Cable drag chain systems Overview - Eegholm

MP 72 - HeavyLineOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias2* PA half-ridged with bias4 Alu full-ridged with bias6 Alu half-ridged with bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:0720 118 150 0000Internal width = 118 mmRadius = 150 mmRidge version = 0Version = 0Ideal operating conditions:MP 72 118MP 72 143MP 72 168MP 72 193MP 72 218MP 72 243MP 72 268MP 72 293MP 72 318MP 72 343MP 72 368MP 72 418MP 72 468MP 72 518MP 72 xxx150175200225250275300325350375400450500550inside+ 32118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu15020025030040050015020025030040050002*46909• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontal• Version with/without biasAlternative chain type:• MP 62.2/MP 82.2simpler assemblyOrder-Number:072000Installation dimensions (in mm)Radius R 150 200 250 300 400 500Outside height of chain link (H G) 102 102 102 102 102 102Height of bend (H) 422 522 622 722 922 1122Height of moving end connection (H MA) 320 420 520 620 820 1020Safety margin (S) 20 20 20 20 20 20Installation height (H S) 442 542 642 742 942 1142Arc projection (M L) 311 361 411 461 561 661Bend length (L B) 763 920 1077 1234 1548 186254