Heating with air and geothermal heat - Viessmann

48/49VITOCAL 300-AWith modulating air/water heat pumps, advanced technology guarantees the highest levelof efficiency in any operating state.The energy available in the air is extremelyeasy to use for heating buildings anddomestic hot water. It is even possible at lowtemperatures in winter, when the demandfor heat is high. This is no problem for theVitocal 300-A air source heat pump. It isparticularly efficient and even at an outsidetemperature of 6 °C can still deliver a flowtemperature of 60 °C.Heating efficiently with airThe Vitocal 300-A air/water heat pumpis extremely efficient and achieves highseasonal performance factors. Its output issufficient for both central and DHW heating.This makes bills for fossil fuels a thing of thepast. Only electrical power for the heat pumpsystem is required.Higher convenience, lower investmentNo additional investment is required to installa Vitocal 300-A air source heat pump. Thereis no drilling work for geothermal probes orlaying a geothermal collector. You may notneed a costly buffer cylinder or primary storesystem either, thanks to output matched toyour needs and optimum operation.Finally, depending on the building structure,the Vitocal 300-A can be sited outsideor inside.The Vitocal 300-A iscertified in accordancewith the EHPA qualityseal for Heat Pumps.