ETAG 022 Watertight covering kits for wet room floors and or walls ...

More documents

Recommendations

Info

Table of contents1 SCOPE OF THE ETAG1.1 Definition of the construction product1.2 Intended use of the construction product1.2.1 General1.2.2 Substrates1.3 Assumed working life of the construction product1.4 Terminology1.4.1 Common terms relating to the Construction Products Directive1.4.2 Specific terms used in this ETAG1.5 Procedure in the case of a significant deviation from the ETAG2 Assessment of fitness for use2.1 Meaning of "fitness for use"2.2 Elements of the assessment of fitness for use2.3 Relationship of requirements to the characteristics of the assembled system and its components andmethod of verification and assessment2.4 Characteristics of the assembled system, which are relevant for the fitness for use2.4.1 Reaction to fire2.4.2 Release of dangerous substances2.4.3 Vapour permeability2.4.4 Moisture resistance2.4.4.1 Water tightness2.4.4.2 Crack bridging ability2.4.4.3 Bond strength2.4.4.4 Scratching resistance2.4.4.5 Joint bridging ability2.4.4.6 Impermeability at sealings2.4.4.7 Water tightness around penetrations2.4.5 Slipperiness2.4.6 Durability2.4.6.1 Dimensional stability2.4.6.2 Resistance to temperature2.4.6.3 Resistance to water2.4.6.4 Resistance to alkalinity2.4.6.5 Resistance to chemical agents2.4.6.6 Resistance to biological agents2.4.6.7 Resistance to mechanical wear2.4.7 Serviceability2.4.7.1 Cleanability2.4.7.2 Repairability2.4.7.3 Thickness2.4.7.4 Applicability2.5 Components and their characteristics, which are relevant for the fitness for use3 EVALUATION AND ATTESTATION OF CONFORMITY AND CE MARKING3.1 Systems of conformity attestation3.2 Tasks and responsibilities of the manufacturer and notified bodies3.3 CE marking and accompanying information4 Assumptions under which the fitness for the intended use is assessed4.1 Manufacturing of the kit4.2 Packaging, transport, storage of the kit4.3 Installation of the kit in the works4.4 Use, maintenance, repair2
5 Identification of the construction product5.1 Means of identification5.2 Product characteristics used for identification checking5.2.1 Boards5.2.1.1 Compression behaviour5.2.1.2 Thermographic analysis5.2.1.3 Flexural bending capacity5.2.1.4 Bond strength5.2.2 Adhesives5.2.2.1 Thermographic analysis5.2.2.2 Viscosity5.2.2.3 Density5.2.2.4 pH-value5.2.3 Primers and sealing products5.2.3.1 Infrared spectrometry of the primer and of the sealants5.2.3.2 Viscosity5.2.3.3 Density5.2.3.4 pH-value5.2.4 Reinforcements5.2.4.1 Tensile strength and elongation6 Format of ETAs issued on the basis of the ETAG7 Reference documentsAnnex AAnnex BAnnex CAnnex DAnnex EAnnex FAnnex GAnnex HAnnex IWater tightness around penetrations and other details in wet room floors with flexiblesubstratesImpermeability when subjected to movement of the underlying material – tensile and shearloadingTest for scratching resistanceNot relevant for this partWalls in wet rooms: Water tightness and resistance to water and moisture of walls with flexiblesubstrateWater tightness around penetrations and other details in wet room walls with flexible substrateWater tightness around penetrations and other details in wet room walls and floors with rigidsubstratesNot relevant for this partMounting and fixing rules for the reaction to fire testing3
Page 1: Established pursuant to Annex II of
Page 5 and 6: 1.2 Intended use of the constructio
Page 7 and 8: 1.3 Assumed working life of the con
Page 9 and 10: 1.5 Procedure in the case of a sign
Page 11 and 12: Table 2:Characteristics of the asse
Page 13 and 14: 2.4 Characteristics of the assemble
Page 15 and 16: TestingAfter storage the test speci
Page 17 and 18: 2.4.4.6 Impermeability at sealingsT
Page 19 and 20: 2.4.6.3.2 Method of assessing and j
Page 21 and 22: Step 3: The sample is cleaned accor
Page 23 and 24: 3 Evaluation and attestation of con
Page 25 and 26: 3.2.1 Tasks of the manufacturer (Co
Page 27 and 28: 3.2.2 Tasks of the notified body (c
Page 29 and 30: 4 ASSUMPTIONS UNDER WHICH THE FITNE
Page 31 and 32: 5 IDENTIFICATION OF THE CONSTRUCTIO
Page 33 and 34: 5.2.2.1 Thermographic analysis5.2.2
Page 35 and 36: 5.2.4 ReinforcementsThe reinforceme
Page 37: EN 13164EN 13165EN 13163EN 1847Ther

ETAG 022 Watertight covering kits for wet room floors and or walls ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?