Cable drag chain systems Overview - Eegholm

MP 102.2 - HeavyLine 2nd generationOrder variantsPerformance (order code)Ridge version (order code) *= standardRadius (order code)in mmInternal width (order code)in mmOutside widthin mmThe radii can be combinedwith any internal widthRidge version:0 PA full-ridged with bias2* PA half-ridged with bias4 Alu full-ridged with bias6 Alu half-ridged with bias9 Custom versionVersion:0 Standard (PA/black)9 Custom versionSample order:1022 118 250 0000Internal width = 118 mmRadius = 250 mmRidge version = 0Version = 0Ideal operating conditions:MP102.2 118MP102.2 143MP102.2 168MP102.2 192MP102.2 218MP102.2 243MP102.2 268MP102.2 293MP102.2 318MP102.2 343MP102.2 368MP102.2 418MP102.2 468MP102.2 518MP102.2 xxx164189214239264289314339364389414464514564inside+ 46118143168193218243268293318343368418468518>118-600118143168193218243268293318343368418468518Alu25030040050025030040050002*46909• Extreme accelerations• Extreme speeds• Extreme self supporting lengths• Very high additional loads• Both sides must be opened• Aluminium frame bridge in variablelengths• Flexible internal separation• Rotated 90°, unsupported• Rotated 90°, horizontal• version with bias (RV) for greaterself supporting length• Version with bias (RV) for glidingarrangementOrder-Number:102200Installation dimensions (in mm)Radius R 250 300 400 500Outside height of chain link (H G) 135 135 135 135Height of bend (H) 655 755 955 1155Height of moving end connection (H MA) 520 620 820 1020Safety margin (S) 50 50 50 50Installation height (H S) 705 805 1005 1205Arc projection (M L) 468 518 618 718Bend length (L B) 1169 1326 1640 195456