Cable drag chain systems Overview - Eegholm

MP 62.2 - HeavyLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias1 PA full-ridged without bias2* PA half-ridged with bias3* PA half-ridged without bias4 Alu full-ridged with bias5 Alu full-ridged without bias6 Alu half-ridged with bias7 Alu half-ridged without bias9 Custom versionVersion:0 Standard (PA/black)5 Polypropylene (PP/blue)7 ESD (PA/light grey)9 Custom versionSample order:0622 118 150 0000MP 62.2 118MP 62.2 143MP 62.2 168MP 62.2 193MP 62.2 218MP 62.2 243MP 62.2 268MP 62.2 293MP 62.2 318MP 62.2 343MP 62.2 368MP 62.2 418MP 62.2 468MP 62.2 518MP 62.2 xxxOrder-Number:150175200225250275300325350375400450500550inside+ 320622118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu1502002503003504005001502002503003504005000012*3*4567905790Internal width = 118 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:• Extreme accelerations• Extreme speeds• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Version with/without biasAlternative chain type:• MP 65 G closed series• MP 66 easier to use• MP 62.1 greater unsupportedlengthInstallation dimensions (in mm)Radius R 150 200 250 300 350 400 500Outside height of chain link (H G) 94 94 94 94 94 94 94Height of bend (H) 424 524 624 724 824 924 1124Height of moving end connection (H MA) 330 430 530 630 730 830 1030Safety margin with bias (S V) 50 50 50 50 50 50 50Installation height with bias (H SV) 474 574 674 774 874 974 1174Safety margin without bias (S K) 20 20 20 20 20 20 20Installation height without bias (H SK) 444 544 644 744 844 944 1144Arc projection (M L) 312 362 412 462 512 562 662Bend length (L B) 766 923 1080 1237 1394 1551 186553