Danfoss TS715 timeswitch manual as used in Vizion - Thameswey ...

Fault Check ListNo Hot WaterCheck TS715 programmer. Make sure selector is set to ON.Is the red light on? No Check fuse in fused spurYesCheck cylinder thermostatIs the stat set to a temperature of60°C? No Turn knob to 60°CYesCheck boilerIs the boiler on? No Check the boiler thermostatYesWater should be hot in 45 mins.Set boiler stat to maximum Is boiler on? No Check the reset buttonYesWater should be hot in 45 mins.Push the boiler reset button in Did boiler light? NoYesWater should be hot in 20 mins.Telephone your local Heating EngineerAfter the water has been heated, return the programmer and other controls to the required settings.TroubleshootingNo HeatingCheck TS715 programmer. Make sure selector is set to ON.Is the red light on? No Check fuse in fused spurYes Check room thermostatIs stat. temp. set higher than room temp? No Set stat to 30°CYes Check boilerIs the boiler on? No Check boiler thermostat is set to max.YesRadiators should be hot in 45 mins.Set boiler stat to maximum Is boiler on? No Check the reset buttonYesRadiators should be hot in 45 mins.Push the boiler reset button in Did boiler light? NoYesRadiators should be hot in 20 mins.Telephone your local Heating EngineerAfter the heating has come back on, return the programmer and other controls to the required settings.22