoelectric and dielectric materials -Piezoelectric ceramicsTC 64IEC 60364-4-42:2001 ( Ed 2.0 )Electrical installations of buildings Part 4-42: Protection for safety -Protection against thermal effectsTC 69IEC 61851-1:2001 ( Ed 1.0 )Electric vehicle conductive charging system Part 1: GeneralrequirementsTC 69IEC 61851-21:2001 ( Ed 1.0 )Electric vehicle conductive charging system Part 21: Electricvehicle requirements for conductive connection to an a.c/d.c. supplyTC 69IEC 61851-22:2001 ( Ed 1.0 )Electric vehicle conductive charging system Part 22: AC electricvehicle charging stationTC 85IEC 61557-9:2009 ( Ed 2.0 )Electrical safety in low voltage distribution systems up to 1 000 Vac and 1 500 V dc - Equipment for testing, measuring or monitoringof protective measures Part 9: Equipment for insulation faultlocation in ITsystemsTC 85IEC 61557-11:2009 ( Ed 1.0 )Electrical safety in low voltage distribution systems up to 1 000 va.c. and 1 500 v d.c. - Equipment for testing, measuring ormonitoring of protective measures Part 11: Effectiveness ofresidual current monitors RCMS) type A and type B in TT, TN andIT systemsTC 91IEC 61249-2-1:2005 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-1: Reinforced base materials, clad and unclad - Phenoliccellulose paper reinforced laminated sheets, economic grade, coppercladTC 91IEC 61249-2-2:2005 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-2: Reinforced base materials, clad and unclad - Phenoliccellulose paper reinforced laminated sheets, high electrical grade,copper-cladTC 91IEC 61249-2-4:2001 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-4: Reinforced base materials clad and unclad - Polyesternon-woven/woven fiberglass laminated sheet of defined flammability(vertical burning test), copper-cladTC 91IEC 61249-2-5:2003 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-5: Reinforced base materials, clad and unclad - Brominatedepoxide cellulose paper reinforced core / woven E-glass reinforcedsurfaces laminated sheets of defined flammability (vertical burningtest), copper-cladTC 91IEC 61249-2-6:2003 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-6: Reinforced base materials, clad and unclad - Brominatedepoxide non-woven/woven E-glass reinforced laminated sheets ofdefined flammability (vertical burning test), copper-cladTC 91IEC 61249-2-7:2002 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-7: Reinforced base materials clad and unclad - Epoxide wovenE-glass laminated sheet of defined flammability (vertical burningtest), copper-cladTC 91IEC 61249-2-8:2003 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-8: Reinforced base materials, clad and unclad - Modifiedbrominated epoxide woven fibreglass reinforced laminated sheets ofdefined flammability (vertical burning test), copper-cladTC 91IEC 61249-2-9:2003 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresLista Mensal - Normas p. 24 de 28 15 Abril 2009

Part 2-9: Reinforced base materials, clad and unclad -Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (verticalburning test), copper-cladTC 91IEC 61249-2-10:2003 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-10: Reinforced base materials clad and unclad - Cyanateester, brominated epoxide, modified or unmodified, woven E-glassreinforced laminate sheets of defined flammability (vertical burningtest), copper-cladTC 91IEC 61249-2-11:2003 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-11: Reinforced base materials, clad and unclad - Polyimide,brominated epoxide modified or unmodified, woven E-glassreinforced laminated sheets of defined flammability (vertical burningtest), copper-cladTC 91IEC 61249-2-12:1999 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-12: Sectional specification set for reinforced basematerials, clad and unclad - Epoxide non-woven aramid laminate ofdefined flammability, copper-cladTC 91IEC 61249-2-13:1999 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-13: Sectional specification set for reinforced basematerials, clad and unclad - Cyanate ester non-woven aramidlaminate of defined flammability, copper-cladTC 91IEC 61249-2-18:2002 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-18: Reinforced base materials, clad and unclad - Polyesternon-woven fibreglass reinforced laminated sheet of definedflammability (vertical burning test), copper-cladTC 91IEC 61249-2-19:2001 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-19: Reinforced base materials, clad and unclad - Epoxidecross-plied linear fibreglass-reinforced laminated sheets of definedflammability (vertical burning test), copper cladTC 91IEC 61249-2-21:2003 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-21: Reinforced base materials, clad and unclad -Non-halogenated epoxide woven E-glass reinforced laminated sheetsof defined flammability (vertical burning test), copper-cladTC 91IEC 61249-2-22:2005 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-22: Reinforced base materials, clad and unclad - Modifiednon-halogenated epoxide woven E-glass laminated sheets of definedflammability (vertical burning test), copper-cladTC 91IEC 61249-2-23:2005 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-23: Reinforced base materials, clad and unclad -Non-halogenated phenolic, cellulose paper reinforced laminatedsheets, economic grade, copper-cladTC 91IEC 61249-2-26:2005 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-26: Reinforced base materials clad and unclad -Non-halogenated epoxide non-woven/woven E-glass reinforcedlaminated sheets of defined flammability (vertical burning test),copper-cladTC 91IEC 61249-2-31:2009 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-31: Reinforced base materials clad and unclad - Halogenatedmodified or unmodified resin system, woven E-glass laminatedsheets of defined relative permittivity (equal or less than 4.1 at 1GHz) and flammability (vertical burning test), copper-cladTC 91IEC 61249-2-32:2009 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-32: Reinforced base materials clad and unclad - Halogenatedmodified or unmodified resin system, woven E-glass laminatedsheets of defined relative permittivity (equal or less than 3.7 at 1GHz) and flammability (vertical burning test), copper-cladTC 91IEC 61249-2-33:2009 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-33: Reinforced base materials clad and unclad -Non-halogenated modified or unmodified resin system, woven E-glass laminated sheets of defined relative permittivity (equal or lessthan 4.1 at 1 GHz) and flammability (vertical burning test), coppercladTC 91IEC 61249-2-34:2009 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-34: Reinforced base materials clad and unclad -Non-halogenated modified or unmodified resin system, woven E-glass laminated sheets of defined relative permittivity (equal or lessthan 3.7 at 1 GHz) and flammability (vertical burning test), coppercladTC 91IEC 61249-2-35:2008 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-35: Reinforced base materials, clad and unclad - Modifiedepoxide woven E-glass laminate sheets of defined flammability(vertical burning test), copper-clad for lead-free assemblyTC 91IEC 61249-2-36:2008 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-36: Reinforced base materials, clad and unclad - Epoxidewoven E-glass laminated sheet of defined flammability (verticalburning test), copper-clad for lead-free assemblyTC 91IEC 61249-2-37:2008 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-37: Reinforced base materials, clad and unclad - Modifiednon-halogenated epoxide woven E-glass laminate sheets of definedflammability (vertical burning test), copper-clad for lead-freeassemblyTC 91IEC 61249-2-38:2008 ( Ed 1.0 )Materials for printed boards and other interconnecting structuresPart 2-38: Reinforced base materials, clad and unclad -Non-halogenated epoxide woven E-glass laminate sheets of definedflammability (vertical burning test), copper-clad for lead-freeassemblyTC 91IEC 62137:2004 ( Ed 1.0 )Environmental and endurance testing - Test methods forsurface-mount boards of area array type packages FBGA, BGA,FLGA, LGA, SON and QFNTC 91IEC 62137:2004 /CORRIGENDUM Jan:2005 ( Ed 1.0 )Environmental and endurance testing - Test methods forLista Mensal - Normas p. 25 de 28 15 Abril 2009

surface-mount boards of area array type packages FBGA, BGA,FLGA, LGA, SON and QFNTC 91IEC 62137-1-1:2007 ( Ed 1.0 )Surface-mount technology - Environmental and endurance testmethods for surface mount solder joint Part 1-1: Pull strength testTC 91IEC 62137-1-2:2007 ( Ed 1.0 )Surface mounting technology - Environmental and endurance testmethods for surface mount solder joint Part 1-2: Shear strength testTC 91IEC 62137-1-3:2008 ( Ed 1.0 )Surface mounting technology - Environmental and endurance testmethods for surface mount solder joint Part 1-3: Cyclic drop testTC 91IEC 62137-1-4:2009 ( Ed 1.0 )Surface mounting technology - Environmental and endurance testmethods for surface mount solder joint Part 1-4: Cyclic bending testTC 91IEC 62137-1-5:2009 ( Ed 1.0 )Surface mounting technology - Environmental and endurance testmethods for surface mount solder joints Part 1-5: Mechanical shearfatigue testTC 96IEC 61558-1:2005 /A 1:2009 ( Ed 2.0 )Safety of power transformers, power supplies, reactors and similarproducts Part 1: General requirements and testsTC 100IEC 60461:2001 ( Ed 3.0 )Time and control code for video tape recordersTC 100IEC 62106:2000 ( Ed 1.0 )Audio, Video And Multimedia Systems And EquipmentTC 106IEC 62369-1:2008 ( Ed 1.0 )Evaluation of human exposure to electromagnetic fields from shortrange devices (SRDs) in various applications over the frequencyrange 0 GHz to 300 GHz Part 1: Fields produced by devices used forelectronic article surveillance, radio frequency identification andsimilar systemsTC CISPR/CCISPR 18-1:1982 ( Ed 1.0 )Radio interference characteristics of overhead power lines andhigh-voltage equipment Part 1: Description of phenomenaTC CISPR/CCISPR 18-2:1986 ( Ed 1.0 )Radio interference characteristics of overhead power lines andhigh-voltage equipmentPart 2: Methods of measurement and procedure for determininglimitsTC CISPR/CCISPR 18-2:1986 /A 1:1993 ( Ed 1.0 )Radio interference characteristics of overhead power lines andhigh-voltage equipmentPart 2: Methods of measurement and procedure for determininglimitsTC CISPR/CCISPR 18-2:1986 /A 2:1996 ( Ed 1.0 )Radio interference characteristics of overhead power lines andhigh-voltage equipment Part 2: Methods of measurement andprocedure for determining limitsTC CISPR/CCISPR 18-3:1986 ( Ed 1.0 )Radio interference characteristics of overhead power lines andhigh-voltage equipmentPart 3: Code of practice for minimizing the generation of radionoiseTC CISPR/CCISPR 18-3:1986 /A 1:1996 ( Ed 1.0 )Radio interference characteristics of overhead power lines andhigh-voltage equipmentPart 3: Code of practice for minimizing the generation of radionoiseISOTC 6ISO 8254-1:2009 ( Ed 2 )Paper and board Measurement of specular gloss Part 1: 75 degreegloss with a converging beam, TAPPI methodTC 22ISO 15008:2009 ( Ed 2 )Road vehicles Ergonomic aspects of transport information andcontrol systems Specifications and compliance procedures forin-vehicle visual presentationTC 35ISO 23811:2009 ( Ed 1 )Paints and varnishes Determination of percentage volume ofnon-volatile matter by measuring the non-volatile matter content andthe density of the coating material, and calculation of the theoreticalspreading rateTC 38ISO 23606:2009 ( Ed 1 )Textiles Knitted fabrics Representation and pattern designTC 61ISO 14896:2009 ( Ed 2 )Plastics Polyurethane raw materials Determination of isocyanatecontentTC 83ISO 8936:2009 ( Ed 1 )Awnings for leisure accommodation vehicles Requirements andtest methodsTC 91ISO 2870:2009 ( Ed 2 )Surface active agents Detergents Determination of anionicactivematter hydrolysable and non-hydrolysable under acid conditionsTC 91ISO 8799:2009 ( Ed 2 )Surface active agents Sulfated ethoxylated alcohols andalkylphenols Determination of content of unsulfated matterTC 106ISO 21531:2009 ( Ed 1 )Dentistry Graphical symbols for dental instrumentsTC 138ISO 15877-1:2009 ( Ed 2 )Plastics piping systems for hot and cold water installationsChlorinated poly(vinyl chloride) (PVC-C) Part 1: GeneralTC 138ISO 15877-2:2009 ( Ed 2 )Plastics piping systems for hot and cold water installationsChlorinated poly(vinyl chloride) (PVC-C) Part 2: PipesTC 138ISO 15877-3:2009 ( Ed 2 )Plastics piping systems for hot and cold water installationsLista Mensal - Normas p. 26 de 28 15 Abril 2009

Chlorinated poly(vinyl chloride) (PVC-C) Part 3: FittingsTC 138ISO 15877-5:2009 ( Ed 2 )Plastics piping systems for hot and cold water installationsChlorinated poly(vinyl chloride) (PVC-C) Part 5: Fitness forpurpose of the systemTC 163ISO 15927-2:2009 ( Ed 1 )Hygrothermal performance of buildings Calculation and presentationof climatic data Part 2: Hourly data for design cooling loadTC 172ISO 18369-1:2006 /A 1:2009 ( Ed 1 )Ophthalmic optics Contact lenses Part 1: Vocabulary, classificationsystem and recommendations for labelling specifications -Amendment 1ISO/IECTC TMBISO/IEC GUIDE 2:2004 ( Ed 8.0 )Standardization and related activities - General vocabularyTC TMBISO/IEC GUIDE 21:1999 ( Ed 2 )Adoption of International Standards as regional or nationalstandardsTC CASCOISO/IEC GUIDE 23:1982 ( Ed 1 )Methods of indicating conformity with standards for third-partycertification systemsTC CASCOISO/IEC GUIDE 23:1982 ( Ed 1 )Methods of indicating conformity with standards for third-partycertification systemsTC CASCOISO/IEC GUIDE 25:1990 ( Ed 3 )General requirements for the competence of calibration and testinglaboratoriesTC CASCOISO/IEC GUIDE 28:2004 ( Ed 1 )Conformity assessment - Guidance on a third-party certificationsystem for productsTC CASCOISO/IEC GUIDE 28:2004 ( Ed 1 )Conformity assessment -- Guidance on a third-party certificationsystem for productsTC TMBISO/IEC GUIDE 51:1999 ( Ed 2 )Safety aspects - Guidelines for their inclusion in standardsTC CASCOISO/IEC GUIDE 53:2005 ( Ed 2 )Conformity assessment -- Guidance on the use of an organization'squality management system in product certificationTC CASCOISO/IEC GUIDE 53:2005 ( Ed 2 )Conformity assessment -- Guidance on the use of an organization'squality management system in product certificationTC CASCOISO/IEC GUIDE 58:1993 ( Ed 1 )Calibration and testing laboratory accreditation systems -- Generalrequirements for operation and recognitionTC CASCOISO/IEC GUIDE 61:1996 ( Ed 1 )General requirements for assessment and accreditation ofcertification/registration bodiesTC CASCOISO/IEC GUIDE 62:1996 ( Ed 1 )General requirements for bodies operating assessment andcertification/registration of quality systemsTC CASCOISO/IEC GUIDE 66:1999 ( Ed 1 )General requirements for bodies operating assessment andcertification/registration of environmental management systems(EMS)TC CASCOISO/IEC GUIDE 67:2004 ( Ed 1 )Conformity assessment - Fundamentals of product certificationTC CASCOISO/IEC GUIDE 67:2004 ( Ed 1 )Conformity assessment -- Fundamentals of product certificationTC TMBISO/IEC GUIDE 71:2001 ( Ed 1 )Guidelines for standards developers to address the needs of olderpersons and persons with disabilitiesTC COPOLCOISO/IEC GUIDE 74:2004 ( Ed 1 )Graphical symbols - Technical guidelines for the consideration ofconsumers' needsTC TMBISO/IEC GUIDE 75:2006 ( Ed 1 )Strategic principles for future IEC and ISO standardization inindustrial automationISO/IEC JTC1TC 1ISO/IEC 4909:2006 ( Ed 1.0 )Identification cards - Financial transaction cards - Magnetic stripedata content for track 3TC 1ISO/IEC 7810:2003 ( Ed 3.0 )Identification cards - Physical characteristicsTC 1ISO/IEC 7811-7:2004 ( Ed 1.0 )Identification cards - Recording technique Part 7: Magnetic stripe -High coercivity, high densityTC 1ISO/IEC 7813:2006 ( Ed 6.0 )Information technology - Identification cards - Financial transactioncardsTC 1ISO/IEC 7816-1:1998 ( Ed 1.0 )Identification cards - Integrated circuit(s) cards with contacts Part 1:Physical characteristicsTC 1ISO/IEC 7816-1:1998 /A 1:2003 ( Ed 1.0 )Identification cards - Integrated circuit(s) cards with contacts Part1: Physical characteristics - Maximum height of the IC contactsurfaceTC 1ISO/IEC 7816-2:2007 ( Ed 2.0 )Lista Mensal - Normas p. 27 de 28 15 Abril 2009

Identification cards - Integrated circuit cards Part 2: Cards withcontacts -- Dimensions and location of the contactsTC 1ISO/IEC 7816-3:2006 ( Ed 3.0 )Identification cards - Integrated circuit cardsPart 3: Cards with contacts - Electrical interface and transmissionprotocolsISO/IEC 21000-7:2007 /A 1:2008 ( Ed 1.0 )Information technology - Multimedia framework (MPEG-21) Part 7:Digital Item Adaptation - Query format capabilitiesTC 1ISO/IEC 7816-4:2005 ( Ed 2.0 )Identification cards - Integrated circuit cards Part 4: Organization,security and commands for interchangeTC 1ISO/IEC 7816-6:2004 ( Ed 2.0 )Identification cards - Integrated circuit cards Part 6: Interindustrydata elements for interchangeTC 1ISO/IEC 7816-8:2004 ( Ed 2.0 )Identification cards - Integrated circuit cards Part 8: Commands forsecurity operationsTC 1ISO/IEC 7816-9:2004 ( Ed 2.0 )Identification cards - Integrated circuit cards Part 9: Commandsfor card managementTC 1ISO/IEC 7816-11:2004 ( Ed 1.0 )Identification cards - Integrated circuit cards Part 11: Personalverification through biometric methodsTC 1ISO/IEC 7816-15:2004 ( Ed 1.0 )Identification cards - Integrated circuit cards Part 15:Cryptographic information applicationTC 1ISO/IEC 9798-2:2008 ( Ed 3.0 )Information technology - Security techniques - Entity authenticationPart 2: Mechanisms using symmetric encipherment algorithmsTC 1ISO/IEC 15444-10:2008 ( Ed 1.0 )Information technology - JPEG 2000 image coding system:Extensions for three-dimensional dataTC 1ISO/IEC 19757-2:2008 ( Ed 2.0 )Information technology - Document Schema Definition Language(DSDL) Part 2: Regular-grammar-based validation - RELAX NGTC 1ISO/IEC 19757-3:2006 ( Ed 1.0 )Information technology - Document Schema Definition Languages(DSDL) Part 3: Rule-based validation - SchematronTC 1ISO/IEC 19757-4:2006 ( Ed 1.0 )Information technology - Document Schema Definition Languages(DSDL) Part 4: Namespace-based Validation DispatchingLanguage (NVDL)TC 1ISO/IEC 21000-7:2007 ( Ed 1.0 )Information technology - Multimedia framework (MPEG-21)Part 7: Digital Item AdaptationTC 1Lista Mensal - Normas p. 28 de 28 15 Abril 2009