Danfoss TS715 timeswitch manual as used in Vizion - Thameswey ...

Recommendations

Info

SETTING THE DAYPress DAY repeatedly untilthe correct day of the weekis displayed. MO is Monday,TU is Tuesday etc.Setting Day, Accepting Preset ProgrammesAccepting the preset programmesIf you are happy to use the presetprogrammes on page 10, you don’tneed to do anything else.To accept the factory presets justpress the PROG button until thetime appears & colon in the displaybegins to fl ash.Your unit is now in RUN mode and will control your heatingand hot water according to the preset programmes.712
Before you change the preset programmesYour installer will have set your unit to operate in one of thefollowing modes:● 5/2 day - one set of programmes for weekdays andanother for weekends (page 14-15)● 7 day - different settings for each day of the week(page 16-17)● 24 hour - one set of programmes for the whole week(page 18)!See INSTALLER SETTING tick boxon inside fl ap label to ascertain whichmode your unit is set .Please NoteINSTALLER SETTING24 Hour5+2 Day7 DayThe unit must be programmed in sequence and ON/OFF times cannot be set out of sequence.If you want to leave a preset time as it is, simply pressNEXT to move on to the next settingYour installer will have set your unit to programmeeither 2 or 3 ON/OFFs per day. If your clock has beeninstalled to allow 3 ON/OFFs and you do not wish touse one of the ON/OFF settings, simply programmethe ON time to be the same as the OFF time and thesetting will not operate.Changing Preset Programmes!If at any time you get confused and need to resetyour timings to the standard programme, press theRESET button to return to the preset programmes.13
Page 1 and 2: TS715single channeltimeswitchInstal
Page 4 and 5: InstallationRemove wallplate from u
Page 6 and 7: WIRING CONVERSIONSWiring conversion
Page 8: DANFOSS RANDALLTS715MAINSNNLLThe TS
Page 11: Before you startOpen the fl ap on t
Page 15 and 16: 4. Press the DAY button onceand SAS
Page 17 and 18: Continue programmingthe rest of the
Page 19 and 20: Running your ProgrammeTo run the pr
Page 21 and 22: Changing clocks forward & backOpen
Page 24: Still having problems?Call your loc

Danfoss TS715 timeswitch manual as used in Vizion - Thameswey ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?