BOC (HAND DEPLOY PILOT CHUTE) - United Parachute ...

More documents

Recommendations

Info

Lay the 3 bar adapter back downand close the Velcro covers.NOTE:Make sure no hook Velcrois exposed and cannotcome into contact withother parts of the rig.Tuck the dead end onto its elastickeeper.Stow remaining excess strap intothe rear of leg pad cover.36 | P age
After tightening the leg straps,thread the excess through theelastic keeper on the rear of legstrap.The entire excess length of legstrap is pulled through.Fold/roll up excess and stow inkeeper as sown.NOTE:DONNING THE VECTOR SE FIXED HARNESSThe Vector SE fixed harness is no different from the sport model. Please refer to theVector 3 sport manual for donning instructions.37 | P age
Page 1: Users ManualStudent Addendum Versio
Page 5 and 6: SE PART IDENTIFICATIONPILOT CHUTE A
Page 7 and 8: MAIN HAND DEPLOYED PILOTCHUTE WITH
Page 9 and 10: Back Pad Carry Handle Warning Label
Page 11 and 12: INSTALLING THE RIPCORD (SPRING LOAD
Page 13 and 14: Method B:NOTE:If your Drop Zone use
Page 15 and 16: Method B:Fold a 7 ½” piece of ho
Page 17 and 18: ATTACHING THE STATIC LINE (DIRECT B
Page 19 and 20: MAIN CLOSING INSTRUCTIONSBOC (HAND
Page 21 and 22: Thread the pull‐up cord thoughthe
Page 23 and 24: MAIN CLOSING INSTRUCTIONSPILOT CHUT
Page 25 and 26: NOTE:The type of aircraft used will
Page 27 and 28: After laying the deployment baginto
Page 29 and 30: MAIN CLOSING INSTRUCTIONSDIRECT BAG
Page 31 and 32: Thread the pull‐up cord throughth
Page 33 and 34: ADJUSTABLE HARNESS NOMENCLATUREMain
Page 35: To shorten the MLW:Open the Velcro
Page 39 and 40: NOTE:After mounting the housing,the
Page 41 and 42: Bend the housing to align andmount
Page 43 and 44: Assembling and packing the reserve
Page 45: 45 | P age

BOC (HAND DEPLOY PILOT CHUTE) - United Parachute ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?