Technical Data FLIR A305sc - FLIR Customer Support Center - Flir ...

Technical DataFLIR A305scPart number:42901-1001Copyright© 2014, FLIR Systems, Inc.All rights reserved worldwide. Names and marksappearing herein are either registered trademarks ortrademarks of FLIR Systems and/or its subsidiaries. Allother trademarks, trade names or company namesreferenced herein are used for identification only andare the property of their respective owners.January 13, 2014, 01:16 PMCorporate HeadquartersFLIR Systems, Inc.27700 SW Parkway Ave.Wilsonville, OR 97070USATelephone: +1-503-498-3547WebsiteImaging and optical dataIR resolution320 × 240 pixelshttp://www.flir.com Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mKCustomer support Field of view (FOV) / Minimum focus distance 25° × 18.8° / 0.4 m (1.31 ft.)http://support.flir.comLegal disclaimerSpecifications subject to change without further notice.Camera models and accessories subject to regionalmarket considerations. License procedures may apply.Information and equipment described herein mayrequire US Government authorization for exportpurposes. Diversion contrary to US law is prohibited.Focal lengthSpatial resolution (IFOV)Lens identificationF-number 1.3Image frequencyFocus18 mm (0.7 in.)1.36 mradAutomatic9 HzAutomatic or manual (built in motor)Detector dataFocal Plane Array (FPA) / Spectral range Uncooled microbolometer / 7.5–13 µmDetector pitch 25 µmDetector time constantTypical 12 msMeasurementObject temperature rangeAccuracy–20 to +120°C (–4 to +248°F)0 to +350°C (+32 to +662°F)±2°C (±3.6°F) or ±2% of readingMeasurement analysisAtmospheric transmission correctionOptics transmission correctionEmissivity correction Variable from 0.01 to 1.0Reflected apparent temperature correctionExternal optics/windows correctionMeasurement correctionsAutomatic, based on inputs for distance, atmospherictemperature and relative humidityAutomatic, based on signals from internal sensorsAutomatic, based on input of reflected temperatureAutomatic, based on input of optics/window transmissionand temperatureGlobal object parameters42901-1001_en_40.xml, ver. 1.26Page 1 (of 4)EthernetEthernetEthernet, typeControl and imageGigabit EthernetEthernet, standard IEEE 802.3Ethernet, connector typeEthernet, communicationhttp://www.flir.comRJ-45TCP/IP socket-based FLIR proprietary and GenICam protocol

FLIR A305scP/N: 42901-1001© 2014, FLIR Systems, Inc.All rights reserved worldwide.EthernetEthernet, image streamingEthernet, protocols16-bit 320 × 240 pixels @ 9 Hz- Signal linear- Temperature linear- RadiometricGigE Vision and GenICam compatibleTCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp,SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnPDigital input/outputDigital input, purposeDigital inputDigital output, purposeDigital outputDigital I/O, isolation voltageDigital I/O, supply voltageDigital I/O, connector typeImage tag (start, stop, general), Image flow ctrl. (Streamon/off), Input ext. device (programmatically read)2 opto-isolated, 10–30 VDCOutput to ext. device (programmatically set)2 opto-isolated, 10–30 VDC, max 100 mA500 VRMS12/24 VDC, max 200 mA6-pole jackable screw terminalPower systemExternal power operationExternal power, connector typeVoltage12/24 VDC, 24 W absolute max2-pole jackable screw terminalAllowed range 10–30 VDCEnvironmental dataOperating temperature rangeStorage temperature rangeHumidity (operating and storage)–15°C to +50°C (+5°F to +122°F)–40°C to +70°C (–40°F to +158°F)IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C(+77°F to +104°F)EMC • EN 61000-6-2:2001 (Immunity)• EN 61000-6-3:2001 (Emission)• FCC 47 CFR Part 15 Class B (Emission)Encapsulation IP 40 (IEC 60529)Bump 25 g (IEC 60068-2-29)Vibration 2 g (IEC 60068-2-6)Physical dataWeightCamera size (L × W × H)Tripod mountingBase mountingHousing material0.7 kg (1.54 lb.)170 × 70 × 70 mm (6.7 × 2.8 × 2.8 in.)UNC ¼"-20 (on three sides)2 × M4 thread mounting holes (on three sides)Aluminum42901-1001_en_40.xml, ver. 1.26Page 2 (of 4)http://www.flir.com

FLIR A305scP/N: 42901-1001© 2014, FLIR Systems, Inc.All rights reserved worldwide.Shipping information• Infrared camera with lens• Calibration certificate• Downloads brochure• Ethernet cable• FLIR apps card• FLIR ResearchIR scratchcard• FLIR Tools download card• Getting Started Guide• Hard transport case• Important Information Guide• Mains cable• Optics brochure• Power cable, pig-tailed• Power supply• Service & training brochure• Thank you card• User documentation CD-ROM• Utility CD-ROM• Warranty extension card42901-1001_en_40.xml, ver. 1.26Page 3 (of 4)http://www.flir.com

1 2 3 4 5 6 7 8 9 10Camera with Lens IR f=10 mm (45°)AAB2,62in66,4mmM4 (6x)UNC 1/4"-20 (3x)BC0,94in24mm (3x)C© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.1,38in35mm0,47in12mm (3x)DEFGH47mm1,85in1,31in33,3mm (2x)1,33in34mm1,51in38,4mm1 2 34568,37in213mm6,75in171mm71,38in35mm2,76in70mm-Modified2012-04-18 CAHADenomination-Check1,31in33,3mmDrawn by2,76in70mmR&D ThermographyBasic dimensions FLIR A3xx/SC3xxFor additional dimensions see page 1SizeA3Scale1:1Drawing No.T125002Sheet3(8)SizeADEFG

1 2 3 4 5 6 7 8 9 10Camera with Lens IR f=30 mm (15°)AAB2,06in52,3mm (3x)M4 (6x)UNC 1/4"-20 (3x)BC0,94in24mm (3x)1,38in35mm0,47in12mm (3x)C© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.DEFGH58mm2,28in1,31in33,3mm (2x)0,77in20mm0,95in24,3mm1 2 34567,82in199mm6,75in171mm71,38in35mm2,76in70mm-Modified1,31in33,3mm2,76in70mm2012-04-18 CAHADenomination-CheckDrawn byR&D ThermographyBasic dimensions FLIR A3xx/SC3xxFor additional dimensions see page 1SizeA3Scale1:1Drawing No.T125002Sheet4(8)SizeADEFG

1 2 3 4 5 6 7 8 9 10Camera with Lens IR f=76 mm (6°) incl supportUNC 1/4"-20 (5x)AAB3,48in88,5mmB2,14in54,3mmC1,77in ±0,0045mm ±0,12,15in54,5mmC3,54in ±0,0090mm ±0,1© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.DEFGH3,78in96mm1,89in48mm (2x)1,31in33,3mm (2x)Lens supportOptional3,98in101,1mmBase supportOptional4,17in105,8mm1 2 345611,03in280mm4,29in109mm6,76in172mm7-Modified1,89in48mm2012-04-18 CAHADenomination-Check2,14in54,3mmDrawn by1,38in35mm4,27in108,5mm2,76in70mmR&D ThermographyBasic dimensions FLIR A3xx/SC3xx0,31in8mmFor additional dimensions see page 1SizeA3Scale1:1Drawing No.T125002Sheet5(8)SizeADEFG

1 2 3 4 5 6 7 8 9 10Camera with Close-up lens 1X (25 µm) incl supportAObject plane0,83inWD = 21mm7,67in194,8mmM4 (6x)UNC 1/4"-20 (3x)AB55mm2,17in0,94in24mm (3x)B1,62in41,3mmCC© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.DEFGH0,47in12mm (3x)2,68in68mm6,38in162mm6,56in166,8mm1,31in33,3mm (2x)Lens supportOptional1 2 345613,43in341mm6,76in172mm7-Modified2,76in70mm2012-04-18 CAHADenomination-CheckDrawn byR&D Thermography3,25in82,5mmBasic dimensions FLIR A3xx/SC3xx1,62in41,3mmFor additional dimensions see page 1SizeA3Scale1:1Drawing No.T1250021,31in33,3mmSheet6(8)SizeADEFG

1 2 3 4 5 6 7 8 9 10Camera with Close-up lens 2X (50 µm)AABObject plane1,3inWD = 33mm mm2,49in63,2mm (3x)M4 (6x)UNC 1/4"-20 (3x)BC0,94in24mm (3x)1,38in35mm0,47in12mm (3x)C© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.DEFGH55mm2,17in1,31in33,3mm (2x)1,2in30,5mm1,39in35,2mm8,25in209,5mm6,76in172mm1 2 345671,38in35mm-2,76in70mmModified2012-04-18 CAHADenomination-Check1,31in33,3mmDrawn by2,76in70mmR&D ThermographyBasic dimensions FLIR A3xx/SC3xxFor additional dimensions see page 1SizeA3Scale1:1Drawing No.T125002Sheet7(8)SizeADEFG

1 2 3 4 5 6 7 8 9 10Camera with Close-up lens 4X (100 µm)AABM4 (6x)B3,11inWD = 79mm mm2,49in63,2mm (3x)UNC 1/4"-20 (3x)Object planeC0,94in24mm (3x)C© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise,without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply.Product may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Diversion contrary to US law is prohibited.DEFGH1,38in35mm55mm2,17in0,47in12mm (3x)1,31in33,3mm (2x)1,2in30,5mm1,39in35,2mm8,25in209,5mm1 2 34566,76in172mm71,38in35mm2,76in70mm-Modified2012-04-18 CAHADenomination-Check1,31in33,3mmDrawn by2,76in70mmR&D ThermographyBasic dimensions FLIR A3xx/SC3xxFor additional dimensions see page 1SizeA3Scale1:1Drawing No.T125002Sheet8(8)SizeADEFG