Roundtest RA-2100 Series - Mitutoyo Scandinavia AB

OPTIONAL ACCESSORIESInterchangeable Styli for RA-2100S/H CNCApplication/TypeOrder No.Stylus tipGroove12AAE310ø1.6 mm tungsten carbideFlat surface12AAE302ø1.6 mm tungsten carbideGeneral purpose12AAF150ø1.6 mm tungsten carbideNotch12AAE309ø1.6 mm tungsten carbide44.7Standard stylus for RA-2100S/H CNCStandard stylus for RA-2100S/H CNCDimensions(mm)ø2.443.8336.914044.6ø2.433ø1.223.116544.6ø 2.433ø1.28.18.81653345.3ø2.4ø1.2Application/TypeOrder No.Stylus tipø1.6 mm ball12AAE303ø1.6 mm tungsten carbideø0.8 mm ball12AAE304ø0.8 mm tungsten carbideø0.5 mm ball12AAE305ø0.5 mm tungsten carbideDeep groove12AAE308ø1.6 mm tungsten carbideDimensions(mm)ø2.444.63320ø1.244.23312ø0.644.133ø0.3344.7ø2.443.8331.29.5Application/TypeOrder No.Stylus tipDeep hole A12AAE306ø1.6 mm tungsten carbideDeep hole B12AAE307ø1.6 mm tungsten carbide69.7Dimensions(mm)ø2.468.858ø1.22.8172(69.6)58ø2.4ø1.28.1Options common to the RA-2100S/H CNC, RA-2100AS/AH/DS/DHCentering chuck(key operated)No.211-014Suitable for holding longer partsand those requiring a relativelypowerful clamp.• Holding capacity:Internal jaws, OD: 1-35 mm Internaljaws, ID: 33-85 mm External jaws, OD:30-80 mm• External dimensions: ø157x76 mm• Mass: 3.8 kgCentering chuck(ring operated)No.211-032Suitable for holding small partswith easy-to-operate knurled-ringclamping.• Holding capacity:Internal jaws, OD: 1-36 mm Internaljaws, ID: 14-70 mm External jaws,OD: 1-75 mm• External dimensions:ø118x34 mm• Mass: 1.2kgMicro-chuckNo.211-031Used for clamping a workpiecewith a diameter less than 1 mmthat the centering chuck cannothandle.•Holding capacity:up to ø1.5 mm• External dimensions:ø118x48.5 mm• Mass: 0.8kgMagnificationcalibration gageNo.211-045Used for normalizing detectormagnification by calibratingdetector travel againstdisplacement of a micrometerspindle.• Maximum calibration range: 400µm• Graduation: 0.2µm• External dimensions (WxDxH):235(max)x185x70 mm• Mass: 4kgVibration isolatorNo.178-025• Vibration isolation method:Air suspended, diaphragm isolationsystem.•External dimensions:ø70x250 mmVibration isolatorstandNo.178-024Cylindrical squareNo.350850• Straightness: 0.5µm• Cylindricity: 2µm• External dimensions:ø70x250 mm• Mass: 7.5kgProtective shieldNo.12AAB94910