Heating with air and geothermal heat - Viessmann

Heat pumps Vitocal 200-GTwo heating circuits for individualheating convenienceThe convenient brine/water heat pumpoffers all functions required for using aheat pump in a new detached home. Theweather-compensated Vitotronic 200 controlunit allows two separate heating circuits tobe connected.Installation and assembly made easyThe Vitocal 200-G is delivered completewith integral high efficiency pumps forthe brine and heating circuits, circulationpump for cylinder heating, and the safetyassembly. This means the heating contractorcan complete the installation quicklyand inexpensively.Prepared for subsidiesWith the installation of an optional heatmeter, the purchase of the Vitocal 200-Gheat pump can be subsidised with publicgrants [in Germany]. It would then meet therequirements of the Renewable EnergiesHeat Act (EEWärmeG).A further benefit is the option to temporarilyfit a booster heater, for example for screeddrying. The heating contractor would fit thebooster heater for a specific period using amulti connect system.Easy to use Vitotronic 200 control unitThe Vitotronic 200 heat pump control unit,with its graphic interface, is simple andintuitive to use. The most important valuescan be seen at a glance. The natural coolingfunction is already integrated. To use this, anNC-Box from the range of accessories mustbe added to the Vitocal 200-G.1234Vitocal 200-G51 Vitotronic 200 heat pump control unit2 Condenser3 Large area evaporator for efficientheat transfer4 High efficiency pump5 Hermetically sealed Compliant scrollcompressor