HAND WINCH TYPE HA-AG - Lift Turn Move

HAND WINCH TYPE HA-SWLifting capacity 80 kg - 125 kg for wall mounting• Wall mounted spur gear winch with fixed crank• Compact unobtrusive hand winches• Pressed steel with zinc plating, corrossion resistant• Easy, safe operation• Rope outlet in any direction• With automatic Siku type brake - self sustaining• Stainless Steel version available - 125 kgProduct code HA-SW80 HA-SW125Lifting capacity 1st layer (kg) 80 125Lifting capacity last layer (kg) 47 60Rope diameter (mm) 3 4Rope capacity 1st layer (m) 2.1 1.5Rope capacity total (m) 20 15Number of layers 6 6Ratio 1:1 1:1Drum width (mm) 60 83Lift per crank turn (mm) 135 135Required effort (kg) 14 14Duty class to DIN 15020 1Em 1EmWeight (kg) 2.5 2.530DIMENSIONS (mm)Capacity (kg) 80 125A 142 142B 150 250C 105 144D 85 126Eø 40 40F 100 100G 150 150H 180 180J 70 70Kø 9 9125 kg Stainless Steel Winchis also available

HAND WINCH TYPE HA-SGSLifting capacity 250 kg or 500 kg• Wall mounted spur gear winch with removable crank handle• Removable crank and handle fits either front or back faces -this avoids unintentional operation – useful in non secure areas likeschools etc.• Easily installed on flat surfaces - unobtrusive• Internal automatic load brake, high security with a slackrope inhibiter• Quiet in operation• Painted finish as standard, orange• Suitable for manual ground support truss systems• Complies with BS EN 13157Product code HA-SGS250 HA-SGS500Lifting capacity 1st layer (kg) 250 500Lifting capacity last layer (kg) 162 331Rope diameter (mm) 5 6.5Rope capacity 1st layer (m) 2.7 2.1Rope capacity total (m) 15 10Number of layers 6 6Ratio 5.06:1 9.2:1Lift per crank turn (mm) 47 25Required effort daN 120 140Duty class to DIN 15020 1Em 1Em33Weight (kg) 12 12

HAND WINCH TYPE HA-WV, HA-KVLifting capacity 300 kg or 500 kgBase or wallmounting (KV)• Compact, modern, braked winch - for wall mounting (WV),base or wall mounting (KV)• Innovative winch with large rope capacity• Corrosion resistant zinc plated with fully enclosed gears and brakeencased in plastic cover• Self locking internal brake with proven security concept• Lightweight and compact• Folding Crank• Quiet in operation• Available in 2 versions – wall mounting (WV) or base mountingwith mounting frame (KV)• Stainless Steel version available see page 46Product code WV(wall mounting)Product code KV(base orwall mounting)HA-WV300HA-KV300HA-WV500HA-KV500Lifting capacity 1st layer (kg) 300 500Lifting capacity last layer (kg) 185 300Rope diameter (mm) 4 5Rope capacity 1st layer (m) 3.4 2.6Rope capacity total (m) 29 22Number of layers 6 6Ratio 3.1:1 4.5:134Lift per crank turn (mm) 64 46Required effort (kg) 16 20Duty class to DIN 15020 1Em 1EmWeight (kg) 5 5DIMENSIONS (mm)Capacity (kg) 300 500A 337 337B 170 170C 135 135D 105 105Wall mounting (WV)E1 200 200F 83 83F1 65 65G 160 160H 250 250J 130 130K 140 140L 60 60MØ 11 11NØ 13 13

HAND WINCH TYPE GO-AFDLifting capacity 190 kg - 1994 kg• General purpose braked winch for base or column mounting• Large rope capacity• Corrosion resistant zinc plated with fully enclosed gears and brakeencased in plastic cover• Self locking internal brake with proven security concept• Lightweight and compact• Stamped gears with gear protection• Folding crank• Quiet in operation• Stainless Steel version available see page 45• supplied for webbing or wire ropeWIRE ROPE WINCHESProduct code GO-4AFMD GO-4AFD GO-6AFD GO-8AFD GO-12AFD GO-20AFD GO-30AFDLifting capacity 1st layer (kg) 190 340 500 650 900 1180 1994Lifting capacity last layer (kg) 80 190 240 270 490 650 1419Rope diameter (mm) 3 4 5 6 7 8 9Rope capacity 1st layer (m) 0.57 1.94 1.73 1.7 1.76 2.0 3.6Rope capacity total (m) 8 12 14 19 13 10 13Drum diameter (mm) 27 40 45 54 63 76 80Number of rope layers 8 4 5 7 5 4 2Gear ratio 2.57:1 2.57:1 3.5:1 4.85:1 9.71:1 9.71:1 21.85/1Lift per crank turn (1st layer) (mm) 37 54 45 39 23 25 13Required effort (kg) 15 24 24 23 25 19 24Minimum load for brake function (kg) 10 10 10 10 10 10 5035Rolling load capacity on a 30% incline (kg) 350 500 750 850 1500 2500 3664Weight (kg) 2.2 2.7 3.7 5.5 7.4 7.8 13.7WEBBING WINCHESProduct code GO-4 AFDPS GO-6 AFDPS GO-8 AFDPS GO-12 AFDPSLifting capacity - 1st layer (kg) 340 500 650 800Lifting capacity - last layer (kg) 120 200 250 300Webbing size (mm) 50 50 50 50Drum capacity (m) 4.6 6 8 8

HAND WINCH TYPE GO-AFDDIMENSIONS (mm)ProductcodeGO-4AFM GO-4AF GO-4AFI GO-6AF GO-6AFI GO-8AF GO-8AFI GO-12AF GO-12AFI GO-12AFL GO-20AF GO-30AFA 211 250 245 265 265 265 270 294 294 294 294 365B 50 90.5 88.5 99 99 100 100 119.5 119.5 119.5 119.5 170C 78 117 117 132 132 132 130 155 155 155 155 225E 100 100 96 100 100 100 100 100 100 100 100 100F 126 128 128 161 165 200 200 214 214 214 214 300G 96 96 96 128 130 167 167 170 170 170 170 180H 195 197 202 240 232 290 290 295 295 295 330 345I 27 27 27 27 27 27 27 28 28 28 28 4L - - - - - - - - - 40 - -M 80 80 80 117 117 140 140 140 140 140 140 170N 31 31 31 58 58 81 81 81 81 81 81 98O 68 68 58 68 58 68 58 68 68 68 68 130P 92 92 92 92 92 92 92 92 92 92 92 16236Base DimensionsGO-4 AFMR4,5 R4,510.5 631.512561Handle15ø91650R4,5R4,5GO-4 AF/AFIHandleR4,5116 8.95ø921.531.5 61 14.512521.590.567GO-6 AF/AFI Handle115ø1129ø111010323215540 26 14GO-8 AF/AFIR6,25R5,5GO-12/20 AF/AFIHandle164 2210x10 ø11 ø11ø13GO-30 AF76.5ø13Handleø13371781132100.5ø11 321139.5 25.5 14.5124170 19200.5ø10.537371206435648520 210270,5474730171

HAND WINCH TYPE HA-KWV1250 kgLifting capacity from 300kg to 1250kgModern base or column mounted winch ideal for heavy dutyapplications• Column or base mounting• Lightweight• High efficiency through spur gearing• Smooth running• All components are zinc plated and corrosion resistant• Automatic load pressure brake preventsunintentional lowering of the load• Enclosed solid gears• Complies with BS EN13157• Also available as a stainless steel unit650 kg37Stainless Steel VersionProduct code HA-KWV300 HA-KWV650 HA-KWV1250Lifting capacity 1st layer (kg) 300 650 1250Lifting capacity last layer (kg) 150 330 480Wire rope diameter (mm) 4 6 8Wire rope capacity 1st layer (m) 2.5 2.4 1.9Wire rope capacity total (m) 22 23 28.5Number of layers 6 7 9Drum diameter (mm) 36 70 75Lift per crank turn (mm) 126 39 16Required effort (N) 270 240 240Weight (kg) 4 9 16300 kg

HAND WINCH TYPE HA-KWVDIMENSIONS (mm)38

HAND WINCH TYPE F-QWLifting capacity 100 kg – 1700 kg• General purpose column or base mounted winch, large drum capacity• A range of spur gear winches suitable for lifting, loweringand pulling applications• Safe and reliable double tipped brake pawl• Especially suited for vehicle winch or trailer applications• The QW winch will freewheel when unloaded; this feature canbe removed if required• Painted finishProduct code F-QW100 F-QW250 F-QW400 F-QW750 F-QW1100 F-QW1700Lifting capacity 1st layer (kg) 100 250 400 750 1100 1700Lifting capacity last layer (kg) 51 141 245 452 733 1291Rope diameter (mm) 4 5 6 8 10 12Rope capacity 1st layer (m) 4 5 5 5 6 7Rope capacity total (m) 40 40 30 30 30 20Number of layers 7 6 5 5 4 3Ratio 1:1 2.88:1 4.33:1 12.2:1 22.2:1 28.8:1Lift per crank turn (mm) 163 71 55 25 17 16.5Required effort (kg) 11.5 9 11 10 10 15Duty class to DIN 15020 1Em 1Em 1Em 1Em 1Em 1Em39Weight (kg) 7 12 13 19 26 46DIMENSIONS (mm)Capacity (kg) 100 250 400 750 1100 1700A 276.5 362.5 362.5 403.5 448 509B 117 150 150 155 195 205C 80 100 100 80 155 155D 11 15 15 18 18 18E 48 60.5 70 89.1 110 139F 110 125 140 175 190 230G 240 350 350 350 350 350H 150 150 150 150 150 150I 160 220 245 266 300 362J 147 174 182 214 231 296K 35 45 57.5 48 65 96L 90 130 130 170 170 170M 35 45 57.5 48 65 93

HAND WINCH TYPE GOLIATH GO-CSLifting capacity 100 kg - 300 kg• Worm geared, wall or base mounted winch for short movement• Compact, inexpensive self sustaining lifting winches forloads up to 300 kg• Base or wall mounting• Self locking worm gear and protective cover for greater safety• Quiet in operation; no brake ratchets• Ideal for regular short moving strokes• Meets the requirements of BS EN 13157Options:• Quick attaching handleCS 100 CS 100PS Webbing CS 300Product code GO-CS100 GO-CS200 GO-CS300 GO-CS100PSWinch type Wire Rope Wire Rope Wire Rope WebbingLifting capacity 1st layer (kg) 100 200 300 170Lifting capacity last layer (kg) 80 100 160Rope diameter (mm) 3 3 or 4 4 -Rope capacity total (m) 9 4 or 2 2 -Capacity- webbing, 1mm thick, 20mm wide (m) - - - 4.0Drum diameter (mm) 27 27 27 27Numbers of rope layers 8 2 or 4 2 or 440Gear ratio 7:1 14:1 14:1 7:1Lift per crank turn (mm) 13 7 7 13Required effort (kg) 6 6 6 6Minimum load for brake function (Kg) 10 10 10 10Weight (kg) 1.8 1.8 1.8 1.8Wall mountingBase mounting

HAND WINCH TYPE G-WGWorm geared general purpose winch• Robust and safe lifting winch• Square worm-wormwheel transmission with maintenance free bearings• Adjustable crank, with ergonomic plastic grip• Easy to grease worm gearbox• Load pressure brake with double ratchet system• Painted or zinc-plated finish• Optional conversion bracket, CB250, 500 or 1000, to match mounting holesof the previous WG-series• Grooved drum as option• 2 cable compartments multi compartment possible upon request• In compliance with DIN 15020Options:• As standard RAL 7044 (Silk grey) or Zinc plated (optional)Product code WG250 WG500 WG1000 WG1500 WG2000 WG3000 WG5000Lifting capacity - 1st cable layer (kg) 250 500 1000 1500 2000 3000 5000Lifting capacity - last cable layer (kg) 95 239 542 845 1129 1861 3165Required effort (kg) 6 10 13 21 9/18 12/24 25/50Lift per crank turn, 1st layer (mm) 17 20 13 9 11/21 8/16 9/18Rope capacity 1st layer (m) 3.1 4.4 5.2 5.4 5 5.6 5.3Rope capacity total (m) 67 67 58 50 48 42 42Rope diameter (mm) 5 6 9 10 13 16 20Weight (kg) 13 16 29 28 60 78 115DIMENSIONS (mm)41Type A B C D G H J K L M N O P R SWG250 238 145 100 192 106 102 48 14 160 191 15 354 280 171 130WG500 269 160 115 223 107 131 70 14 190 221 15 384 325 192 130WG1000 302 195 141 254 110 160 102 14 240 266 15 429 350 264 130WG1500 302 250 178 254 111 160 102 14 240 278 15 441 350 306 130WG2000 410 295 196 360 137 180 133 25 312 208 249 740 380 419 250WG3000 436 256 251 386 137 205 165 25 376 260 308 825 380 550 250WG5000 436 421 316 386 138 200 219 25 437 298 335 865 380 613 250

ADDITIONAL PNEUMATIC DRIVE FOR G-WG WINCHESRobust air motor• Easy to operate joystick• One-hand operation possible• Suitable to use with the following winches manufactured from august 2006:G-WG1500, G-WG2000, G-WG3000, G-WG4000, G-WG5000, Pneumatic drive can be usedwith winches manufactured pre August 2006 with a small alteration ( please ask for details)• Variable hoisting speed - adjustable via hand joystick.Product codeWG-PNDAir pressureMax 6 barFree speedca.65 rpmSpeed at max. power (100 Nm)ca.35 rpmAir consumption at max power 0,93 m 3 /mDimension L x H x B395 x 150 x 115 mmWeight5kg42

CONVERSION BRACKET FOR NEW STYLE G-WG250-500-1000• Conversion plate converts the new style winch to old style WG fixing centresBracketMounting holes dimension CxD (mm)WG-winch including conversion bracketCB250 82 x 261CB500 106 x 281CB1000 141 x 31643HAND WINCH TYPE G-WG OPTIONSStandard winchElectro - Zinc PlatedSplit drum optionGrooved drum option

HAND WINCH TYPE GO-AFID (STAINLESS STEEL)Lifting capacity 190 kg - 900 kg• General purpose brake winch for base or column mounting in Stainless steel• Column or base mounting• Stainless steel 316L material• Lightweight- inexpensive• Smooth running, high efficiency with spur gearing• Automatic load pressure brake prevents the unintentional lowering of the load• Stamped gears- with gear protection• Complies with BS EN 13157• For wire ropes or webbingProduct code GO-4AFMID GO-4AFID GO-6AFID GO-8AFID GO-12AFIDLifting capacity 1st layer (kg) 190 340 500 650 900Lifting capacity last layer (kg) 80 180 240 270 490Rope diameter (mm) 3 4 5 6 7Rope capacity 1st layer (m) 0.57 1.94 1.73 1.7 1.76Rope capacity total (m) 8 12 14 19 13Drum diameter (mm) 27 36 45 54 63Numbers of rope layers 8 4 5 7 5Gear ratio 2.57:1 2.57:1 3.5:1 4.85:1 9.71:1Lift per crank turn (mm) 37 54 45 39 23Required effort (kg) 15 24 24 23 25Minimum load for the brake function (kg) 10 10 10 10 10Dimensions see page 36Weight (kg) 2.2 2.8 4.4 5.2 7.645

HAND WINCH TYPE HA-WE/HA-KE - STAINLESS STEELLifting capacity 300 kg or 500 kg for wall mounting (WE),base or wall mounting (KE)Base mounting (KE)• Compact, moderm wall or base mounted winches in stainless steel,large rope capacity• Corrosion resistant stainless steel with gears protected by plastic casing• Large rope capacity• Self locking internal brake with proven security concept• Lightweight and compact shape, folding crank, fully enclosed gearsand brake• Quiet in operation• Available in 2 versions – wall mounting (WE) or base mounting (KE)with mounting bracketProduct code KE(base or wall mounting)HA-KE300HA-KE500Product code WE(wall mounting)HA-WE300HA-WE500Lifting capacity 1st layer (kg) 300 500Lifting capacity last layer (kg) 185 300Rope diameter (mm) 4 5Rope capacity 1st layer (m) 3.4 2.6Rope capacity total (m) 29 22Number of layers 6 6Ratio 3.1:1 4.5:1Lift per crank turn (mm) 64 4646Required effort (kg) 16 20Duty class to DIN 15020 1Em 1EmWeight (kg) 5 5DIMENSIONS (mm)Capacity (kg) 300 500A 337 337B 170 170C 135 135D 105 105E1 200 200Wall mounting (WE)F 83 83F1 65 65G 160 160H 250 250J 130 130K 140 140L 60 60MØ 11 11NØ 13 13

HAND ROPE WINCH HA-ED 2SStainless steel manual winch made from 304 Grade stainlesssteel for harsh environment applications, especially in areaswith aggressive conditions ,e.g. chemical and food industry,clarification plants, special refuse disposal, transport andmarine applications.Product codeCapacity: 1st rope position4th rope positionCrank force low gearHA-ED 2S500 kg335 kg170 N• Space saving internal self actuating load brake• High and low speed gears• Free wheel• Lifelong lubrication• Large rope capacity• High efficiency• Detachable safety crank• Superior qualityLift/crank turn: low gearLift/crank turn: fast gearRope diameter (mm)Weight37 mm280 mmø 6 mm11 kg47HAND ROPE WINCH HA-ED 500 - 700Stainless steel manual winch made from 304 Grade stainlesssteel for harsh environment applications, especially in areaswith aggressive conditions ,e.g. chemical and food industry,clarification plants, waste disposal, transport and marineapplications.• Space saving internal self actuating load brake• Lifelong lubrication• Large rope capacity• High efficiency• Detachable safety crank• Superior quality• Proven security conceptProduct code HA-ED 500 HA-ED 750Capacity: 1st rope layer 500 kg 750 kgCapacity: Last rope layer(4th layer)350 kg 445 kgLift per crank turn 37 mm 30 mmEffort on crank 170 N 180 NRope capacity 25 m 26 mRope diameter ø 6 mm ø 6 mWeight 10 kg 10 kg

HAND WINCH TYPE G-TLLifting capacity 150 kg for wall mounting – Designed to raise and lower basketball nets• Casing made of blow resistant black ABS plastic material• Robust and safe with no protruding parts• Equipped with an internal load reaction friction brake and removablesafety crank to avoid unintentional operation• Painted internal componentsProduct codeG-TL150Lifting capacity 1st layer (kg) 150Lifting capacity last layer (kg) 75Rope diameter (mm) 4Rope capacity 1st layer (m) 1.7Rope capacity total (m) 10Number of layers 5Ratio 1:1Lift per crank turn (mm) 125Required effort (kg) 8Weight (kg) 6DIMENSIONS (mm)48

HAND WINCH TYPE HA-WMLifting capacity 250 kg - 500 kg for wall mounting• Low cost worm gear winch• Designed for lowering spare wheels on trucks• A robust, inexpensive, easily operated winch withvarious mounting possibilities• Self locking worm gear drive and proven security concept• Available as standard with a fixed handle;other options available• Suitable for outside use• Suitable for wire or fibre ropeProduct code HA-WM250 HA-WM400 HA-WM500Lifting capacity 1st layer (kg) 250 400 500Lifting capacity last layer (kg) 210 350 370Rope diameter (mm) 4 6 6.5Rope capacity 1st layer (m) 1.6 1.9 4.6Rope capacity total (m) 3.3 4 14Number of layers 2 2 4Ratio 25:1 25:1 25:1Lift per crank turn (mm) 5.8 7.5 13Required effort (kg) 6.6 18 14Duty class to DIN 15020 1Em 1Em 1EmWeight (kg) 4.1 6 12DIMENSIONS (mm)49250 kg500 kg400 kg

HAND WINCH TYPE HA-LWLashing capacity up to 2000 kg• Lashing winch with removable gearbox• Consists of a winch unit and a detachable gearbox with crank for lashingof strapping or wire rope The gearbox has a ratio of 25:1 and whenconnected to the winch unit winds 7.5mm per turn of crank• Easy to use, the winch units are permanently mounted and the self lockingdetachable gear box is mounted when a movement is requiredProduct code gearboxProduct code winchHA-LWGEARHA-LWDRUMLashing capacity 1st layer (kg) 2000Rope diameter (mm) 8Rope capacity total (m) 9Strap dimensions (mm)50x5Strap capacity (m) 3Ratio 25:1Lift per crank turn without gearbox (mm) 180Lift per crank turn with Gearbox (mm) 7.5Required effort (kg) 18Weight of winch (kg) 6.1Weight of gearbox (kg) 3.250Winch UnitGearbox Unit