Danfoss TS715 timeswitch manual as used in Vizion - Thameswey ...

Recommendations

Info

Programming heating & hot water system - 7 day modeProgramming the heating & hotwater in 7 day mode1. Press PROG until SETON TIME appears at thetop of the display and MOappears at the bottom ofthe display.Use the + and - buttons toset the time you want yoursystem to fi rst come on inthe morning (Event 1).2. Press NEXT ON/OFF tomove to Event 2.Continue programmingthe system ON and OFFtimes in this way by usingthe + and - buttons toset the time you wantand pressing the NEXTON/OFF button to moveto the next setting.3. Press DAY button onceonly. TU will appear at thebottom of the display.16
Continue programmingthe rest of the week bypressing:a) NEXT ON/OFF button tomove to the next setting,b) + and - buttons to amendthe timec) DAY to advance to thenext day.Alternatively press COPY tokeep the same settings asthe day before4. Press the PROG buttonto return the unit to RUNmode (time appears & colonin the display begins tofl ash)5. Proceed to page 19.Programming heating & hot water system - 7 day mode17
Page 1 and 2: TS715single channeltimeswitchInstal
Page 4 and 5: InstallationRemove wallplate from u
Page 6 and 7: WIRING CONVERSIONSWiring conversion
Page 8: DANFOSS RANDALLTS715MAINSNNLLThe TS
Page 11 and 12: Before you startOpen the fl ap on t
Page 13 and 14: Before you change the preset progra
Page 15: 4. Press the DAY button onceand SAS
Page 19 and 20: Running your ProgrammeTo run the pr
Page 21 and 22: Changing clocks forward & backOpen
Page 24: Still having problems?Call your loc

Danfoss TS715 timeswitch manual as used in Vizion - Thameswey ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?