normas - IPQ
normas - IPQ
normas - IPQ
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>normas</strong>Maio '09Pretende-se com esta publicação mensal fazer a divulgação das Normas Portuguesas recentemente editadas e anuladas,bem como das Normas Europeias adoptadas como Normas Portuguesas.Divulgam-se ainda as Normas Europeias e Internacionais publicadas e já disponíveis.ÍndicePágina1. Normas Portuguesas1.1 Normas Portuguesas publicadas 21.2 Normas Portuguesas anuladas 41.3 Normas Portuguesas em re-exame 71.4 Normas Europeias adoptadas 82. Normas Europeias Publicadas2.1 CEN 192.2 CENELEC 262.3 CEN/CENELEC 282.4 ETSI 293. Normas Internacionais publicadasIEC30ISORua António Gião, 2 2829-513 CAPARICATel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt
<strong>normas</strong>1. Normas Portuguesas1.1 Normas Portuguesas publicadasNos termos do Decreto-Lei nº 142/2007, de 27 de Abril, e tendo em conta o disposto na Directiva CNQ 3/2001,informa-se que as Normas Portuguesas referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NP ENV, número,parte e data), o preço, o título e a correspondência a documentos europeus e/ou internacionais, quando existam, onúmero do Termo de Homologação e a respectiva data.C30 / CT 3 ICS 87.040NP EN 1062-1:2009 ( 2ª Edição )Preço: 17,50 EURTintas e vernizes Produtos de pintura e esquemas de pintura aaplicar em alvenarias e betão no exterior Parte 1: ClassificaçãoEN 1062-1:2004 IDTTermo de Homologação nº 2009/0070, 2009-04-03C30 / CT 3 ICS 17.140 / ICS 91.120NP EN 29053:2009 ( 1ª Edição )Preço: 17,50 EURAcústica Materiais para aplicações acústicas Determinação daresistência ao escoamento de ar(ISO 9053:1991)EN 29053:1993 IDTTermo de Homologação nº 2009/0062, 2009-03-27C350 / CT 35 ICS 67.120NP 1614-1:2009 ( 3ª Edição )Preço: 7,00 EURCarnes e produtos cárneos Determinação do teor de humidade Parte1: Método de referênciaTermo de Homologação nº 2009/0058, 2009-03-25C350 / CT 35 ICS 67.120NP 1614-2:2009 ( 1ª Edição )Preço: 7,00 EURCarnes e produtos cárneos Determinação do teor de humidade Parte2: Método correnteTermo de Homologação nº 2009/0059, 2009-03-25C350 / CT 35 ICS 67.120NP 1847-1:2009 ( 2ª Edição )Preço: 10,50 EURCarnes e produtos cárneos Determinação do teor de nitratos Parte 1:Método de referênciaNP 1847:1986 /Emenda 1:1988 IDTTermo de Homologação nº 2009/0057, 2009-03-25C710 / CT 71 ICS 13.040NP ISO 11222:2009 ( 1ª Edição )Preço: 24,50 EURQualidade do ar Determinação da incerteza da média temporal dasmedições de qualidade do arISO 11222:2001 IDTTermo de Homologação nº 2009/0065, 2009-03-31C710 / CT 71 ICS 13.040NP ISO 13752:2009 ( 1ª Edição )Preço: 21,00 EURQualidade do ar Avaliação da incerteza do método de medição emensaio de campo utilizando um segundo método como referênciaISO 13752:1998 IDTTermo de Homologação nº 2009/0067, 2009-03-31C760 / CT 76 ICS 83.060NP ISO 36:2009 ( 2ª Edição )Preço: 7,00 EURBorracha, vulcanizada ou termoplástica Determinação da aderênciaao tecido têxtilISO 36:2005 IDTTermo de Homologação nº 2009/0034, 2009-02-16C760 / CT 76 ICS 83.060NP ISO 7619-1:2009 ( 2ª Edição )Preço: 14,00 EURBorracha vulcanizada ou termoplástica Determinação da dureza porpenetração utilizando um durómetro Parte 1: Método do durómetro(dureza Shore)ISO 7619-1:2004 IDTTermo de Homologação nº 2009/0032, 2009-02-16C760 / CT 76 ICS 83.060NP ISO 7619-2:2009 ( 2ª Edição )Preço: 10,50 EURBorracha, vulcanizada ou termoplástica Determinação da durezapor penetração utilizando um durómetro Parte 2: Método dodurómetro de bolso IRHDISO 7619-2:2004 IDTTermo de Homologação nº 2009/0033, 2009-02-16C900 / CT 90 ICS 71.100NP EN 898:2009 ( 1ª Edição )Preço: 21,00 EURProdutos químicos utilizados no tratamento da água destinada aconsumo humano Hidrogenocarbonato de sódioEN 898:2005 IDTTermo de Homologação nº 2009/0055, 2009-03-23C900 / CT 90 ICS 71.100NP EN 901:2009 ( 2ª Edição )Preço: 40,00 EURProdutos químicos utilizados no tratamento da água destinada aconsumo humano Hipoclorito de sódioEN 901:2007 IDTTermo de Homologação nº 2009/0054, 2009-03-23C900 / CT 90 ICS 71.100NP EN 1200:2009 ( 1ª Edição )Preço: 21,00 EURProdutos químicos utilizados no tratamento da água destinada aconsumo humano Fosfato de sódioEN 1200:2005 IDTTermo de Homologação nº 2009/0046, 2009-03-16C900 / CT 90 ICS 71.100NP EN 1201:2009 ( 1ª Edição )Preço: 21,00 EURProdutos químicos utilizados no tratamento da água destinada aconsumo humano Dihidrogenofosfato de potássioEN 1201:2005 IDTTermo de Homologação nº 2009/0047, 2009-03-16Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>C900 / CT 90 ICS 97.145NP EN 13101:2009 ( 1ª Edição )Preço: 40,00 EURDegraus para câmaras de visita Requisitos, marcação, ensaios eavaliação da conformidadeEN 13101:2002 IDTTermo de Homologação nº 2009/0056, 2009-03-23NP EN 14396:2009 ( 1ª Edição )Preço: 31,50 EUREscadas fixas para câmaras de visitaEN 14396:2004 IDTTermo de Homologação nº 2009/0053, 2009-03-20C1430 / CT 143 ICS 45.080 / 93.100NP EN 13230-2:2009 ( 1ª Edição )Preço: 21,00 EURAplicações ferroviárias Via - Travessa de betão Parte 2: Travessasmonobloco de betão pré-esforçadoEN 13230-2:2002 IDTTermo de Homologação nº 2009/0074, 2009-04-17C1430 / CT 143 ICS 45.080 / 93.100NP EN 13230-3:2009 ( 1ª Edição )Preço: 28,00 EURAplicações ferroviárias Travessas de betão Parte 3: Travessasbi-bloco de betão armadoEN 13230-3:2002 IDTTermo de Homologação nº 2009/0075, 2009-04-17C1430 / CT 143 ICS 45.080 / 93.100NP EN 13230-4:2009 ( 1ª Edição )Preço: 21,00 EURAplicações ferroviárias Via - Travessas de betão Parte 4: Travessasde betão pré-esforçado para aparelhos de viaEN 13230-4:2002 IDTTermo de Homologação nº 2009/0076, 2009-04-17C1430 / CT 143 ICS 45.080 / 93.100NP EN 13230-5:2009 ( 1ª Edição )Preço: 10,50 EURAplicações ferroviárias Via - Travessas de betão Parte 5: ElementosespeciaisEN 13230-5:2002 IDTTermo de Homologação nº 2009/0077, 2009-04-17Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>1.2 Normas Portuguesas anuladasNos termos do Decreto-Lei nº 142/2007, de 27 de Abril, e tendo em conta o disposto na Directiva CNQ 3/2001,informa-se que as anulações das Normas Portuguesas referenciadas tornam-se efectivas no dia seguinte ao da ediçãodesta Lista Mensal.Para cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NP ENV, número,parte e data), o título, a correspondência a documentos europeus e/ou internacionais quando existam, o número doTermo de (Anulação, Homologação ou Adopção) e a respectiva data, bem como a referência do documento que asubstitui.C40 / CT 4NP EN 13138-1:2006 ( 1ª Edição )Equipamentos de flutuação para a aprendizagem de natação Parte 1:Requisitos de segurança e métodos de ensaio para equipamentos deflutuação a vestirEN 13138-1:2003 IDTAnulada em: 2009-04-1Substituida por: EN 13138-1:2008C60 / CT 6NP EN 20638:1994 ( 1ª Edição )Pastas Determinação do teor de matéria seca(ISO 638:1978)EN 20638:1993 IDTAnulada em: 2009-04-1Substituida por: EN ISO 638:2008C160 / CT 16NP EN 13170:2001 ( 1ª Edição )Produtos de isolamento térmico para aplicação em edifíciosProdutos manufacturados de cortiça expandida (ICB) EspecificaçãoEN 13170:2001 IDTAnulada em: 2009-04-3Substituida por: EN 13170:2008C390 / CT 39NP EN ISO 663:2005 ( 2ª Edição )Óleos e gorduras de origem animal e vegetal Determinação do teorde impurezas insolúveis(ISO 663:2000)EN ISO 663:2001 IDTAnulada em: 2009-04-3Substituida por: EN ISO 663:2008C420 / CT 42NP EN 813:2000 ( 1ª Edição )Equipamento de protecção individual para prevenção de quedas emaltura Arneses de cintura e pernasEN 813:1997 IDTAnulada em: 2009-04-3Substituida por: EN 813:2008C580 / CT 58NP EN 1446:1998 ( 1ª Edição )Sistemas de tubagens e condutas em plástico Tubos termoplásticos.Determinação da flexibilidade anelarEN 1446:1996 IDTAnulada em: 2009-04-1Substituida por: EN ISO 13968:2008C710 / CT 71NP ISO 7168-2:2004Qualidade do ar Troca de dados Parte 2: Formato condensado dedadosISO 7168-2:1999 IDTAnulada em: 2009-04-1C760 / CT 76NP ISO 36:2004 ( 1ª Edição )Borracha vulcanizada ou termoplástica Determinação da aderência aotêxtilISO 36:1999 IDTAnulada em: 2009-04-1Substituida por: NP ISO 36:2009C760 / CT 76NP ISO 7619:2001 ( 1ª Edição )Borracha Determinação da dureza por penetração utilizando umdurómetro de bolsoISO 7619:1997 IDTAnulada em: 2009-04-1Substituida por: NP ISO 7619-1:2009;NP ISO 7619-2:2009C800 / CT 80NP EN ISO 9001:2000 ( 2ª Edição )Sistemas de gestão da qualidade Requisitos(ISO 9001:2000)EN ISO 9001:2000 IDTAnulada em: 2009-04-3Substituida por: NP EN ISO 9001:2008C900 / CT 90NP EN 12931:2008 ( 1ª Edição )Produtos químicos utilizados no tratamento da água destinada aconsumo humano Produtos químicos utilizados em situações deemergência Dicloroisocianurato de sódio, anidroEN 12931:2000 IDTAnulada em: 2009-04-1Substituida por: EN 12931:2008C900 / CT 90NP EN 12932:2008 ( 1ª Edição )Produtos químicos utilizados no tratamento da água destinada aconsumo humano Produtos químicos utilizados em situações deemergência Dicloroisocianurato de sódio, dihidratadoEN 12932:2000 IDTAnulada em: 2009-04-1Substituida por: EN 12932:2008C960 / CT 96NP EN 13859-1:2008 ( 1ª Edição )Membranas de impermeabilização flexíveis Definição ecaracterísticas de barreiras flexíveis colocadas sob revestimentosde coberturas Parte 1: Barreiras para coberturas com elementosdescontínuosEN 13859-1:2005 IDTAnulada em: 2009-04-1Substituida por: EN 13859-1:2005+A1:2008C960 / CT 96Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>NP EN 13859-2:2008 ( 1ª Edição )Membranas de impermeabilização flexíveis Definição ecaracterísticasde barreiras flexíveis colocadas sob paredes Parte 2: Barreirasflexíveis para paredesEN 13859-2:2004 IDTAnulada em: 2009-04-1Substituida por: EN 13859-2:2004+A1:2008C1320 / CT 132NP EN 12393-1:2002 ( 1ª Edição )Alimentos não gordos Métodos multi-resíduos para determinação deresíduos de pesticidas por cromatografia em fase gasosa Parte 1:Considerações geraisEN 12393-1:1998 IDTAnulada em: 2009-04-3Substituida por: EN 12393-1:2008C1320 / CT 132NP EN 12393-2:2002 ( 1ª Edição )Alimentos não gordos Métodos multi-resíduos para determinação deresíduos de pesticidas por cromatografia em fase gasosa Parte 2:Métodos de extracção e de purificaçãoEN 12393-2:1998 IDTAnulada em: 2009-04-3Substituida por: EN 12393-2:2008C1320 / CT 132NP EN 12393-3:2002 ( 1ª Edição )Alimentos não gordos Métodos multi-resíduos para determinação deresíduos de pesticidas por cromatografia em fase gasosa Parte 3:Determinação e ensaios de confirmaçãoEN 12393-3:1998 IDTAnulada em: 2009-04-3Substituida por: EN 12393-3:2008C1540 / CT 154NP EN 12620:2004 ( 1ª Edição )Agregados para betãoEN 12620:2002 IDTAnulada em: 2009-04-3Substituida por: EN 12620-2002+A1:2008C1660 / CT 166NP EN 1176-1:2007 ( 2ª Edição )Equipamentos para espaços de jogo e recreio Parte 1: Requisitosgerais de segurança e métodos de ensaioEN 1176-1:1998 IDT;EN 1176-1:1998 /AC 1:1998 IDT;EN 1176-1:1Anulada em: 2009-04-1Substituida por: EN 1176-1:2008C1660 / CT 166NP EN 1176-2:2007 ( 2ª Edição )Equipamentos para espaços de jogo e recreio Parte 2: Requisitos desegurança específicos adicionais e métodos de ensaio para baloiçosEN 1176-2:1998 IDT;EN 1176-2:1998 /A 1:2003 IDTAnulada em: 2009-04-1Substituida por: EN 1176-2:2008C1660 / CT 166NP EN 1176-5:2007 ( 2ª Edição )Equipamentos para espaços de jogo e recreio Parte 5: Requisitos desegurança específicos adicionais e métodos de ensaio para carrosséisEN 1176-5:1998 IDTAnulada em: 2009-04-1Substituida por: EN 1176-5:2008C1660 / CT 166NP EN 1176-7:2007 ( 2ª Edição )Equipamentos para espaços de jogo e recreio Parte 7: Guia deinstalação, inspecção, manutenção e funcionamentoEN 1176-7:1997 IDTAnulada em: 2009-04-1Substituida por: EN 1176-7:2008C1660 / CT 166NP EN 1177:2007 ( 2ª Edição )Superfícies amortecedoras de impacto para espaços de jogo erecreio Requisitos de segurança e métodos de ensaioEN 1177:1997 IDTAnulada em: 2009-04-1Substituida por: EN 1177:2008E3400 / CTE 34NP EN 61048:1997 ( 1ª Edição )Aparelhagem auxiliar para lâmpadas Condensadores para uso emcircuitos de lâmpadas tubulares fluorescentes e outras lâmpadas dedescarga Prescrições gerais e de segurança(IEC 1048:1991, modificada + Errata 1992 + Emenda 1:1995)EN 61048:1993 IDT;EN 61048:1993 /A 1:1996 IDTAnulada em: 2009-04-1Substituida por: EN 61048:2006E6100 / CTE 61NP EN 50144-2-15:2003 ( 1ª Edição )Segurança das ferramentas eléctricas portáteis a motor Parte 2-15:Regras particulares para os aparadores de sebeEN 50144-2-15:2001 IDTAnulada em: 2009-04-2Substituida por: NP EN 60745-2-15:2008M083 /NP EN 12409:2002 ( 1ª Edição )Máquinas para borracha e plástico Máquinas de termoformagemRequisitos de segurançaEN 12409:1999 IDTAnulada em: 2009-04-1Substituida por: EN 12409:2008M091 /NP EN 12808-2:2007 ( 1ª Edição )Argamassas de juntas para ladrilhos Parte 2: Determinação daresistência à abrasãoEN 12808-2:2001 IDTAnulada em: 2009-04-1Substituida por: EN 12808-2:2008M097 /NP EN 1176-3:1998 ( 1ª Edição )Equipamentos para espaços de jogo e recreio Parte 3: Requisitos desegurança específicos adicionais e métodos de ensaio paraescorregasEN 1176-3:1998 IDTAnulada em: 2009-04-1Substituida por: EN 1176-3:2008M097 /NP EN 1176-3:1998 /A 1:2004 ( 1ª Edição )Equipamentos para espaços de jogo e recreio Parte 3: Requisitos desegurança específicos adicionais e métodos de ensaio paraescorregasEN 1176-3:1998 /A 1:2003 IDTAnulada em: 2009-04-2Substituida por: EN 1176-3:2008M097 /NP EN 1176-4:1998 /A 1:2004 ( 1ª Edição )Equipamentos para espaços de jogo e recreio Parte 4: Requisitos desegurança específicos adicionais e métodos de ensaio paraLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>teleféricosEN 1176-4:1998 /A 1:2003 IDTAnulada em: 2009-04-2Substituida por: EN 1176-4:2008NP EN 1176-4:1998 ( 1ª Edição )Equipamentos para espaços de jogo e recreio Parte 4: Requisitos desegurança específicos adicionais e métodos de ensaio parateleféricosEN 1176-4:1998 IDTAnulada em: 2009-04-1Substituida por: EN 1176-4:2008NP EN 1176-6:1998 ( 1ª Edição )Equipamentos para espaços de jogo e recreio Parte 6: Requisitos desegurança específicos adicionais e métodos de ensaio paraequipamentos oscilantesEN 1176-6:1998 IDTAnulada em: 2009-04-1Substituida por: EN 1176-6:2008NP EN 1176-6:1998 /A 1:2004 ( 1ª Edição )Equipamentos para espaços de jogo e recreio Parte 6: Requisitos desegurança específicos adicionais e métodos de ensaio paraequipamentos oscilantesEN 1176-6:1998 /A 1:2002 IDTAnulada em: 2009-04-2Substituida por: EN 1176-6:2008NP EN 12572:2003 ( 1ª Edição )Estruturas artificiais de escalada Pontos de protecção, requisitos deestabilidade e métodos de ensaio.EN 12572:1998 IDTAnulada em: 2009-04-3Substituida por: EN 12572-2:2008;EN 12572-3:2008Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>1.3 Normas Portuguesas em re-exameCom o objectivo de se assegurar a actualidade das <strong>normas</strong> integrantes do acervo normativo nacional, as NormasPortuguesas devem ser objecto de um re-exame periódico.Mensalmente, o <strong>IPQ</strong> colocará em inquérito público, por um período de 30 dias úteis, através da Lista MensalNormas e do site, uma lista de <strong>normas</strong> portuguesas pertencentes a um determinado escalão etário.Para cada referência, menciona-se a designação codificada (prefixo NP, número, parte e data), o título e a respectivadata, bem como o seu autor.Pretende-se com este inquérito público, que os interessados que pretendam dar os seus contributos o possam fazer, paracada uma das <strong>normas</strong> portuguesas constantes na presente listagem, respondendo aos seguintes pontos, tendo em conta avossa experiência:1 - Avaliação em termos de actualidade, a responder em alternativa:‣ A norma portuguesa está actual ?‣ A norma portuguesa deve ser revista ?‣ A norma portuguesa está obsoleta ?2 - Eventual legislação relacionada:‣ A norma portuguesa está referida em legislação ? Se sim, qual ?3 - ComentárioNOTA: Os interessados são convidados a pronunciarem-se somente sobre as <strong>normas</strong> que entendam conveniente,devendo enviar a informação ao Serviço de Normalização (NOR@mail.ipq.pt).LISTA VAZIALista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>1.4 Normas Europeias adoptadasNos termos do Decreto-Lei nº 142/2007, de 27 de Abril, e tendo em conta o disposto na Directiva CNQ 3/2001, e emcumprimento das Regras dos Organismos Europeus de Normalização CEN, CENELEC e ETSI, as adopções dasNormas Europeias referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.Para cada Norma, indica-se a designação codificada (prefixo, número, ano), o título, o número do Termo de Adopção ea respectiva data.Os textos das Normas Europeias Adoptadas como Normas Portuguesas estão disponíveis para consulta ou aquisiçãoneste Instituto nas línguas oficiais do CEN/CENELEC (inglês, francês e alemão) e do ETSI (inglês).EN 196-3:2005+A1:2008 ( 1ª Edição )Methods of testing cement Part 3: Determination of setting timesand soundnessTermo de Adopção nº2009/ 0389, 2009-04-29EN 583-6:2008 ( 1ª Edição )Non-destructive testing Ultrasonic examination Part 6: Timeof- flightdiffraction technique as a method for detection and sizing ofdiscontinuitiesTermo de Adopção nº2009/ 0531, 2009-04-29EN 913:2008 ( 2ª Edição )Gymnastic equipment General safety requirements and test methodsTermo de Adopção nº2009/ 0390, 2009-04-29EN 914:2008 ( 2ª Edição )Gymnastic equipment Parallel bars and combinationasymmetric/parallel bars Requirements and test methods includingsafetyTermo de Adopção nº2009/ 0391, 2009-04-29EN 915:2008 ( 2ª Edição )Gymnastic equipment Asymmetric bars Requirements and testmethods including safetyTermo de Adopção nº2009/ 0392, 2009-04-29EN 1032-:2003+A1:2008 ( 1ª Edição )Mechanical vibration Testing of mobile machinery in order todetermine the vibration emission valueTermo de Adopção nº2009/ 0393, 2009-04-29EN 1074-6:2008 ( 2ª Edição )Valves for water supply Fitness for purpose requirements andappropriate verification tests Part 6: HydrantsTermo de Adopção nº2009/ 0394, 2009-04-29EN 1093-1:2008 ( 2ª Edição )Safety of machinery Evaluation of the emission of airbornehazardous substances Part 1: Selection of test methodsTermo de Adopção nº2009/ 0532, 2009-04-29EN 1265-:1999+A1:2008 ( 1ª Edição )Safety of machinery Noise test code for foundry machines andequipmentTermo de Adopção nº2009/ 0395, 2009-04-29EN 1279-5+A1:2008 ( 1ª Edição )Glass in building Insulating glass units Part 5: Evaluation ofconformityTermo de Adopção nº2009/ 0396, 2009-04-29EN 1299-:1997+A1:2008 ( 1ª Edição )Mechanical vibration and shock Vibration isolation of machinesInformation for the application of source isolationTermo de Adopção nº2009/ 0397, 2009-04-29EN 1474-1:2008 ( 1ª Edição )Installation and equipment for liquefied natural gas Design andtesting of marine transfer systems Part 1: Design and testing oftransfer armsTermo de Adopção nº2009/ 0533, 2009-04-29EN 1474-2:2008 ( 1ª Edição )Installation and equipment for liquefied natural gas Design andtesting of marine transfer systems Part 2: Design and testing oftransfer hosesTermo de Adopção nº2009/ 0534, 2009-04-29EN 1474-3:2008 ( 1ª Edição )Installation and equipment for liquefied natural gas Design andtesting of marine transfer systems Part 3: Offshore transfer systemsTermo de Adopção nº2009/ 0535, 2009-04-29EN 1492-1:2000+A1:2008 ( 1ª Edição )Textile slings Safety Part 1: Flat woven webbing slings made ofman-made fibres for general purpose useTermo de Adopção nº2009/ 0398, 2009-04-29EN 1492-2:2000+A1:2008 ( 1ª Edição )Textile slings Safety Part 2: Roundslings made of man-made fibresfor general purpose useTermo de Adopção nº2009/ 0399, 2009-04-29EN 1492-4:2004+A1:2008 ( 1ª Edição )Textile slings Safety Part 4: Lifting slings for general servicemade from natural and man-made fibre ropesTermo de Adopção nº2009/ 0400, 2009-04-29EN 1493-:1998+A1:2008 ( 1ª Edição )Vehicle liftsTermo de Adopção nº2009/ 0536, 2009-04-29EN 1494-:2000+A1:2008 ( 1ª Edição )Mobile or movable jacks and associated lifting equipmentTermo de Adopção nº2009/ 0537, 2009-04-29EN 1509:2008 ( 3ª Edição )Playing field equipment Badminton equipment Functional and safetyrequirements, test methodsTermo de Adopção nº2009/ 0401, 2009-04-29Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>EN 1626:2008 ( 2ª Edição )Cryogenic vessels Valves for cryogenic serviceTermo de Adopção nº2009/ 0402, 2009-04-29EN 1634-2:2008 ( 1ª Edição )Fire resistance and smoke control tests for door, shutter andopenable window assemblies and elements of building hardwarePart 2: Fire resistance characterisation test for elements of buildinghardwareTermo de Adopção nº2009/ 0403, 2009-04-29EN 1677-1:2000+A1:2008 ( 1ª Edição )Components for slings Safety Part 1: Forged steel components,Grade 8Termo de Adopção nº2009/ 0404, 2009-04-29EN 1677-4:2000+A1:2008 ( 1ª Edição )Components for slings Safety Part 4: Links, Grade 8Termo de Adopção nº2009/ 0405, 2009-04-29EN 1677-5:2001+A1:2008 ( 1ª Edição )Components for slings Safety Part 5: Forged steel lifting hooks withlatch - Grade 4Termo de Adopção nº2009/ 0406, 2009-04-29EN 1677-6:2008+A1:2008 ( 1ª Edição )Components for slings Safety Part 6: Links - Grade 4Termo de Adopção nº2009/ 0407, 2009-04-29EN 1736:2008 ( 2ª Edição )Refrigerating systems and heat pumps Flexible pipe elements,vibration isolators, expansion joints and non-metallic tubesRequirements, design and installationTermo de Adopção nº2009/ 0408, 2009-04-29EN 1796-:2006+A1:2008 ( 1ª Edição )Plastics piping systems for water supply with or without pressureGlass-reinforced thermosetting plastics (GRP) based on unsaturatedpolyester resin (UP)Termo de Adopção nº2009/ 0409, 2009-04-29EN 1858:2008 ( 2ª Edição )Chimneys Components Concrete flue blocksTermo de Adopção nº2009/ 0538, 2009-04-29EN 2206:2008 ( 1ª Edição )Aerospace series Steel FE-PL1502 (25CrMo4) 650 MPa
<strong>normas</strong>EN 13445-6:2002 /A 3:2008 ( 1ª Edição )Unfired pressure vessels Part 6: Requirements for the design andfabrication of pressure vessels and pressure parts constructed fromspheroidal graphite cast ironTermo de Adopção nº2009/ 0452, 2009-04-29EN 13490-:2001+A1:2008 ( 1ª Edição )Mechanical vibration Industrial trucks Laboratory evaluation andspecification of operator seat vibrationTermo de Adopção nº2009/ 0453, 2009-04-29EN 13648-1:2008 ( 2ª Edição )Cryogenic vessels Safety devices for protection against excessivepressure Part 1: Safety valves for cryogenic serviceTermo de Adopção nº2009/ 0454, 2009-04-29EN 13696:2008 ( 1ª Edição )Wood flooring Test methods to determine elasticity and resistanceto wear and impact resistanceTermo de Adopção nº2009/ 0542, 2009-04-29EN 13785-:2005+A1:2008 ( 1ª Edição )Regulators with a capacity of up to and including 100 kg/h, havinga maximum nominal outlet pressure of up to and including 4 bar,other than those covered by EN 12864 and their associated safetydevices for butane, propane or their mixturesTermo de Adopção nº2009/ 0455, 2009-04-29EN 13786-:2004+A1:2008 ( 1ª Edição )Automatic change-over valves having a maximum outlet pressure ofup to and including 4 bar with a capacity of up to and including 100kg/h, and their associated safety devices for butane, propane or theirmixturesTermo de Adopção nº2009/ 0456, 2009-04-29EN 13889-:2003+A1:2008 ( 1ª Edição )Forged steel shackles for general lifting purposes Dee shackles andbow shackles Grade 6 - SafetyTermo de Adopção nº2009/ 0457, 2009-04-29EN 14012:2008 ( 2ª Edição )Postal services Quality of service Complaints handling principlesTermo de Adopção nº2009/ 0458, 2009-04-29EN 14081-4.2005+A4:2008 ( 1ª Edição )Timber structures Strength graded structural timber withrectangular cross section Part 4: Machine grading - Grading machinesettings for machine controlled systemsTermo de Adopção nº2009/ 0543, 2009-04-29EN 14116-2007+A1:2008 ( 1ª Edição )Tanks for transport of dangerous goods Digital interface for theproduct recognition deviceTermo de Adopção nº2009/ 0459, 2009-04-29EN 14214:2008 ( 2ª Edição )Automotive fuels Fatty acid methyl esters (FAME) for dieselengines Requirements and test methTermo de Adopção nº2009/ 0460, 2009-04-29EN 14364-:2006+A1:2008 ( 1ª Edição )Plastics piping systems for drainage and sewerage with or withoutpressure Glass-reinforced thermosetting plastics (GRP) based onunsaturated polyester resin (UP)Specifications for pipes, fittings and jointsTermo de Adopção nº2009/ 0461, 2009-04-29EN 14563:2008 ( 1ª Edição )Chemical disinfectants and antiseptics Quantitative carrier test forthe evaluation of mycobactericidal or tuberculocidal activity ofchemical isinfectants used for instruments in the medical area Testmethod and requirements (phase 2, step 2)Termo de Adopção nº2009/ 0462, 2009-04-29EN 14710-1:2005+A2:2008 ( 1ª Edição )Fire-fighting pumps Fire-fighting centrifugal pumps without primerPart 1: Classification, general and safety requirementsTermo de Adopção nº2009/ 0544, 2009-04-29EN 14710-2:2005+A2:2008 ( 1ª Edição )Fire-fighting pumps Fire-fighting centrifugal pumps without primerPart 2: Verification of general and safety requirementsTermo de Adopção nº2009/ 0545, 2009-04-29EN 14890-1:2008 ( 1ª Edição )Application Interface for smart cards used as Secure SignatureCreation Devices Part 1: Basic servicesTermo de Adopção nº2009/ 0546, 2009-04-29EN 14890-2:2008 ( 1ª Edição )Application Interface for smart cards used as Secure SignatureCreation Devices Part 2: Additional ServicesTermo de Adopção nº2009/ 0463, 2009-04-29EN 15001-2:2008 ( 1ª Edição )Gas infrastructure Gas installation pipework with an operatingpressure greater than 0,5 bar for industrial installations and greaterthan 5 bar for industrial and non-industrial installationsPart 2: Detailed functional requirements for commissioning,operation and maintenanceTermo de Adopção nº2009/ 0464, 2009-04-29EN 15061-:2007+A1:2008 ( 1ª Edição )Safety of machinery Safety requirements for strip processing linemachinery and equipmentTermo de Adopção nº2009/ 0465, 2009-04-29EN 15095-:2007+A1:2008 ( 1ª Edição )Power-operated mobile racking and shelving, carousels and storagelifts Safety requirementsTermo de Adopção nº2009/ 0547, 2009-04-29EN 15166:2008 ( 1ª Edição )Food processing machinery Automatic back splitting machines ofbutchery carcasses Safety and hygiene requiremeTermo de Adopção nº2009/ 0548, 2009-04-29EN 15170:2008 ( 1ª Edição )Characterization of sludges Determination of calorific valueTermo de Adopção nº2009/ 0466, 2009-04-29EN 15316-4-7:2008 ( 1ª Edição )Heating systems in buildings Method for calculation of systemenergy requirements and system efficiencies Part 4-7: Spaceheating generation systems, biomass combustion systemsTermo de Adopção nº2009/ 0467, 2009-04-29EN 15483:2008 ( 1ª Edição )Ambient air quality Atmospheric measurements near ground withFTIR spectroscopyTermo de Adopção nº2009/ 0468, 2009-04-29EN 15507:2008 ( 1ª Edição )Packaging Transport packaging for dangerous goodsComparative material testing of polyethylene gradesTermo de Adopção nº2009/ 0549, 2009-04-29Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>EN 15532:2008 ( 1ª Edição )Cycles TerminologyTermo de Adopção nº2009/ 0469, 2009-04-29EN 15609:2008 ( 1ª Edição )LPG equipment and accessories LPG propulsion systems for boats,yachts and other craft Installation requirementsTermo de Adopção nº2009/ 0470, 2009-04-29EN 15611:2008 ( 1ª Edição )Railway applications Braking Relay valvesTermo de Adopção nº2009/ 0471, 2009-04-29EN 15612:2008 ( 1ª Edição )Railway applications Braking Brake pipe accelerator valveTermo de Adopção nº2009/ 0472, 2009-04-29EN 15629:2008 ( 1ª Edição )Steel static storage systems Specification of storage equipmentTermo de Adopção nº2009/ 0473, 2009-04-29EN 15635:2008 ( 1ª Edição )Steel static storage systems Application and maintenance of storageequipmentTermo de Adopção nº2009/ 0474, 2009-04-29EN 15637:2008 ( 1ª Edição )Foods of plant origin Determination of pesticide residues usingLC-MS/MS following methanol extraction and clean-up usingdiatomaceous earthTermo de Adopção nº2009/ 0475, 2009-04-29EN 15644:2008 ( 1ª Edição )Traditionally designed prefabricated stairs made of solid woodSpecifications and requirementsTermo de Adopção nº2009/ 0550, 2009-04-29EN 15662:2008 ( 1ª Edição )Foods of plant origin Determination of pesticide residues usingGC-MS and/or LC-MS/MS following acetonitrileextraction/partitioning and clean-up by dispersive SPEQuEChERS-methodTermo de Adopção nº2009/ 0476, 2009-04-29EN 15696:2008 ( 1ª Edição )Self storage Specification for self storage servicesTermo de Adopção nº2009/ 0477, 2009-04-29EN 15702:2008 ( 1ª Edição )Cellular Plastics Cell count procedure for flexible and rigidpolyurethaneTermo de Adopção nº2009/ 0551, 2009-04-29EN 15704:2008 ( 1ª Edição )Liming materials Determination of the breakdown of granulatedcalcium and calcium/magnesium carbonates under the influence ofwaterTermo de Adopção nº2009/ 0552, 2009-04-29EN 15707:2008 ( 1ª Edição )Print media surveys Vocabulary and service requirementsTermo de Adopção nº2009/ 0478, 2009-04-29EN 15800:2008 ( 1ª Edição )Cylindrical helical springs made of round wire Qualityspecifications for cold coiled compression springsTermo de Adopção nº2009/ 0553, 2009-04-29EN 50083-8:2002 /A 11:2008 ( 2ª Edição )Cable networks for television signals, sound signals and interactiveservices Part 8: Electromagnetic compatibility for networksTermo de Adopção nº2009/ 0343, 2009-04-29EN 50106:2008 ( 2ª Edição )Safety of household and similar electrical appliances - Particularrules for routine tests referring to appliances under the scope of EN60335-1Termo de Adopção nº2009/ 0583, 2009-04-29EN 50131-2-3:2008 ( 1ª Edição )Alarm systems - Intrusion and hold-up systems Part 2-3:Requirements for microwave detectorsTermo de Adopção nº2009/ 0344, 2009-04-29EN 50131-2-5:2008 ( 1ª Edição )Alarm systems - Intrusion and hold-up systems Part 2-5:Requirements for combined passive infrared and ultrasonic detectorsTermo de Adopção nº2009/ 0345, 2009-04-29EN 50131-2-6:2008 ( 1ª Edição )Alarm systems - Intrusion and hold-up systems Part 2-6: Openingcontacts (magnetic)Termo de Adopção nº2009/ 0346, 2009-04-29EN 50408:2008 ( 1ª Edição )Household and similar electrical applianes - Safety - Particularrequirements for cab heaters for vehiclesTermo de Adopção nº2009/ 0347, 2009-04-29EN 50465:2008 ( 1ª Edição )Gas appliances - Fuel cell gas heating applianes - Fuel cell gasheating appliance of nominal heat input inferior or equal to 70 kWTermo de Adopção nº2009/ 0348, 2009-04-29EN 50483-5:2009 ( 1ª Edição )Test requirements for low voltage aerial bundled cable accessoriesPart 5: Electrical ageing testTermo de Adopção nº2009/ 0584, 2009-04-29EN 50500:2008 ( 1ª Edição )Measurement procedures of magnetic field levels generated byelectronic and electrical apparatus in the railway environment withrespect to human exposureTermo de Adopção nº2009/ 0585, 2009-04-29EN 50504:2008 ( 1ª Edição )Validation of arc welding equipmentTermo de Adopção nº2009/ 0586, 2009-04-29EN 55014-2:1997 /A 2:2008 ( 3ª Edição )Electromagnetic compatibility - Requirements for householdappliances, electric tools and similar apparatus Part 2: Immunity -Product family standard(CISPR 14-2:1997/A2:2008)Termo de Adopção nº2009/ 0587, 2009-04-29EN 60061-1:1993 /A 40:2008 ( 1ª Edição )Lamp caps and holders together with gauges for the control ofinterchangeability and safety Part 1: Lamp caps(IEC 60061-1:1969/A40:2008)Termo de Adopção nº2009/ 0349, 2009-04-29EN 60061-2:1993 /A 37:2008 ( 1ª Edição )Lamp caps and holders together with gauges for the control ofinterchangeability and safety Part 2: Lampholders(IEC 60061-2:1969/A37:2008)Termo de Adopção nº2009/ 0350, 2009-04-29Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>EN 60068-2-20:2008 ( 1ª Edição )Environmental testing Part 2-20: Tests - Test T: Test methods forsolderability and resistance to soldering heat of devices with leads(IEC 60068-2-20:2008)Termo de Adopção nº2009/ 0351, 2009-04-29EN 60079-14:2008 ( 3ª Edição )Explosive atmospheres Part 14: Electrical installations design,selection and erection(IEC 60079-14:2007)Termo de Adopção nº2009/ 0352, 2009-04-29EN 60229:2008 ( 1ª Edição )Electric cables - Tests on extruded oversheaths with a specialprotective function(IEC 60229:2007)Termo de Adopção nº2009/ 0353, 2009-04-29EN 60238:2004 /A 1:2008 ( 5ª Edição )Edison screw lampholders(IEC 60238:2004/A1:2008)Termo de Adopção nº2009/ 0354, 2009-04-29EN 60255-22-3:2008 ( 2ª Edição )Measuring relays and protection equipment Part 22-3: Electricaldisturbance tests - Radiated electromagnetic field immunity(IEC 60255-22-3:2007)Termo de Adopção nº2009/ 0355, 2009-04-29EN 60335-2-5:2003 /A 2:2008 ( 3ª Edição )Household and similar electrical appliances - Safety Part 2-5:Particular requirements for dishwashers(IEC 60335-2-5:2002/A2:2008)Termo de Adopção nº2009/ 0356, 2009-04-29EN 60335-2-8:2003 /A 2:2008 ( 3ª Edição )Household and similar electrical appliances - Safety Part 2-8:Particular requirements for shavers, hair clippers and similarappliances(IEC 60335-2-8:2002/A2:2008)Termo de Adopção nº2009/ 0357, 2009-04-29EN 60335-2-14:2006 /A 1:2008 ( 4ª Edição )Household and similar electrical appliances - Safety Part 2-14:Particular requirements for kitchen machines(IEC 60335-2-14:2006/A1:2008)Termo de Adopção nº2009/ 0358, 2009-04-29EN 60335-2-15:2002 /A 2:2008 ( 3ª Edição )Household and similar electrical appliances - Safety Part 2-15:Particular requirements for appliances for heating liquids(IEC 60335-2-15:2002/A2:2008)Termo de Adopção nº2009/ 0359, 2009-04-29EN 60335-2-43:2003 /A 2:2008 ( 3ª Edição )Household and similar electrical appliances - Safety Part 2-43:Particular requirements for clothes dryers and towel rails(IEC 60335-2-43:2002/A2:2008)Termo de Adopção nº2009/ 0360, 2009-04-29EN 60335-2-60:2003 /A 2:2008 ( 3ª Edição )Household and similar electrical appliances - Safety Part 2-60:Particular requirements for whirlpool baths and whirlpool spas(IEC 60335-2-60:2002/A2:2008)Termo de Adopção nº2009/ 0361, 2009-04-29EN 60335-2-61:2003 /A 2:2008 ( 2ª Edição )Household and similar electrical appliances - Safety Part 2-61:Particular requirements for thermal-storage room heaters(IEC 60335-2-61:2002/A2:2008)Termo de Adopção nº2009/ 0362, 2009-04-29EN 60335-2-75:2004 /A 2:2008 ( 2ª Edição )Household and similar electrical appliances - Safety Part 2-75:Particular requirements for commercial dispensing appliances andvending machines(IEC 60335-2-75:2002/A2:2008)Termo de Adopção nº2009/ 0363, 2009-04-29EN 60335-2-98:2003 /A 2:2008 ( 2ª Edição )Household and similar electrical appliances - Safety Part 2-98:Particular requirements for humidifiers(IEC 60335-2-98:2002/A2:2008)Termo de Adopção nº2009/ 0364, 2009-04-29EN 60399:2004 /A 1:2008 ( 2ª Edição )Barrel thread for lampholders with shade holder ring(IEC 60399:2004/A1:2008)Termo de Adopção nº2009/ 0365, 2009-04-29EN 60400:2008 ( 6ª Edição )Lampholders for tubular fluorescent lamps and starterholders(IEC 60400:2008)Termo de Adopção nº2009/ 0366, 2009-04-29EN 60512-16-3:2008 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part16-3: Mechanical tests on contacts and terminations - Test 16c:Contact-bending strength(IEC 60512-16-3:2008)Termo de Adopção nº2009/ 0367, 2009-04-29EN 60512-16-5:2008 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part16-5: Mechanical tests on contacts and terminations - Test 16e:Gauge retention force (resilient contacts)(IEC 60512-16-5:2008)Termo de Adopção nº2009/ 0368, 2009-04-29EN 60512-16-6:2008 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part16-6: Mechanical tests on contacts and terminations - Test 16f:Robustness of terminations(IEC 60516-6:2008)Termo de Adopção nº2009/ 0369, 2009-04-29EN 60512-16-7:2008 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part16-7: Mechanical tests on contacts and terminations - Test 16g:Measurement of contact deformation after crimping(IEC 60512-16-7:2008)Termo de Adopção nº2009/ 0370, 2009-04-29EN 60512-16-14:2008 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part16-14: Mechanical tests on contacts and terminations - Test 16n:Bending strength fixed male tabs(IEC 60512-16-14:2008)Termo de Adopção nº2009/ 0371, 2009-04-29EN 60512-16-16:2008 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part16-16: Mechanical tests on contacts and terminations - Test 16p:Torsional strength, fixed male tabs(IEC 60512-16-16:2008)Termo de Adopção nº2009/ 0372, 2009-04-29Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>EN 60512-16-17:2008 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part16-17: Mechanical tests on contacts and terminations - Test 16q:Tensile and compressive strength, fixed male tabs(IEC 60512-16-17:2008)Termo de Adopção nº2009/ 0373, 2009-04-29EN 60626-3:2008 ( 2ª Edição )Combined flexible materials for electrical insulation Part 3:Specifications for individual materials(IEC 60626-3:2008)Termo de Adopção nº2009/ 0374, 2009-04-29EN 60641-3-1:2008 ( 2ª Edição )Pressboard and presspaper for electrical purposes Part 3:Specifications for individual materials Sheet 1: Requirements forpressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1,B.4.3, B.5.1, B.5.3 and B.6.1(IEC 60641-3-1:2008)Termo de Adopção nº2009/ 0375, 2009-04-29EN 60730-1:2000 /A 2:2008 ( 3ª Edição )Automatic electrical controls for household and similar use Part 1:General requirements(IEC 60730-1:1999/A2:2007, modif)Termo de Adopção nº2009/ 0588, 2009-04-29EN 60751:2008 ( 2ª Edição )Industrial platinum resistance thermometers and platinumtemperature sensors(IEC 60751:2008)Termo de Adopção nº2009/ 0376, 2009-04-29EN 60794-2-41:2008 ( 1ª Edição )Optical fibre cables Part 2-41: Indoor cables - Productspecification for simplex and duplex buffered A4 fibres(IEC 60794-2-41:2008)Termo de Adopção nº2009/ 0377, 2009-04-29EN 60810:2003 /A 1:2008 ( 2ª Edição )Lamps for road vehicles - Performance requirements(IEC 60810:2003/A1:2008)Termo de Adopção nº2009/ 0589, 2009-04-29EN 60825-4:2006 /A 1:2008 ( 2ª Edição )Safety of laser produts Part 4: Laser guards(IEC 60825-4:2006/A1:2008)Termo de Adopção nº2009/ 0590, 2009-04-29EN 60838-1:2004 /A 1:2008 ( 3ª Edição )Miscellaneous lampholders Part 1: General requirements and tests(IEC 60838-1:2004/A1:2008)Termo de Adopção nº2009/ 0378, 2009-04-29EN 60851-5:2008 ( 2ª Edição )Winding wires - Test methods Part 5: Electrical properties(IEC 60851-5:2008)Termo de Adopção nº2009/ 0379, 2009-04-29EN 61000-3-3:2008 ( 2ª Edição )Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitationof voltage changes, voltage flutuations and flicker in publiclow-voltage supply systems, for equipment with rated current <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>for distribution management Part 13: CIM RDF Model exchangeformat for distribution(IEC 61968-13:2008)Termo de Adopção nº2009/ 0597, 2009-04-29EN 62040-1:2008 ( 2ª Edição )Uninterruptiblepower systems (UPS) Part 1: General and safetyrequirements for UPS(IEC 62040-1:208 + corrigendum August 2008)Termo de Adopção nº2009/ 0598, 2009-04-29EN 62227:2008 ( 1ª Edição )Multimedia home server systems -Digital rights permission code(IEC 62227:2008)Termo de Adopção nº2009/ 0599, 2009-04-29EN 62288:2008 ( 1ª Edição )Maritime navigation and radiocommunication equipment and systems-Presentation of navigation-related information on shipbornenavigational displays - General requirements, methods of testing andrequired test results(IEC 62288:2008)Termo de Adopção nº2009/ 0386, 2009-04-29EN 62317-14:2008 ( 1ª Edição )Ferrite cores - Dimensions Part 14: EFD-cores for use in powersupply applications(IEC 62317-14:2008)Termo de Adopção nº2009/ 0600, 2009-04-29EN 62428:2008 ( 1ª Edição )Electric power engineering - Modal components in three-phasea.c.systems - Quantities and transformations(IEC 62428:2008)Termo de Adopção nº2009/ 0387, 2009-04-29EN 62460:2008 ( 2008ª Edição )Temperature - Electromotive force (EMF) tables for pure-elementthermocouple combinations(IEC 62460:2008)Termo de Adopção nº2009/ 0388, 2009-04-29EN 300086-1:2008 ( V1.3.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Radio equipment with an internal or externalRF connector intended primarily for analogue speech Part 1:Technical characteristics and methods of measurementTermo de Adopção nº2009/ 0601, 2009-04-29EN 300086-2:2008 ( V1.2.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Radio equipment with an internal or externalRF connector intended primarily for analogue speech; Part 2:Harmonized EN covering essential requirements under article 3.2of the R&TTE DirectiveTermo de Adopção nº2009/ 0602, 2009-04-29EN 300392-9:2008 ( V1.3.2 )Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) Part 9:General requirements for supplementary serviceTermo de Adopção nº2009/ 0527, 2009-04-29EN 301166-1:2008 ( V1.3.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Radio equipment for analogue and/or digitalcommunication (speech and/or data) and operating on narrow bandchannels and having an antenna connector Part 1: Technicalcharacteristics and methods of measurementTermo de Adopção nº2009/ 0528, 2009-04-29EN 301166-2:2008 ( V1.2.2 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Land Mobile Service; Radio equipment for analogue and/or digitalcommunication (speech and/or data) and operating on narrow bandchannels and having an antenna connector Part 2: Harmonized ENcovering essential requirements of article 3.2 of the R&TTEDirectiveTermo de Adopção nº2009/ 0529, 2009-04-29EN 301489-6:2008 ( V1.3.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipmentand services Part 6: Specific conditions for Digital EnhancedCordless Telecommunications (DECT) equipment1 deliverable in totalTermo de Adopção nº2009/ 0530, 2009-04-29EN 301489-12:2008 ( V2.2.2 )Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipmentand services Part 12: Specific conditions for Very Small ApertureTerminal, Satellite Interactive Earth Stations operated in thefrequency ranges between 4 GHz and 30 GHz in the Fixed SatelliteService (FSS)Termo de Adopção nº2009/ 0603, 2009-04-29EN 302571:2008 ( V1.1.1 )Intelligent Transport Systems (ITS); Radiocommunicationsequipment operating in the 5 855 MHz to 5 925 MHz frequencyband; Harmonized EN covering the essential requirements of article3.2 of the R&TTE DirectiveTermo de Adopção nº2009/ 0604, 2009-04-29EN ISO 148-2:2008 ( 1ª Edição )Metallic materials Charpy pendulum impact test Part 2: Verificationof testing machines(ISO 148-2:2008)Termo de Adopção nº2009/ 0554, 2009-04-29EN ISO 148-3:2008 ( 1ª Edição )Metallic materials Charpy pendulum impact test Part 3: Preparationand characterization of Charpy V-notch test pieces for indirectverification of pendulum impact machines (ISO 148-3:2008)Termo de Adopção nº2009/ 0555, 2009-04-29EN ISO 663:2008 ( 3ª Edição )Animal and vegetable fats and oils Determination of insolubleimpurities content(ISO 663:2007)Termo de Adopção nº2009/ 0479, 2009-04-29EN ISO 945-1:2008 ( 1ª Edição )Microstructure of cast irons Part 1: Graphite classification by visualanalysis(ISO 945-1:2008)Termo de Adopção nº2009/ 0480, 2009-04-29EN ISO 1403:2008 ( 2ª Edição )Rubber hoses, textile-reinforced, for general-purpose waterapplications Specification (ISO 1403:2005)Termo de Adopção nº2009/ 0481, 2009-04-29EN ISO 1924-2:2008 ( 2ª Edição )Paper and board Determination of tensile properties Part 2:Constant rate of elongation method (20 mm/min)(ISO 1924-2:2008)Termo de Adopção nº2009/ 0556, 2009-04-29Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>EN ISO 2081:2008 ( 1ª Edição )Metallic and other inorganic coatings Electroplated coatings of zincwith supplementary treatments on iron or steel(ISO 2081:2008)Termo de Adopção nº2009/ 0557, 2009-04-29EN ISO 2082:2008 ( 1ª Edição )Metallic and other inorganic coatings Electroplated coatings ofcadmium with supplementary treatments on iron or steel(ISO 2082:2008)Termo de Adopção nº2009/ 0558, 2009-04-29EN ISO 2320:2008 ( 2ª Edição )Prevailing torque type steel nuts Mechanical and performanceproperties(ISO 2320:2008)Termo de Adopção nº2009/ 0482, 2009-04-29EN ISO 2398:2008 ( 2ª Edição )Rubber hoses, textile-reinforced, for compressed air Specification(ISO 2398:2006)Termo de Adopção nº2009/ 0483, 2009-04-29EN ISO 2439:2008 ( 2ª Edição )Flexible cellular polymeric materials Determination of hardness(indentation technique)(ISO 2439:2008)Termo de Adopção nº2009/ 0559, 2009-04-29EN ISO 2898-2:2008 ( 2ª Edição )Plastics Plasticized poly(vinyl chloride) (PVC-P) moulding andextrusion materials Part 2: Preparation of test specimens anddetermination of properties(ISO 2898-2:2008)Termo de Adopção nº2009/ 0484, 2009-04-29EN ISO 3452-5:2008 ( 1ª Edição )Non-destructive testing Penetrant testing Part 5: Penetrant testingat temperatures higher than 50 degrees C (ISO 3452-5:2008)Termo de Adopção nº2009/ 0560, 2009-04-29EN ISO 3452-6:2008 ( 1ª Edição )Non-destructive testing Penetrant testing Part 6: Penetrant testingat temperatures lower than 10 degrees C (ISO 3452-6:2008)Termo de Adopção nº2009/ 0561, 2009-04-29EN ISO 3822-1:1999 /A 1:2008 ( 1ª Edição )Acoustics Laboratory tests on noise emission from appliances andequipment used in water supply installations Part 1: Method ofmeasurement - Amendment 1: Measurement uncertainty (ISO3822-1:1999/Amd 1:2008)Termo de Adopção nº2009/ 0562, 2009-04-29EN ISO 3861:2008 ( 2ª Edição )Rubber hoses for sand and grit blasting Specification(ISO 3861:2005)Termo de Adopção nº2009/ 0485, 2009-04-29EN ISO 3960:2008 ( 3ª Edição )Animal and vegetable fats and oils Determination of peroxide valueIodometric (visual) endpoint determination(ISO 3960:2007)Termo de Adopção nº2009/ 0486, 2009-04-29EN ISO 4641:2008 ( 1ª Edição )Rubber hoses and hose assemblies for water suction and dischargeSpecification (ISO 4641:2005)Termo de Adopção nº2009/ 0487, 2009-04-29EN ISO 6224:2008 ( 2ª Edição )Thermoplastics hoses, textile-reinforced, for general-purpose waterapplications Specification (ISO 6224:2005Termo de Adopção nº2009/ 0488, 2009-04-29EN ISO 6802:2008 ( 1ª Edição )Rubber and plastics hoses and hose assemblies with wirereinforcements Hydraulic impulse test with flexing(ISO 6802:2005)Termo de Adopção nº2009/ 0489, 2009-04-29EN ISO 6886:2008 ( 1ª Edição )Animal and vegetable fats and oils Determination of oxidativestability (accelerated oxidation test)(ISO 6886:2006)Termo de Adopção nº2009/ 0490, 2009-04-29EN ISO 7263:2008 ( 2ª Edição )Corrugating medium Determination of the flat crush resistance afterlaboratory fluting(ISO 7263:2008Termo de Adopção nº2009/ 0564, 2009-04-29EN ISO 7405:2008 ( 2ª Edição )Dentistry Evaluation of biocompatibility of medical devices used indentistry(ISO 7405:2008)Termo de Adopção nº2009/ 0565, 2009-04-29EN ISO 8067:2008 ( 2ª Edição )Flexible cellular polymeric materials Determination of tear strength(ISO 8067:2008)Termo de Adopção nº2009/ 0566, 2009-04-29EN ISO 9241-300:2008 ( 1ª Edição )Ergonomics of human-system interaction Part 300: Introduction toelectronic visual display requirements(ISO 9241-300:2008)Termo de Adopção nº2009/ 0491, 2009-04-29EN ISO 9241-302:2008 ( 1ª Edição )Ergonomics of human-system interaction Part 302: Terminology forelectronic visual displays(ISO 9241-302:2008)Termo de Adopção nº2009/ 0492, 2009-04-29EN ISO 9241-303:2008 ( 1ª Edição )Ergonomics of human-system interaction Part 303: Requirements forelectronic visual displays(ISO 9241-303:2008)Termo de Adopção nº2009/ 0493, 2009-04-29EN ISO 9241-304:2008 ( 1ª Edição )Ergonomics of human-system interaction Part 304: User performancetest methods for electronic visual displays(ISO 9241-304:2008)Termo de Adopção nº2009/ 0494, 2009-04-29EN ISO 9241-305:2008 ( 1ª Edição )Ergonomics of human-system interaction Part 305: Optical laboratorytest methods for electronic visual displays(ISO 9241- 305:2008)Termo de Adopção nº2009/ 0495, 2009-04-29EN ISO 9241-306:2008 ( 1ª Edição )Ergonomics of human-system interaction Part 306: Field assessmentmethods for electronic visual displays(ISO 9241- 306:2008)Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>Termo de Adopção nº2009/ 0496, 2009-04-29EN ISO 9241-307:2008 ( 1ª Edição )Ergonomics of human-system interaction Part 307: Analysis andcompliance test methods for electronic visual displays(ISO 9241-307:2008)Termo de Adopção nº2009/ 0497, 2009-04-29EN ISO 10058-1:2008 ( 1ª Edição )Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method) Part 1: Apparatus,reagents, dissolution and determination of gravimetric silica(ISO 10058-1:2008)Termo de Adopção nº2009/ 0567, 2009-04-29EN ISO 10058-2:2008 ( 1ª Edição )Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method) Part 2: Wet chemicalanalysis (ISO 10058-2:2008)Termo de Adopção nº2009/ 0568, 2009-04-29EN ISO 10058-3:2008 ( 1ª Edição )Chemical analysis of magnesite and dolomite refractory products(alternative to the X-ray fluorescence method) Part 3: Flameatomic absorption spectrophotometry (FAAS) and inductivelycoupled plasma atomic emission spectrometry (ICPAES) (ISO10058-3:2008)Termo de Adopção nº2009/ 0569, 2009-04-29EN ISO 10218-1:2008 ( 2ª Edição )Robots for industrial environments Safety requirements Part 1:Robot(ISO 10218-1:2006, including Cor 1:2007)Termo de Adopção nº2009/ 0570, 2009-04-29EN ISO 10414-1:2008 ( 1ª Edição )Petroleum and natural gas industries Field testing of drillingfluids Part 1: Water-based fluids (ISO 10414-1:2008)Termo de Adopção nº2009/ 0498, 2009-04-29EN ISO 10472-5:2008 ( 2ª Edição )Safety requirements for industrial laundry machinery Part 5:Flatwork ironers, feeders and folders (ISO 10472-5:1997)Termo de Adopção nº2009/ 0499, 2009-04-29EN ISO 10472-6:2008 ( 2ª Edição )Safety requirements for industrial laundry machinery Part 6:Ironing and fusing presses (ISO 10472-6:1997)Termo de Adopção nº2009/ 0500, 2009-04-29EN ISO 11348-1:2008 ( 2ª Edição )Water quality Determination of the inhibitory effect of watersamples on the light emission of Vibrio fischeri (Luminescentbacteria test) Part 1: Method using freshly prepared bacteria(ISO 11348-1:2007)Termo de Adopção nº2009/ 0501, 2009-04-29EN ISO 11348-2:2008 ( 2ª Edição )Water quality Determination of the inhibitory effect of watersamples on the light emission of Vibrio fischeri (Luminescentbacteria test) Part 2: Method using liquid-dried bacteria(ISO 11348-2:2007)Termo de Adopção nº2009/ 0502, 2009-04-29EN ISO 11348-3:2008 ( 2ª Edição )Water quality Determination of the inhibitory effect of watersamples on the light emission of Vibrio fischeri (Luminescentbacteria test) Part 3: Method using freeze-dried bacteria(ISO 11348-3:2007)Termo de Adopção nº2009/ 0503, 2009-04-29EN ISO 11553-1:2008 ( 2ª Edição )Safety of machinery Laser processing machines Part 1: Generalsafety requirements(ISO 11553-1:2005)Termo de Adopção nº2009/ 0504, 2009-04-29EN ISO 11553-2:2008 ( 2ª Edição )Safety of machinery Laser processing machines Part 2: Safetyrequirements for hand-held laser processing devices(ISO 11553-2:2007)Termo de Adopção nº2009/ 0505, 2009-04-29EN ISO 11612:2008 ( 1ª Edição )Protective clothing Clothing to protect against heat and flame(ISO 11612:2008)Termo de Adopção nº2009/ 0506, 2009-04-29EN ISO 11680-1:2008 ( 2ª Edição )Machinery for forestry Safety requirements and testing forpolemounted powered pruners Part 1: Units fitted with an integralcombustion engine(ISO 11680-1:2000)Termo de Adopção nº2009/ 0507, 2009-04-29EN ISO 11680-2:2008 ( 2ª Edição )Machinery for forestry Safety requirements and testing forpolemounted powered pruners Part 2: Units for use with a backpackpower source(ISO 11680-2:2000)Termo de Adopção nº2009/ 0508, 2009-04-29EN ISO 11681-1:2008 ( 2ª Edição )Machinery for forestry Portable chain-saw safety requirements andtesting Part 1: Chain-saws for forest service(ISO 11681-1:2004, including Amd 1:2007)Termo de Adopção nº2009/ 0509, 2009-04-29EN ISO 11681-2:2008 ( 3ª Edição )Machinery for forestry Portable chain-saw safety requirements andtesting Part 2: Chain-saws for tree service(ISO 11681-2:2006)Termo de Adopção nº2009/ 0510, 2009-04-29EN ISO 11961:2008 ( 2ª Edição )Petroleum and natural gas industries Steel drill pipe (ISO11961:2008)Termo de Adopção nº2009/ 0511, 2009-04-29EN ISO 11979-4:2008 ( 2ª Edição )Ophthalmic implants Intraocular lenses Part 4: Labelling andinformation(ISO 11979-4:2008)Termo de Adopção nº2009/ 0571, 2009-04-29EN ISO 12777-1:1996 /A 1:2008 ( 1ª Edição )Methods of test for pallet joints Part 1: Determination of bendingresistance of pallet nails, other dowel-type fasteners andstaples Amendment 1 (ISO 12777-1:1994/Amd 1:2008)Termo de Adopção nº2009/ 0512, 2009-04-29EN ISO 12866:1999 /A 1:2008 ( 1ª Edição )Ophthalmic instruments Perimeters Amendment 1 (ISO12866:1999/Amd1:2008)Termo de Adopção nº2009/ 0513, 2009-04-29EN ISO 13500:2008 ( 3ª Edição )Petroleum and natural gas industries Drilling fluid materialsLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>Specifications and tests(ISO 13500:2008)Termo de Adopção nº2009/ 0514, 2009-04-29EN ISO 14183:2008 ( 1ª Edição )Animal feeding stuffs Determination of monensin, narasin andsalinomycin contents Liquid chromatographic method usingpost-column derivatization(ISO 14183:2005)Termo de Adopção nº2009/ 0515, 2009-04-29EN ISO 14310:2008 ( 2ª Edição )Petroleum and natural gas industries Downhole equipment Packersand bridge plugs(ISO 14310:2008)Termo de Adopção nº2009/ 0516, 2009-04-29EN ISO 14691:2008 ( 2ª Edição )Petroleum, petrochemical and natural gas industries Flexiblecouplings for mechanical power transmission General-purposeapplications (ISO 14691:2008)Termo de Adopção nº2009/ 0572, 2009-04-29EN ISO 15011-4:2006 /A 1:2008 ( 1ª Edição )Health and safety in welding and allied processes Laboratorymethod for sampling fume and gases Part 4: Fume data sheets- Amendment 1 (ISO 15011-4:2006/Amd 1:2008)Termo de Adopção nº2009/ 0573, 2009-04-29EN ISO 15088:2008 ( 1ª Edição )Water quality Determination of the acute toxicity of waste water tozebrafish eggs (Danio rerio)(ISO 15088:2007)Termo de Adopção nº2009/ 0517, 2009-04-29EN ISO 15303:2008 ( 1ª Edição )Animal and vegetable fats and oils Detection and identification ofa volatile organic contaminant by GC/MS(ISO 15303:2001)Termo de Adopção nº2009/ 0518, 2009-04-29EN ISO 15783:2003 /A 1:2008 ( 1ª Edição )Seal-less rotodynamic pumps Class II - Specification -Amendment 1 (ISO 15783:2003/Amd 1:2008)Termo de Adopção nº2009/ 0519, 2009-04-29EN ISO 16061:2008 ( 1ª Edição )Instrumentation for use in association with non-active surgicalimplants General requirements(ISO 16061:2008)Termo de Adopção nº2009/ 0574, 2009-04-29EN ISO 16634-1:2008 ( 1ª Edição )Food products Determination of the total nitrogen content bycombustion according to the Dumas principle and calculation ofthe crude protein content Part 1: Oilseeds and animal feeding stuffs(ISO 16634-1:2008)Termo de Adopção nº2009/ 0520, 2009-04-29EN ISO 20565-1:2008 ( 1ª Edição )Chemical analysis of chrome-bearing refractory products andchrome-bearing raw materials (alternative to the X-ray fluorescencemethod) Part 1: Apparatus, reagents, dissolution and determinationof gravimetric silica(ISO 20565-1:2008)Termo de Adopção nº2009/ 0575, 2009-04-29EN ISO 20565-2:2008 ( 1ª Edição )Chemical analysis of chrome-bearing refractory products andchrome-bearing raw materials (alternative to the X-ray fluorescencemethod) Part 2: Wet chemical analysis(ISO 20565-2:2008)Termo de Adopção nº2009/ 0576, 2009-04-29EN ISO 20565-3:2008 ( 1ª Edição )Chemical analysis of chrome-bearing refractory products andchrome-bearing raw materials (alternative to the X-rayfluorescence method) Part 3: Flame atomic absorptionspectrometry (FAAS) and inductively coupled plasma atomicemission spectrometry (ICP-AES) (ISO 20565-3:2008)Termo de Adopção nº2009/ 0577, 2009-04-29EN ISO 22867:2008 ( 2ª Edição )Forestry machinery Vibration test code for portable hand-heldmachines with internal combustion engine Vibration at the handles(ISO 22867:2004, including Cor 1:2006)Termo de Adopção nº2009/ 0521, 2009-04-29EN ISO 22868:2008 ( 3ª Edição )Forestry machinery Noise test code for portable hand-heldmachines with internal combustion engine Engineering method(Grade 2 accuracy)(ISO 22868:2005)Termo de Adopção nº2009/ 0522, 2009-04-29EN ISO 23275-1:2008 ( 1ª Edição )Animal and vegetable fats and oils Cocoa butter equivalents in cocoabutter and plain chocolate Part 1: Determination of the presence ofcocoa butter equivalents(ISO 23275-1:2006)Termo de Adopção nº2009/ 0523, 2009-04-29EN ISO 23275-2:2008 ( 1ª Edição )Animal and vegetable fats and oils Cocoa butter equivalents in cocoabutter and plain chocolate Part 2: Quantification of cocoa butterequivalents(ISO 23275-2:2006)Termo de Adopção nº2009/ 0524, 2009-04-29EN ISO 24998:2008 ( 1ª Edição )Plastics laboratory ware Single-use Petri dishes for microbiologicalprocedures(ISO 24998:2008)Termo de Adopção nº2009/ 0525, 2009-04-29EN ISO 25457:2008 ( 1ª Edição )Petroleum, petrochemical and natural gas industries Flare de Flaredetails for general refinery and petrochemical service(ISO 25457:2008)Termo de Adopção nº2009/ 0578, 2009-04-29EN ISO 25619-1:2008 ( 1ª Edição )Geosynthetics Determination of compression behaviour Part 1:Compressive creep properties(ISO 25619-1:2008)Termo de Adopção nº2009/ 0579, 2009-04-29EN ISO 25619-2:2008 ( 1ª Edição )Geosynthetics Determination of compression behaviour Part 2:Determination of short-term compression behaviour(ISO 25619-2:2008)Termo de Adopção nº2009/ 0580, 2009-04-29EN ISO 26945:2008 ( 1ª Edição )Metallic and other inorganic coatings Electrodeposited coatings oftin-cobalt alloy(ISO 26945:2008)Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>Termo de Adopção nº2009/ 0581, 2009-04-29EN ISO 27107:2008 ( 1ª Edição )Animal and vegetable fats and oils Determination of peroxide valuePotentiometric end-point determination(ISO 27107:2008)Termo de Adopção nº2009/ 0526, 2009-04-29EN ISO 28941-1:2008 ( 1ª Edição )Plastics Poly(phenylene ether) (PPE) moulding and extrusionmaterials Part 1: Designation system and basis for specifications(ISO 28941-1:2008)Termo de Adopção nº2009/ 0582, 2009-04-29Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>2. Normas Europeias publicadas2.1 CENNormas Europeias aprovadas na área não electrotécnica pelo Comité Europeu de Normalização (CEN), e pelo ComitéEuropeu para a Normalização do Ferro e do Aço (ECISS).Para cada referência, menciona-se o comité técnico, a designação codificada e o título.TC 12EN ISO 10418:2003 /AC :2009 ( Ed. 1 )Petroleum and natural gas industries Offshore productioninstallations Analysis, design, installation and testing of basicsurface process safety systems(ISO 10418:2003)/Cor 1:2008)TC 12EN ISO 17078-3:2009 ( Ed. 1 )Petroleum and natural gas industries Drilling and productionequipment Part 3: Running tools, pulling tools and kick-over toolsand latches for side-pocket mandrels(ISO 17078-3:2009)TC 12EN ISO 23936-1:2009 ( Ed. 1 )Petroleum, petrochemical and natural gas industries Nonmetallicmaterials in contact with media related to oil and gas productionPart 1: Thermoplastics (ISO 23936-1:2009)TC 19EN 590:2009 ( Ed. 5 )Automotive fuels Diesel Requirements and test methodsTC 19EN 15692:2009 ( Ed. 1 )Ethanol as a blending component for petrol Determination of watercontent Karl Fischer potentiometric titration methodTC 19EN 15721:2009 ( Ed. 1 )Ethanol as a blending component for petrol Determination of higheralcohols, methanol and volatile impurities Gas chromatographicmethodTC 19EN 15769:2009 ( Ed. 1 )Ethanol as a blending component of petrol Determination ofappearance Visual methodTC 19EN ISO 5163:2005 /AC :2009 ( Ed. 1 )Petroleum products Determination of knock characteristics ofmotor and aviation fuels Motor method (ISO 5163:2005/Cor1:2008)TC 23EN ISO 13769:2009 ( Ed. 2 )Gas cylinders Stamp marking (ISO 13769:2007)TC 52EN 71-1:2005+A8:2009 ( Ed. 1 )Safety of toys Part 1: Mechanical and physical propertiesTC 55EN ISO 20795-1:2008 /AC :2009 ( Ed. 1 )Dentistry Base polymers Part 1: Denture base polymers (ISO 20795-1:2008/Cor 1:2009)TC 85EN 379-:2003+A1:2009 ( Ed. 1 )Personal eye-protection Automatic welding filtersTC 104EN 12350-6:2009 ( Ed. 2 )Testing fresh concrete Part 6: DensityTC 104EN 12350-7:2009 ( Ed. 2 )Testing fresh concrete Part 7: Air content - Pressure methodsTC 104EN 12390-2:2009 ( Ed. 2 )Testing hardened concrete Part 2: Making and curing specimens forstrength testsTC 114EN 1760-1:1997+A1:2009 ( Ed. 1 )Safety of machinery Pressure sensitive protective devicesPart 1: General principles for the design and testing of pressuresensitive mats and pressure sensitive floorsTC 114EN 1760-2:2001+A1:2009 ( Ed. 1 )Safety of machinery Pressure sensitive protective devices Part 2:General principles for the design and testing of pressure sensitiveedges and pressure sensitive barsTC 114EN 1760-3:2004+A1:2009 ( Ed. 1 )Safety of machinery Pressure sensitive protective devicesPart 3: General principles for the design and testing of pressuresensitive bumpers, plates, wires and similar devicesTC 114EN ISO 13849-1:2008 /AC :2009Safety of machinery Safety-related parts of control systems Part 1:General principles for design(ISO 13849-1:2006/Cor 1:2009)TC 121CEN/TR 15068:2009 ( Ed. 1 )Gas welding equipment Measurement of noise emitted by blowpipefor welding, cutting, heating, brazing and soldering MeasurementmethodLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>TC 121EN ISO 5182:2009 ( Ed. 1 )Resistance welding Materials for electrodes and ancillary equipment(ISO 5182:2008)TC 121EN ISO 9902-5:2001 /A 1:2009 ( Ed. 1 )Textile machinery Noise test code Part 5: Weaving and knittingpreparatory machineryAmendment 1 (ISO 9902-5:2001/Amd 1:2009)TC 121EN ISO 24373:2009 ( Ed. 1 )Welding consumables Solid wires and rods for fusion welding ofcopper and copper alloys Classification (ISO 24373:2008)TC 123EN ISO 11810-1:2009 ( Ed. 2 )Lasers and laser-related equipment Test method and classification forthe laser resistance of surgical drapes and/or patient protectivecovers Part 1: Primary ignition and penetration(ISO 11810-1:2005)TC 124EN 409:2009 ( Ed. 2 )Timber structures Test methods Determination of the yield momentof dowel type fastenersTC 124EN 1380:2009 ( Ed. 2 )Timber structures Test methods Load bearing nails, screws, dowelsand boltsTC 126EN 12354-5:2009 ( Ed. 1 )Building acoustics Estimation of acoustic performance of buildingfrom the performance of elements Part 5: Sounds levels due to theservice equipmentTC 126EN ISO 140-14:2004 /AC :2009 ( Ed. 1 )Acoustics Measurement of sound insulation in buildings and ofbuilding elements Part 14: Guidelines for special situations in thefield(ISO 140-14:2004/Cor 1:2007)TC 132EN 573-3:2009 ( Ed. 4 )Aluminium and aluminium alloys Chemical composition and form ofwrought products Part 3: Chemical composition and form ofproductsTC 133CEN/TS 15616:2009 ( Ed. 1 )Copper and copper alloys Determination of cadmium contentFlame atomic absorption spectrometric method (FAASTC 133CEN/TS 15703-1:2009 ( Ed. 1 )Copper and copper alloys Determination of manganese content Part1: Spectrophotometric methodTC 133EN 723:2009 ( Ed. 2 )Copper and copper alloys Combustion method for determination ofthe carbon content on the inner surface of copper tubes or fittingsTC 136EN 13613:2009 ( Ed. 2 )Roller sports equipment Skateboards Safety requirements and testsmethodsTC 136EN 13843:2009 ( Ed. 2 )Roller sports equipment Inline-skates Safety requirements and testmethodsTC 136EN 15638:2009 ( Ed. 1 )Ice skates Safety requirements and test methodsTC 138CEN ISO/TS 21432:2005 /AC :2009 ( Ed. 1 )Non-destructive testing Standards test method for determiningresidual stresses by neutron diffraction(ISO 21432:2005/Cor 1:2008)TC 143EN 13128-:2001+A2:2009 ( Ed. 1 )Safety of machine tools Milling machines (including boringmachines)TC 144EN 13683-:2003+A1:2009 ( Ed. 1 )Tips for assistive products for walking Requirements and testmethods Part 1: Friction of tips (ISO 24415-1:2009)TC 144EN 14910-:2007+A1:2009 ( Ed. 1 )Garden equipment Walk-behind combustion engine poweredtrimmers SafetyTC 147EN 13001-1:2004+A1:2009 ( Ed. 1 )Cranes General design Part 1: General principles and requirementsTC 147EN 13155-:2003+A2:2009 ( Ed. 1 )Cranes Safety Non-fixed load lifting attachmentsTC 151EN 500-4.2006+A1:2009 ( Ed. 1 )Mobile road construction machinery Safety Part 4: Specificrequirements for compaction machinesTC 151EN 12348-:2000+A1:2009 ( Ed. 1 )Core drilling machines on stand SafetyTC 151EN 12418-2000+A1:2009 ( Ed. 1 )Masonry and stone cutting-off machines for job site SafetyTC 151EN 13862-2001+A1:2009 ( Ed. 1 )Floor cutting-off machines SafetyTC 151EN 15027-:2007+A1:2009 ( Ed. 1 )Transportable wall saw and wire saw equipment for job site SafetyTC 153EN 13732-:2002+A2:2009 ( Ed. 1 )Food processing machinery Bulk milk coolers on farmsRequirements for construction, performance, suitability for use,safety and hygieneTC 153EN 14958-:2006+A1:2009 ( Ed. 1 )Food processing machinery Machinery for grinding and processingflour and semolina Safety and hygiene requirementsLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>TC 154EN 933-11:2009 ( Ed. 1 )Tests for geometrical properties of aggregates Part 11: Classificationtest for the constituents of coarse recycled aggregateTC 170EN ISO 11979-8:2009 ( Ed. 2 )Ophthalmic implants Intraocular lenses Part 8: Fundamentalrequirements(ISO 11979-8:2006)TC 170EN ISO 11981:1999 /AC :2009 ( Ed. 1 )Ophthalmic optics Contact lenses and contact lens care productsDetermination of physical compatibility of contact lens careproducts with contact lenses(ISO 11981:1999/Cor 1:2005)TC 170EN ISO 12870:2009 ( Ed. 3 )Ophthalmic optics Spectacle frames Requirements and test methods(ISO 12870:2004)TC 170EN ISO 14534:2009 ( Ed. 3 )Ophthalmic optics Contact lenses and contact lens care productsFundamental requirements (ISO 14534:2002)TC 170EN ISO 14889:2009 ( Ed. 3 )Ophthalmic optics Spectacle lenses Fundamental requirements foruncut finished lenses(ISO 14889:2003)TC 170EN ISO 15004-1:2009 ( Ed. 2 )Ophthalmic instruments Fundamental requirements and test methodsPart 1: General requirements applicable to all ophthalmicinstruments(ISO 15004-1:2006)TC 175EN 1927-2:2008 /AC :2009 ( Ed. 1 )Qualitative classification of softwood round timber Part 2: PinesTC 182EN 378-2:2008+A1:2009 ( Ed. 1 )Refrigerating systems and heat pumps Safety and environmentalrequirements Part 2: Design, construction, testing, marking anddocumentationTC 184CEN/TS 15866:2009 ( Ed. 1 )Advanced technical ceramics Ceramic composites Determination ofthe thermal diffusivity of ceramic fibresTC 184CEN/TS 15867:2009 ( Ed. 1 )Advanced technical ceramics Ceramic composites Guide to thedetermination of the degree of misalignment in uniaxial mechanicaltestsTC 185EN ISO 898-1:2009 ( Ed. 2 )Mechanical properties of fasteners made of carbon steel and alloysteel Part 1: Bolts, screws and studs with specified property classes- Coarse thread and fine pitch thread(ISO 898-1:2009)TC 185EN ISO 10684:2004 /AC :2009 ( Ed. 1 )Fasteners Hot dip galvanized coatings(ISO 10684:2004/Cor 1:2008)TC 191EN 615:2009 ( Ed. 2 )Fire protection Fire extinguishing media Specifications for powders(other than class D powders)TC 191EN 12845-:2004+A2:2009 ( Ed. 1 )Fixed firefighting systems Automatic sprinkler systemsDesign, installation and maintenanceTC 193EN 15865:2009 ( Ed. 1 )Adhesives Determination of torque strength of anaerobic adhesiveson threaded fasteners(ISO 10964:1993 modified)TC 193EN 15870:2009 ( Ed. 1 )Adhesives Determination of tensile strength of butt joints(ISO 6922:1987 modified)TC 196EN 1889-2:2003+A1:2009 ( Ed. 1 )Machines for underground mines Mobile machines workingunderground - Safety Part 2: Rail locomotivesTC 196EN 12321-:2003+A1:2009 ( Ed. 1 )Underground mining machinery Specification for the safetyrequirements of armoured face conveyorsTC 197EN ISO 20361:2009 ( Ed. 1 )Liquid pumps and pump units Noise test code Grades 2 and 3 ofaccuracy(ISO 20361:2007)TC 202EN 869-2006+A1:2009 ( Ed. 1 )Safety of machinery Safety requirements for pressure metaldiecasting unitsTC 202EN 1248-:2001+A1:2009 ( Ed. 1 )Foundry machinery Safety requirements for abrasive blastingequipmentTC 204CEN ISO/TS 11135-2:2008 /AC :2009 ( Ed. 1 )Soil improvers and growing media Determination of quantity formaterials with particle size greater than 60 mmTC 204EN ISO 11137-2:2007 /AC :2009 ( Ed. 1 )Sterilization of health care products Radiation Part 2: Establishingthe sterilization dose(ISO 11137-2:2006/Cor 1:2009)TC 204EN ISO 11737-1:2006 /AC :2009 ( Ed. 1 )Sterilization of medical devices Microbiological methods Part 1:Determination of a population of microorganisms on products(ISO 11737-1:2006/Cor 1:2007)TC 205CEN/TR 15831:2009 ( Ed. 1 )Method for testing compression in medical hosieryLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>TC 207EN 581-2:2009 ( Ed. 1 )Outdoor furniture Seating and tables for camping, domestic andcontract use Part 2: Mechanical safety requirements and test methodsfor seatingTC 207EN 1335-2:2009 ( Ed. 2 )Office furniture Office work chair Part 2: Safety requirementsTC 207EN 1335-3:2009 ( Ed. 2 )Office furniture Office work chair Part 3: Test methodsTC 207EN 15706:2009 ( Ed. 1 )Hardware for furniture Strength and durability of slide fittings forsliding doors and roll frontsTC 211EN ISO 9612:2009 ( Ed. 1 )Acoustics Determination of occupational noise exposureEngineering method(ISO 9612:2009)TC 214EN ISO 9902-1:2001 /A 1:2009 ( Ed. 1 )Textile machinery Noise test code Part 1: Common requirements- Amendment 1 (ISO 9902-1:2001/Amd 1:2009)TC 214EN ISO 9902-2:2001 /A 1:2009 ( Ed. 1 )Textile machinery Noise test code Part 2: Spinning preparatory andspinning machinery - Amendment 1 (ISO 9902-2:2001/Amd 1:2009)TC 214EN ISO 9902-3:2001 /A 1:2009 ( Ed. 1 )Textile machinery Noise test code Part 3: Nonwoven machinery- Amendment 1 (ISO 9902-3:2001/Amd 1:2009)TC 214EN ISO 9902-4:2001 /A 1:2009 ( Ed. 1 )Textile machinery Noise test code Part 4: Yarn processing, cordageand rope manufacturing machinery- Amendment 1 (ISO 9902-4:2001/Amd 1:2009)TC 214EN ISO 9902-6:2001 /A 1:2009 ( Ed. 1 )Textile machinery Noise test code Part 6: Fabric manufacturingmachinery - Amendment 1 (ISO 9902-6:2001/Amd 1:2009)TC 214EN ISO 9902-7:2001 /A 1:2009 ( Ed. 1 )Textile machinery Noise test code Part 7: Dyeing and finishingmachinery - Amendment 1 (ISO 9902-7:2001/Amd 1:2009)TC 215EN 794-1:1997+A2:2009 ( Ed. 1 )Lung ventilators Part 1: Particular requirements for critical careventilatorsTC 215EN ISO 5360:2009 ( Ed. 2 )Anaesthetic vaporizers Agent-specific filling systems(ISO 5360:2006)TC 215EN ISO 5366-1:2009 ( Ed. 2 )Anaesthetic and respiratory equipment Tracheostomy tubes Part 1:Tubes and connectors for use in adults(ISO 5366-1:2000)TC 215EN ISO 7376:2009 ( Ed. 2 )Anaesthetic and respiratory equipment Laryngoscopes for trachealintubation(ISO 7376:2003)TC 215EN ISO 8185:2009 ( Ed. 3 )Respiratory tract humidifiers for medical use Particularrequirements for respiratory humidification systems(ISO 8185:2007)TC 215EN ISO 8359:2009 ( Ed. 2 )Oxygen concentrators for medical use Safety requirements(ISO 8359:1996)TC 215EN ISO 8835-2:2009 ( Ed. 2 )Inhalational anaesthesia systems Part 2: Anaesthetic breathingsystems(ISO 8835-2:2007)TC 215EN ISO 8835-4:2009 ( Ed. 2 )Inhalational anaesthesia systems Part 4: Anaesthetic vapour deliverydevices(ISO 8835-4:2004)TC 215EN ISO 8836:2009 ( Ed. 2 )Suction catheters for use in the respiratory tract(ISO 8836:2007, corrected version 2008-03-15)TC 215EN ISO 9360-1:2009 ( Ed. 2 )Anaesthetic and respiratory equipment Heat and moistureexchangers (HMEs) for humidifying respired gases in humans Part1: HMEs for use with minimum tidal volumes of 250 ml(ISO 9360-1:2000)TC 215EN ISO 9360-2:2009 ( Ed. 2 )Anaesthetic and respiratory equipment Heat and moistureexchangers (HMEs) for humidifying respired gases in humans Part2: HMEs for use with tracheostomized patients having minimumtidal volumes of 250 ml(ISO 9360-2:2001)TC 215EN ISO 9919:2009 ( Ed. 2 )Medical electrical equipment Particular requirements for the basicsafety and essential performance of pulse oximeter equipment formedical use (ISO 9919:2005)TC 215EN ISO 10651-2:2009 ( Ed. 2 )Lung ventilators for medical use Particular requirements for basicsafety and essential performance Part 2: Home care ventilators forventilator-dependent patients (ISO 10651-2:2004)TC 215EN ISO 10651-4:2009 ( Ed. 2 )Lung ventilators Part 4: Particular requirements for operatorpoweredresuscitators(ISO 10651-4:2002)TC 215Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>EN ISO 10651-6:2009 ( Ed. 2 )Lung ventilators for medical use Particular requirements for basicsafety and essential performance Part 6: Home-care ventilatorysupport devices(ISO 10651-6:2004)TC 215EN ISO 11197:2009 ( Ed. 2 )Medical supply units (ISO 11197:2004)TC 215EN ISO 14408:2009 ( Ed. 2 )Tracheal tubes designed for laser surgery Requirements formarking and accompanying information(ISO 14408:2005)TC 215EN ISO 18778:2009 ( Ed. 2 )Respiratory equipment Infant monitors Particular requirements(ISO 18778:2005)TC 215EN ISO 21647:2009 ( Ed. 2 )Medical electrical equipment Particular requirements for the basicsafety and essential performance of respiratory gas monitors(ISO 21647:2004, including Cor 1:2005)TC 223EN 15238:2006 /AC :2009 ( Ed. 1 )Soil improvers and growing media Determination of quantity formaterials with particle size greater than 60 mmTC 226EN 1463-1:2009 ( Ed. 2 )Road marking materials Retroreflecting road studs Part 1: Initialperformance requirementsTC 226EN 13422-:2004+A1:2009 ( Ed. 1 )Vertical road signs Portable deformable warning devices anddelineators Portable road traffic signs - Cones and cylindersTC 229EN 15037-2:2009 ( Ed. 1 )Precast concrete products Beam-and-block floor systemsPart 2: Concrete blocksTC 229EN 15037-3:2009 ( Ed. 1 )Precast concrete products Beam-and-block floor systems -Part 3: Clay blocksTC 230EN ISO 10304-1:2009 ( Ed. 2 )Water quality Determination of dissolved anions by liquidchromatography of ions Part 1: Determination of bromide, chloride,fluoride, nitrate, nitrite, phosphate and sulfate(ISO 10304-1:2007)TC 230EN ISO 21427-2:2009 ( Ed. 1 )Water quality Evaluation of genotoxicity by measurement of theinduction of micronuclei Part 2: Mixed population method using thecell line V79(ISO 21427-2:2006)TC 240EN 15228:2009 ( Ed. 1 )Structural timber Structural timber preservative treated againstbiological attackTC 249EN 438-8:2009 ( Ed. 1 )High-pressure decorative laminates (HPL) Sheets based onthermosetting resins (Usually called Laminates) Part 8:Classification and specifications for design laminatesTC 249EN ISO 10548:2003 /AC :2009 ( Ed. 1 )Carbon fibre Determination of size content (ISO 10548:2002)TC 249EN ISO 11337:2004 /AC :2009 ( Ed. 1 )Plastics Polyamides Determination of å-caprolactam andù-laurolactam by gas chromatography(ISO 11337:2004/Cor 1:2007)TC 249EN ISO 12086-2:2006 /AC :2009 ( Ed. 1 )Plastics Fluoropolymer dispersions and moulding and extrusionmaterialsPart 2: Preparation of test specimens and determination ofproperties(ISO 12086-2:2006/Cor 1:2006)TC 250EN 1993-1-1:2005 /AC :2009 ( Ed. 3 )Eurocode 3: Design of steel structures Part 1-1: General rules andrules for buildingsTC 250EN 1993-1-5:2006 /AC :2009 ( Ed. 1 )Eurocode 3 - Design of steel structures Part 1-5: Plated structuralelementsTC 250EN 1993-1-7:2007 /AC :2009 ( Ed. 1 )Eurocode 3 - Design of steel structures Part 1-7: Plated structuressubject to out of plane loadingTC 250EN 1993-1-9:2005 /AC :2009 ( Ed. 2 )Eurocode 3: Design of steel structures Part 1-9: FatigueTC 250EN 1993-1-10:2005 /AC :2009 ( Ed. 2 )Eurocode 3: Design of steel structures Part 1-10: Material toughnessand through-thickness propertiesTC 250EN 1993-4-1:2007 /AC :2009 ( Ed. 1 )Eurocode 3 - Design of steel structures Part 4-1: SilosTC 250EN 1994-1-1:2004 /AC :2009 ( Ed. 1 )Eurocode 4: Design of composite steel and concrete structures Part1-1: General rules and rules for buildingsTC 256EN 12299:2009 ( Ed. 1 )Railway applications Ride comfort for passengers Measurement andevaluationTC 256EN 13261:2009 ( Ed. 2 )Railway applications Wheelsets and bogies Axles - ProductrequirementsTC 256EN 13848-3:2009 ( Ed. 1 )Railway applications Track - Track geometry quality Part 3:Measuring systems - Track construction and maintenance machinesLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>TC 256EN 13979-1:2003+A1:2009 ( Ed. 1 )Railway applications Wheelsets and bogies - Monobloc wheels -Technical approval procedure Part 1: Forged and rolled wheelsTC 256EN 14587-2:2009 ( Ed. 1 )Railway applications Track - Flash butt welding of rails Part 2:New R220, R260, R260Mn and R350HT grade rails by mobilewelding machines at sites other than a fixed plantTC 256EN 14865-2:2006+A1:2009 ( Ed. 1 )Railway applications Axlebox lubricating greases Part 2: Method totest the mechanical stability to cover vehicle speeds up to 200 km/hTC 256EN 15437-1:2009 ( Ed. 1 )Railway applications Axlebox condition monitoring - Interface anddesign requirements Part 1: Track side equipment and rolling stockaxleboxTC 256EN 15594:2009 ( Ed. 1 )Railway applications Track Restoration of rails by electric arcweldingTC 261EN 12375:2009 ( Ed. 2 )Packaging Flexible aluminium tubes Wall thickness determinationmethodTC 261EN 13045:2009 ( Ed. 2 )Packaging Flexible cylindrical plastic tubes Dimensions andtolerancesTC 261EN 13048:2009 ( Ed. 2 )Packaging Flexible aluminium tubes Internal lacquer filmthickness measurement methodTC 261EN 13461:2009 ( Ed. 2 )Packaging Cylindrical flexible laminated tubes Dimensions andtolerancesTC 261EN 15653:2009 ( Ed. 1 )Packaging Flexible aluminium tubes Test method to check theresistance of the internal protective coating against ammoniaTC 261EN ISO 9100-14:2005 /AC :2009 ( Ed. 1 )Glass containers Vacuum lug finishes Part 14: 110 regular(ISO 9100- 14:2005/Cor 1:2008)TC 263EN 15713:2009 ( Ed. 1 )Secure destruction of confidential material Code of practiceTC 271EN 12981-:2005+A1:2009 ( Ed. 1 )Coating plants Spray booths for application of organic powdercoating material Safety requirementsTC 271EN 13355-:2004+A1:2009 ( Ed. 1 )Coating plants Combined booths Safety requirementsTC 271EN 14462-:2005+A1:2009 ( Ed. 1 )Surface treatment equipment Noise test code for surface treatmentequipment including its ancillary handling equipmentAccuracy grades 2 and 3TC 274EN 1915-1:2001+A1:2009 ( Ed. 1 )Aircraft ground support equipment General requirements Part 1:Basic safety requirementsTC 274EN 1915-2:2001+A1:2009 ( Ed. 1 )Aircraft ground support equipment General requirements Part 2:Stability and strength requirements, calculations and test methodsTC 274EN 1915-3:2004+A1:2009 ( Ed. 1 )Aircraft ground support equipment General requirements Part 3:Vibration measurement methods and reductionTC 274EN 1915-4.2004+A1:2009 ( Ed. 1 )Aircraft ground support equipment General requirements Part 4:Noise measurement methods and reductionTC 275EN 12821:2009 ( Ed. 2 )Foodstuffs Determination of vitamin D by high performance liquidchromatography Measurement of cholecalciferol (D3) orergocalciferol (D2)TC 286EN 14678-1:2006+A1:2009 ( Ed. 1 )LPG equipment and accessories Construction and performance ofLPGequipment for automotive filling stationsPart 1: DispensersTC 290EN ISO 3650:1998 /AC :2009 ( Ed. 1 )Geometrical product specifications (GPS) Length standards Gaugeblocks(ISO 3650:1998/Cor 1:2008)TC 293EN ISO 9999:2007 /AC :2009 ( Ed. 1 )Assistive products for persons with disability Classification andterminology(ISO 9999:2007/Cor 1:2007)TC 293EN ISO 24415-1:2009 ( Ed. 1 )Tips for assistive products for walking Requirements and testmethods Part 1: Friction of tips (ISO 24415-1:2009)TC 297EN 13084-7:2005 /AC :2009 ( Ed. 1 )Free-standing chimneys Part 7: Product specifications of cylindricalsteel fabrications for use in single wall steel chimneys and steellinersTC 305EN 15089:2009 ( Ed. 1 )Explosion isolation systemsTC 307EN ISO 16931:2009 ( Ed. 2 )Animal and vegetable fats and oils Determination of polymerizedtriacylglycerols by high-performance size-exclusionLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>chromatography (HPSEC)(ISO 16931:2009)TC 313EN 12547-:1999+A1:2009 ( Ed. 1 )Centrifuges Common safety requirementsTC 319EN 13460:2009 ( Ed. 2 )Maintenance Documentation for maintenanceTC 331CEN/TS 15873:2009 ( Ed. 1 )Postal Services Open Standard Interface Address Data File Formatfor OCR/VCS Dictionary GenerationTC 332EN 15154-3:2009 ( Ed. 1 )Emergency safety showers Part 3: Non plumbed-in body showersTC 332EN 15154-4:2009 ( Ed. 1 )Emergency safety showers Part 4: Non plumbed-in eyewash unitsTC 336EN 12591:2009 ( Ed. 2 )Bitumen and bituminous binders Specifications for paving gradebitumensTC 336EN 12847:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of settling tendencyof bituminous emulsionsTC 336EN 12848:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of mixing stabilitywith cement of bituminous emulsionsTC 336EN 12849:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of penetrationpower of bituminous emulsionsTC 336EN 12850:2009 ( Ed. 2 )Bitumen and bituminous binders Determination of the pH value ofbituminous emulsionsTC 351CEN/TR 15858:2009 ( Ed. 1 )Construction products Assessment of the release of regulateddangerous substances from construction products based on theWT, WFT/FT proceduresTC ECISS/TC1EN ISO 7500-1:2004 /AC :2009 ( Ed. 1 )Metallic materials Verification of static uniaxial testing machinesPart 1: Tension/compression testing machines - Verification andcalibration of the force-measuring system(ISO 7500-1:2004/Cor 1:2008)TC ECISS/TC22EN 10028-1:2007+A1:2009 ( Ed. 1 )Flat products made of steels for pressure purposes Part 1: GeneralrequirementsTC ECISS/TC23EN 10088-4:2009 ( Ed. 1 )Stainless steels Part 4: Technical delivery conditions for sheet/plateand strip of corrosion resisting steels for constructionpurposesTC ECISS/TC23EN 10088-5:2009 ( Ed. 1 )Stainless steels Part 5: Technical delivery conditions for bars, rods,wire, sections and bright products of corrosion resistingsteels for construction purposesTC ECISS/TC29EN ISO 8434-1:2007 /AC :2009 ( Ed. 1 )Metallic tube connections for fluid power and general use Part 1:24 degree cone connectors (ISO 8434-1:2007)TC ECISS/TC29EN ISO 19879:2005 /AC :2009 ( Ed. 1 )Metallic tube connections for fluid power and general use Testmethods for hydraulic fluid power connections(ISO 19879:2005/Cor 1:2007)TC ECISS/TC30EN 10244-1:2009 ( Ed. 2 )Steel wire and wire products Non-ferrous metallic coatings on steelwire Part 1: General principlesTC ECISS/TC30EN 10244-2:2009 ( Ed. 2 )Steel wire and wire products Non-ferrous metallic coatings on steelwire Part 2: Zinc or zinc alloy coatingsTC AECMAEN 3155-074:2009 ( Ed. 1 )Aerospace series Electrical contacts used in elements of connectionPart 074: Contacts, electrical, quadrax, size 8, male, type E, crimp,class R - Product standardTC AECMAEN 3155-075:2009 ( Ed. 1 )Aerospace series Electrical contacts used in elements of connectionPart 075: Contacts, electrical, quadrax, size 8, female, type E,crimp, class R - Product standardTC AECMAEN 3388:2009 ( Ed. 1 )Aerospace series Fasteners, externally threaded, in heat resistingnickel base alloy NI-PH2601 (Inconel 718) Classification 1 275MPa/650 °C - Manufacturing method optional - TechnicalspecificationTC AECMAEN 3475-809:2009 ( Ed. 1 )Aerospace series Cables, electrical, aircraft use - Test methodsPart 809: Resistance unbalanceTC AECMAEN 4129:2009 ( Ed. 1 )Aerospace series Bolts, normal hexagonal head, coarse tolerancenormal shank, medium length thread, in alloy steel, cadmium platedClassification: 1 100 MPa (at ambient temperature) / 235 °CTC AECMAEN 4130:2009 ( Ed. 1 )Aerospace series Bolts, normal hexagonal head, coarse tolerancenormal shank, medium length thread, in titanium alloy, aluminiumIVD coated Classification: 1 100 MPa (at ambient temperature) /425 °CTC AECMAEN 4131:2009 ( Ed. 1 )Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>Aerospace series Bolts, normal hexagonal head, coarse tolerancenormal shank, medium length thread, in heatresisting nickel base alloy, aluminium IVD coated Classification: 1250 MPa (at ambient temperature) / 425° CTC AECMAEN 4133:2009 ( Ed. 1 )Aerospace series Bolts, normal hexagonal head, coarse tolerancenormal shank, long thread, in titanium alloy, aluminium IVD coatedClassification: 1 100 MPa (at ambient temperature) / 425° CTC AECMAEN 4134:2009 ( Ed. 1 )Aerospace series Bolts, normal hexagonal head, coarse tolerancenormal shank, long thread, in heat resisting nickel base alloy,aluminium IVD coated Classification: 1 250 MPa (at ambienttemperature) / 425° CTC AECMAEN 4604-001:2009 ( Ed. 2 )Aerospace series Cable, electrical, for signal transmission Part 001:Technical specificationTC AECMAEN 4604-009:2009 ( Ed. 1 )Aerospace series Cable, electrical, for signal transmission Part009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (lightWN) - Product standardTC AECMAEN 4604-010:2009 ( Ed. 1 )Aerospace series Cable, electrical, for signal transmission Part010: Cable, coaxial, light weight, 50 ohms, 200 °C, type KX (lightWN) - Product standardTC AECMAEN 4626-202:2009 ( Ed. 1 )Aerospace series Connectors, optical, rectangular, multicontact,rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operatingtemperatures - 65 °C to 125 °C (cable dependent) - Flush contactsPart 202: Optical contact assembly for 900 ìm buffered fibrereceptacle - Product standardTC AECMAEN 4641-001:2009 ( Ed. 1 )Aerospace series Cables, optical, 125 ìm diameter cladding Part001: Technical specificationTC AECMAEN 4644-003:2009 ( Ed. 1 )Aerospace series Connector, electrical and optical, rectangular,modular, rectangular inserts, operating temperature 175 °Ccontinuous Part 003: Rectangular inserts - Product standardTC AECMAEN 9121:2009 ( Ed. 2 )Aerospace series Quality management systems Assessmentapplicable to stockist distributors (based on ISO 9001:2000)TC AECMAEN 9131:2009 ( Ed. 1 )Aerospace series Quality management systems NonconformancedocumentationLista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>2.2 CENELECNormas Europeias aprovadas na área electrotécnica pelo Comité Europeu de Normalização Electrotécnica (CENELEC)Para cada referência, menciona-se o Comité Técnico, a designação codificada e o título.SC 46XAEN 60966-3:2009 ( Ed. 3 )Radio frequency and coaxial cable assemblies Part 3: Sectionalspecification for semi-flexible coaxial cable assemblies(IEC 60966-3:2008)SR 25EN 80000-14:2009 ( Ed. 1 )Quantities and units Part 14: Telebiometrics related to humanphysiology(IEC 80000-14:2008)SR 29EN 61094-2:2009 ( Ed. 2 )Electroacoustics - Measurement microphones Part 2: Primary methodfor the pressure calibration of laboratory standard microphones bythe reciprocity technique(IEC 61094-2:2009)SR 47EEN 60747-16-3:2002 /A 1:2009 ( Ed. 1 )Semiconductor devices Part 16-3: Microwave integrated circuits -Frequency converters(IEC 60747-16-3:2002/A1:2009)SR 86EN 62496-1:2009 ( Ed. 1 )Optical circuit boards Part 1: General(IEC 62496-1:2008)TC 17ACEN 62271-100:2009 ( Ed. 2 )High-voltage switchgear and controlgear Part 100:Alternating-current circuit-breakers(IEC 62271-100:2008)TC 17ACEN 62271-109:2009 ( Ed. 2 )High-voltage switchgear and controlgear Part 109:Alternating-current series capacitor by-pass switches(IEC 62271-109:2008)TC 34ZEN 60598-2-14:2009 ( Ed. 1 )Luminaires Part 2-14: Particular requirements - Luminaires for coldcathode tubular discharge lamps (neon tubes) and similarequipment(IEC 60598-2-14:2009)TC 37AEN 61643-21:2001 /A 1:2009 ( Ed. 1 )Low voltage surge protective devices Part 21: Surge protectivedevices connected to telecommunications and signalling networks -Performance requirements and testing methods(IEC 61643-21:2000/A1:2008, modif)TC 40XAEN 60384-3:2006 /CORRIGENDUM Apr:2009 ( Ed. 1 )Fixed capacitors for use in electronic equipment Part 3: Sectionalspecification: Surface mount fixed tantalum electrolytic capacitorswith manganese dioxide solid electrolyte(IEC 60384-3:2006)TC 40XAEN 60384-3-1:2006 /CORRIGENDUM Apr:2009 ( Ed. 1 )Fixed capacitors for use in electronic equipment Part 3-1: Blankdetail specification: Surface mount fixed tantalum electrolyticcapacitors with manganese dioxide solid electrolyte - Assessmentlevel E(IEC 60384-3-1:2006)TC 40XAEN 60384-4-1:2007 /CORRIGENDUM Apr:2009 ( Ed. 1 )Fixed capacitors for use in electronic equipment Part 4-1: Blankdetail specification - Fixed aluminium electrolytic capacitors withnon-solid electrolyte - Assessment level EZ(IEC 60384-4-1:2007)TC 40XAEN 60384-4-2:2007 /CORRIGENDUM Apr:2009 ( Ed. 1 )Fixed capacitors for use in electronic equipment Part 4-2: Blankdetail specification - Fixed aluminium electrolytic capacitors withsolid (MnO2) electrolyte - Assessment level EZ(IEC 60384-4-2:2007)TC 40XBEN 140401:2009 ( Ed. 3 )Blank Detail Specification: Fixed low power non-wire-woundsurface mount (SMD) resistorsTC 55EN 60851-3:2009 ( Ed. 2 )Winding wires - Test methods Part 3: Mechanical properties(IEC 60851-3:2009)TC 59XEN 50304:2009 ( Ed. 2 )Electric cooking ranges, hobs, ovens and grills for household use- Methods for measuring performance(IEC 60350:1990 + A1:2005 + A2:2008, modif)TC 59XEN 60350:2009 ( Ed. 2 )Electric cooking ranges, hobs, ovens and grills for household use- Methods for measuring performanceTC 62EN 61676:2002 /A 1:2009 ( Ed. 1 )Medical electrical equipment - Dosimetric instruments used fornon-invasive measurement of X-ray tube potential in diagnosticradiology(IEC 61676:2002/A1:2008)TC 86AEN 60793-2-20:2009 ( Ed. 2 )Optical fibres Part 2-20: Product specifications - Sectionalspecification for category A2 multimode fibres(IEC 60793-2-20:2007)Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>TC 86AEN 60793-2-30:2009 ( Ed. 2 )Optical fibres Part 2-30: Product specifications - Sectionalspecification for category A3 multimode fibres(IEC 60793-2-30:2007)TC 210EN 61000-4-7:2002 /A 1:2009 ( Ed. 1 )Electromagnetic compatibility (EMC) Part 4-7: Testing andmeasurement techniques - General guide on harmonics andinterharmonics measurements and instrumentation, for powersupply systems and equipment connected thereto(IEC 61000-4-7:2002/A1:2008)TC 86AEN 60794-3-10:2009 ( Ed. 2 )Optical fibre cables Part 3-10: Outdoor cables - Family specificationfor duct, directly buried or lashed aerial optical telecommunicationcables(IEC 60794-3-10:2009)TC 86AEN 60794-3-20:2009 ( Ed. 2 )Optical fibre cables Part 3-20: Outdoor cables - Familyspecification for self-supporting aerial telecommunication cables(IEC 60794-3-20:2009)TC 86BXAEN 61300-3-6:2009 ( Ed. 3 )Fibre optic interconnecting devices and passive components -Basic test and measurement procedures Part 3-6: Examinations andmeasurements - Return loss(IEC 61300-3-6:2008)TC 86BXAEN 61755-3-7:2009 ( Ed. 1 )Fibre optic interconnecting devices and passive components - Fibreoptical connector optical interfaces Part 3-7: Optical interface,2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule usingtitanium as fibre surrounding material, single mode(IEC 61755-3-7:2009)TC 111XEN 62321:2009 ( Ed. 1 )Electrotechnical products - Determination of levels of sixregulated substances (lead, mercury, cadmium, hexavalentchromium, polybrominated biphenyls, polybrominated diphenylethers)(IEC 62321:2008)TC 116EN 60745-2-12:2003 /A 1:2009 ( Ed. 1 )Hand-held motor-operated electric tools - Safety Part 2-12:Particular requirements for concrete vibrators(IEC 60745-2-12:2003/A1:2008)TC 210CLC/TR 50481:2009 ( Ed. 1 )Recommendations on filters for shielded enclosuresTC 210CLC/TR 50484:2009 ( Ed. 1 )Recommendations for shielded enclosuresTC 210EN 61000-4-2:2009 ( Ed. 2 )Electromagnetic compatibility (EMC) Part 4-2: Testing andmeasurement techniques - Electrostatic discharge immunity test(IEC 61000-4-2:2008)TC 210EN 61000-4-6:2009 ( Ed. 3 )Electromagnetic compatibility (EMC) Part 4-6: Testing andmeasurement techniques - Immunity to conducted disturbances,induced by radio-frequency fields(IEC 61000-4-6:2008)Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>Lista mensal > <strong>normas</strong> 2222222222 /34 4 Mai '09
<strong>normas</strong>2.3 CEN/CENELECNormas Europeias aprovadas pelo Comité Europeu de Normalização (CEN) / Comité Europeu de NormalizaçãoElectrotécnica (CENELEC)Para cada referência, menciona-se a designação codificada e o título.LISTA VAZIALista Mensal - Normas p. 31 de 34 4 Maio 2009
<strong>normas</strong>2.4 ETSINormas Europeias aprovadas e publicadas no sector das Telecomunicações pelo Instituto Europeu de Normalizaçãopara as Telecomunicações (ETSI)Para cada referência, menciona-se a designação codificada e o título.TC ETSIEN 302217-4-1:2009 ( V1.3.1 )Fixed Radio Systems; Characteristics and requirements forpoint-to-point equipment and antennas Part 4-1: System-dependentrequirements for antennasTC ETSIEN 302217-4-2:2009 ( V1.4.1 )Fixed Radio Systems; Characteristics and requirements forpoint-to-point equipment and antennas Part 4-2: Antennas;Harmonized EN covering the essential requirements of article 3.2of the R&TTE DirectiveLista Mensal - Normas p. 32 de 34 4 Maio 2009
<strong>normas</strong>3. Normas Internacionais publicadasNormas Internacionais aprovadas e publicadas pela Comissão Electrotécnica Internacional (IEC) e pela OrganizaçãoInternacional de Normalização (ISO)Para cada referência, menciona-se o Comité Técnico, a designação codificada, a data e o título.IECFrequency range 0 to 3 000 MHz, IEC 61169-2 connectorsTC 47EIEC 60747-16-3:2002 /A 1:2009 ( Ed 1.0 )Semiconductor devices Part 16-3: Microwave integrated circuits -Frequency convertersTC 62CIEC 61676:2009-01 ( Ed 1.1 ) ConsolidadaMedical electrical equipment - Dosimetric instruments used fornon-invasive measurement of X-ray tube potential in diagnosticradiologyTC 86AIEC 60794-3-10:2009 ( Ed 2.0 )Optical fibre cables Part 3-10: Outdoor cables - Family specificationfor duct, directly buried or lashed aerial optical telecommunicationcablesTC 86AIEC 60794-3-20:2009 ( Ed 2.0 )Optical fibre cables Part 3-20: Outdoor cables - Familyspecification for optical self-supporting aerial telecommunicationcablesTC 29IEC 61094-2:2009 ( Ed 2.0 )Electroacoustics - Measurement microphones Part 2: Primary methodfor the pressure calibration of laboratory standard microphones bythe reciprocity techniqueTC 37IEC 60099-4:2004 /A 2:2009 ( Ed 2.0 )Surge arresters Part 4: Metal-oxide surge arresters without gaps fora.c. systemsTC 40IEC 60115-8:2009 ( Ed 2.0 )Fixed resistors for use in electronic equipment Part 8: Sectionalspecification - Fixed surface mount resistorsTC 46IEC 60966-2-3:2009 ( Ed 3.0 )Radio frequency and coaxial cable assemblies Part 2-3: Detailspecification for flexible coaxial cable assemblies - Frequencyrange 0 to 1 000 MHz, IEC 61169-8 connectorsTC 46IEC 60966-2-4:2009 ( Ed 3.0 )Radio frequency and coaxial cable assemblies Part 2-4: Detailspecification for cable assemblies for radio and TV receivers -TC 46IEC 60966-2-5:2009 ( Ed 3.0 )Radio frequency and coaxial cable assemblies Part 2-5: Detailspecification for cable assemblies for radio and TV receivers -Frequency range 0 to 1 000 MHz, IEC 61169-2 connectorsTC 46IEC 60966-2-6:2009 ( Ed 3.0 )Radio frequency and coaxial cable assemblies Part 2-6: Detailspecification for cable assemblies for radio and TV receivers -Frequency range 0 to 3 000 MHz, IEC 61169-24 connectorsTC 46IEC 60966-3-1:2009 ( Ed 3.0 )Radio frequency and coaxial cable assemblies Part 3-1: Blank detailspecification for semi-flexible coaxial cable assembliesTC 55IEC 60851-3:2009 ( Ed 3.0 )Winding wires - Test methods Part 3: Mechanical propertiesTC 61IEC 60335-2-31:2009-01 ( Ed 4.2 ) ConsolidadaHousehold and similar electrical appliances - Safety Part 2-31:Particular requirements for range hoods and other cooking fumeextractorsTC 104IEC 60068-2-14:2009 ( Ed 6.0 )Environmental testing Part 2-14: Tests - Test N: Change oftemperatureTC 104IEC 60068-2-38:2009 ( Ed 2.0 )Environmental testing Part 2-38: Tests - Test Z/AD: Compositetemperature/humidity cyclic testISOTC 43ISO 9612:2009 ( Ed 1 )Acoustics Determination of occupational noise exposureEngineering methodTC 67ISO 23936-1:2009 ( Ed 1 )Petroleum, petrochemical and natural gas industries NonmetallicLista Mensal - Normas p. 33 de 34 4 Maio 2009
<strong>normas</strong>materials in contact with media related to oil and gas productionPart 1: ThermoplasticsNoise test cod Part 7: Dyeing and finishing machineryAMENDMENT 1TC 72ISO 9902-1:2001 /A 1:2009 ( Ed 1 )Textile machinery Noise test codPart 1: Common requirementsAMENDMENT 1TC 72ISO 9902-2:2001 /A 1:2009 ( Ed 1 )Textile machinery Noise test codPart 2: Spinning preparatory and spinning machineryAMENDMENT 1TC 72ISO 9902-3:2001 /A 1:2009 ( Ed 1 )Textile machinery Noise test codPart 3: Nonwoven machineryAMENDMENT 1TC 72ISO 9902-4:2001 /A 1:2009 ( Ed 1 )Textile machinery Noise test codPart 4: Yarn processing, cordage and rope manufacturingmachineryAMENDMENT 1TC 72ISO 9902-5:2001 /A 1:2009 ( Ed 1 )Textile machinery Noise test cod Part 5: Weaving and knittingpreparatory machineryAMENDMENT 1TC 72ISO 9902-6:2001 /A 1:2009 ( Ed 1 )Textile machinery Noise test codPart 6: Fabric manufacturing machineryAMENDMENT 1TC 72ISO 9902-7:2001 /A 1:2009 ( Ed 1 )Textile machineryLista Mensal - Normas p. 34 de 34 4 Maio 2009
Change language