Ruger Model 77/50

c. Slide barrel band overbarrel and rearward ontothe stock forend. Tightenband screw when in place.Replace ramrod in stockthrough thimble underbarrel. (See Figures 31a,31b, & 31c) Ramrod headshould rest in barrel cutbeneath muzzle.Ramrod will not enterstock easily if bandscrew is tightenedexcessively.31aREINSTALL BANDTURNSCREWCLOCKWISE31bTIGHTEN BARREL BAND SCREWTHIMBLEHEAD INNOTCHREINSTALL RAMROD31c6. To assemble the bolt:a. Lubricate the bolt sleevethreads and the angledcocking cam surface on therear of the bolt. Slide thebolt sleeve assembly intothe bolt from the rear. Screwthe bolt sleeve into the boltto position shown (clockwisepast notch). (See Fig. 32)3233SCREW BOLT SLEEVE INTO BOLTb. Carefully remove thewrench handle on pin fromcocking piece (See Fig. 33)REMOVE PIN33