Model CL-100 Bipolar Temperature Controller - Harvard Apparatus UK

Control Description5Warner Instruments Bipolar Temperature Controller Model CL-100Front PanelA schematic of the face panel of the CL-100 is shown below. Importantcomponents are identified by letter (A-H, J-N). Refer to this diagram as anaid in identification of the described components.Power Switch (Item A)Supplies power to the CL-100.Meter Selector Switch and Meter (Item B)THE SELECTOR SWITCH selects the parameter displayed on the associatedMETER. Included options are Set Temp, Control Temp, Monitor Temp, andOutput Volts and are described below.Set Temp reports the adjustment from either the SET TEMPERATURE control(Item H) or the EXT TEMP SET BNC (Item Q). Displayed units are °C.Control Temp reports the actual temperature of the feedback thermistor situatedwithin the heater/cooler device being used.The data is informativeonly and is in units of ºC.Monitor Temp reports the temperature of the sensor thermistor which connectsvia the MONITOR TEMP IN BNC (Item F).This provides a convenientmeans to determine the temperature of any point of interest within yoursetup. Displayed units are ºC.Output Volts reports the adjustment from either the MANUAL VOLTAGEcontrol (Item K) or the EXT VOLT SET BNC (Item P). Displayed units are V.The METER also provides an indication that the main POWER is on.Publication 5702-001-REV-Awww.warneronline.com