Functions for SIMATIC S7-300 and S7-400 Acyclic ... - Jonweb FA
Functions for SIMATIC S7-300 and S7-400 Acyclic ... - Jonweb FA
Functions for SIMATIC S7-300 and S7-400 Acyclic ... - Jonweb FA
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User Manual1Communication inprogress?YesEndNoCPU in STOP?Yes• Read out module status of the CPU• Evaluate diagnostic buffer of the CPU• Check data block lengthsNo• Check parameterization of the drives• Evaluate communication status word<strong>and</strong> error flags of the SFC58/59 inDBSLà 3.32.3 Parameterization of the drivesThe drives are linked to the PROFIBUS-DP via supplementary modules or interface modules in the drives.DPV1 communication is currently possible with the following drives <strong>and</strong> boards:• MASTERDRIVES FC, VC with CU2, SC, Motion Control, Vector Control with CUVC <strong>and</strong> SIMOREG DCMASTER with communication board CBP• MICRO-/MIDIMASTER 6SE32 with interface module CB15• COMBIMASTER with interface module CB155.See the relevant module or device instruction manual <strong>for</strong> parameterization of these interfaces in the units.Please see Section 6.5 <strong>for</strong> examples.<strong>SIMATIC</strong> <strong>S7</strong> PROFIBUS-DP <strong>Functions</strong>© Siemens AG 1998 All Rights ReservedE20125-C0011-S302-A2-7600 5
Change language