Danfoss TS715 timeswitch manual as used in Vizion - Thameswey ...

Recommendations

Info

Programming heating & hot water system - 24 hour modeProgramming the heating & hotwater in 24 hour mode1. Press PROG until SET ONTIME appears at the top ofthe display.Use the + and - buttons toset the time you want yoursystem to fi rst come on inthe morning (Event 1).2. Press NEXT ON/OFF tomove to Event 2.Continue programming thesystem ON and OFF timesby pressing:a) NEXT ON/OFF button tomove to the next setting,b) + and - buttons to amendthe time3. Press the PROG button toreturn the unit to RUN mode(time appears & colon in thedisplay begins to fl ash)4. Proceed to page 19.18
Running your ProgrammeTo run the programme:press the SELECT button.As you press the SELECT buttonthe display will change betweenON, OFF, ALLDAY and AUTO.ONOFFALLDAY●●●●AUTO = the system will come on and go off atthe programmed timesON = the system will remain on constantlyOFF = the system will not come onALLDAY = the clock will turn the system on atthe fi rst programmed ON and will leave it onuntil your last programmed OFFRUN modeSelect the option you require depending on yourcircumstances, time of year, etc.19
Page 1 and 2: TS715single channeltimeswitchInstal
Page 4 and 5: InstallationRemove wallplate from u
Page 6 and 7: WIRING CONVERSIONSWiring conversion
Page 8: DANFOSS RANDALLTS715MAINSNNLLThe TS
Page 11 and 12: Before you startOpen the fl ap on t
Page 13 and 14: Before you change the preset progra
Page 15 and 16: 4. Press the DAY button onceand SAS
Page 17: Continue programmingthe rest of the
Page 21 and 22: Changing clocks forward & backOpen
Page 24: Still having problems?Call your loc

Danfoss TS715 timeswitch manual as used in Vizion - Thameswey ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?