Model CL-100 Bipolar Temperature Controller - Harvard Apparatus UK

More documents

Recommendations

Info

12Operation (Cont’d)Warner Instruments Bipolar Temperature Controller Model CL-100Manual ModeIn manual mode,the MANUAL VOLTAGE control (Item K) is used to set theoutput voltage to a fixed value. In manual mode, the SET TEMPERATUREcontrol (Item H) is disabled, as is the feedback system of the CL-100.Operation is again straightforward. Set the CL-100 to accept internalcommands by setting the INTERNAL/EXTERNAL SELECT control (Item J) tointernal. Place the CL-100 into manual mode by switching the COOLINGMODE SWITCH (Item C) to manual. Switch the METER (Item B) to OutputVolts and adjust to the desired set-point using the MANUAL VOLTAGEcontrol (Item K).Alternatively, the CL-100 can be commanded using external inputs. Set theCL-100 to external commands by setting the INTERNAL/EXTERNALSELECT control (Item J) to external. In this mode the CL-100 will acceptexternal voltage commands at the EXT VOLT SET BNC (Item P) located onthe instrument rear panel.In this mode, the instrument operates as a 0-12 VDC power supply that canprovide up to 1.5 A of current to a device. Use this mode with heatersystems that will operate properly with a fixed voltage and lack feedbackthermistors.Publication 5702-001-REV-Awww.warneronline.com
Appendix13Warner Instruments Bipolar Temperature Controller Model CL-100SpecificationsMaximum Output VoltageMaximum Output CurrentManual Voltage RangeMaximum Output PowerPower RequirementsPower Fuse (5 x 20 mm)Front Panel Input±15 VDC2.4 A0 to ±15 VDC18 W into a 8 W load100-130 or 200-260 VAC, 50/60 Hz, 80 VA0.8 A Slow-Blow for 100-130 VAC0.4 A Slow-Blow for 200-260 VACExternal thermistor(BNC, calibrated to 10.0 kW at 25°C )Front Panel Recorder Outputs Monitor Temp Out (BNC, 100 mV/°C )Control Temp Out (BNC, 100 mV/°C )Rear Panel Inputs External Temperature Set (BNC, 100 mV/°C )External Voltage Set (BNC)Heater/Cooler Device (15-pin D connector)Temperature Range Peltier 0 to 50°CResistive: Ambient to 65°CMeter Display3.5 digit LED display of °C or VMeter Readouts Set Temperature (°C )Control Temperature (°C )Monitor Temperature (°C )Output Voltage (V )Enclosure, H x W x DWeight20.0 x 8.9 x 25.4 cm5.6 kgAccessories and Replacement PartsCatalog No. Model Product64-1427 ACC-1 Adapter cable for heater only componentsPublication 5702-001-REV-Awww.warneronline.com
Page 1 and 2: BipolarTemperatureControllerModel C
Page 3 and 4: Table of Contents1Warner Instrument
Page 5 and 6: Introduction3Warner Instruments Bip
Page 7 and 8: Control Description5Warner Instrume
Page 9 and 10: Control Description (Cont’d)77War
Page 11 and 12: 9Control DescriptionWarner Instrume
Page 13: 11OperationWarner Instruments Bipol
Page 17: Warranty & Service (Cont’d)15Warn

Model CL-100 Bipolar Temperature Controller - Harvard Apparatus UK

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?