Ruger Model 77/50
Ruger Model 77/50
Ruger Model 77/50
SHOW LESS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. To replace the barrel/receiver assembly into the stock: (Caution: Be certainthat the pivot pins are not protruding from either side of the receiver.)a. Carefully install the barrel/receiver assembly into the stock, making surethe barrel/receiver assembly is in the most rearward position.(See Figure 29)29INSERT BARRELLED ACTION INTO STOCKb. Install the trigger guard and screws (shorter screw in front).(See Figure 30)30SHORT SCREWIN FRONTBACREINSTALL TRIGGER GUARD32
Change language